Alarm Cast Administrator Provider: Direct
Do one of the following to configure the Direct provider option.
- Select the Providers folder in the Alarm Cast Administrator left-pane. Click New Provider on the toolbar. Select Direct in the Devices field.
- Expand a Direct device folder in the Alarm Cast Administrator left-pane. Select the Providers folder. Click New Provider on the toolbar.
Direct is automatically selected in the Devices field.
Direct provider tabs are as follows.
- Details Tab
- Connection Tab
- Common Tabs for Providers
Details Tab
Select the Details tab; options are as follows.
Field | Description | |
---|---|---|
Server | ||
Name | Name associated with the provider. Note: The name helps users identify the provider; it does not affect Pager functionality. | |
Coverage | Geographical area in which the provider can deliver messages. | |
Device | Device to associate with this Provider. Note: Select the device from the dropdown list | |
Protocol | ||
Max. Connection | Not required. | |
Max. Transactions | Not required. | |
Alpha Length | Maximum length of alphanumeric pages allowed by the provider. | |
Numeric Length | Maximum length of numeric pages allowed by the provider. Messages longer than this will be split into segments and sent automatically. | |
Protocol | Language used for communicating with the messaging service provider. In this case, TAP. | |
Communications | ||
Byte Size | Number of data bits encoding a character. The value can be 7 or 8. | |
Parity |
Method of detecting some errors in transmission.
The parity bit in each character can be set to any of the following.
|
|
Stop Bits | Stop bits sent at the end of every character allow the receiving signal hardware to detect the end of a character and to resynchronize with the character stream. Options are 0, 1, 1.5, and 2. Electronic devices usually use one stop bit. | |
Speed | Rate of the transmission. | |
Modem Compression | Read-only. | |
Error Correction | Read-only. |
Connection Tab
Select the Connection tab; options are as follows.
Field | Description | |
---|---|---|
Address 1 | ||
Address | Not applicable. | |
User Name | Optional. | |
User Password | Optional. | |
Address 2 | ||
Address | ||
User Name | Optional. | |
User Password | Optional. | |
Description | ||
Notes | Optional. |
Click Save.
Result: The provider will be listed under the Provider folder as well as the Device - Provider sub-folder of the modem device it is associated with.