TML Groups

About TML Groups

A TML Group is a group of TMLs that represent a component of an asset.

Details

Suppose you have an asset, Piping Circuit 101, ) which contains three components, Line A, Line B, and Line C. On those components, there are multiple TMLs. The following image illustrates this example, where the components are represented by shaded regions, and the TMLs are represented by stars.

For a given asset, a TML Group can represent:

  • All TMLs that exist on that asset. You would create a TML Group to represent all TMLs that exist on an entire asset if the asset is a standalone asset. You would create one TML Group to represent all of the stars.

  • A subset of TMLs that exist on one or more components that belong to the asset. Using this option, you could create:

    • One TML Group per component, where the TML Group represents all TMLs that exist on that component. You would create three TML Groups, one to represent each set of stars.

      -or-

    • One TML Group for multiple components, where the TML Group represents all TMLs that exist on those components. Using the previous Piping Circuit 101 example, you could create two TML Groups, where one represents the blue and green stars and one represents the orange stars.

Additionally, throughout the life of the asset, you might identify one or more TMLs within a TML Group that you want to analyze separately from other TMLs. In this case, you can create additional TML Groups to represent any subdivision of an existing group of TMLs.

For example, suppose that an asset that you are analyzing in Thickness Monitoring represents a shell and tube heat exchanger. The shell and tube heat exchanger has two components, the shell side and the tube side, each with its own process flow. Since the corrosion environments of these components will differ, you might create the following TML Groups:

  • TML Group - Shell Side
  • TML Group - Tube Side

When you first begin analysis on the shell and tube heat exchanger, you are not sure what the TM corrosion data will show, (i.e., whether TML Group - Shell Side or TML Group - Tube Side will have more aggressive corrosion). After you have completed some analysis on the shell and tube heat exchanger, you notice that a subset of TMLs on the shell side near the nozzle have very high corrosion rates. At this point, you create a third TML Group, TML Group - Shell Nozzle to represent this component, and you move the TMLs associated with this component from TML Group - Shell Side to TML Group - Shell Nozzle.

Regardless of what they represent, all TML Groups in a Corrosion Analysis will be linked directly to a single asset. If you decide to use TML Groups, all TMLs in your Corrosion Analysis should be linked directly to TML Groups (rather than the asset to which the TML Groups are linked).

About Equipment and TML Groups

Each Corrosion Analysis begins with an asset for which you want to monitor corrosion. The asset you want to monitor may consist of a number of components you want to monitor independently. If so, you can create a TML Group for each component to contain the TMLs that are for that specific component.

Details

Before you can conduct a Corrosion Analysis on an asset, an Equipment record must exist in the GE Digital APM database to represent the asset on which you want to perform the corrosion analysis. The types of records that you create in your Corrosion Analyses will depend upon what your Equipment records represent.

Before you can create TML Groups, an Asset Corrosion Analysis and Corrosion Analysis Settings must be created for an asset, represented by an Equipment record. Equipment records can be created manually via Record Manager, or they may be loaded into your database from another data source (e.g., SAP). After assets exist, you can create TML Groups.

Example: Using Piping Circuits to define TML Groups

Consider, for example, a piping circuit that contains three piping lines. You might want:

About Corrosion Analyses that Include TML Groups

You should include TML Groups in your Corrosion Analyses if any of the assets that you will analyze in TM consist of components that you want to analyze individually, or you want to analyze corrosion data for certain groups of TMLs on an asset or component. What the TML Groups that you create represent will depend upon whether the associated Equipment record represents a standalone asset or an asset that contains components.

If you use this method:

  • You must configure preferences for the Equipment family.
  • Each TML Group that you create will be linked to an Equipment record representing the asset through the Has TML Group relationship.
  • An Asset Corrosion Analysis and Corrosion Analysis Settings will be created and linked to the Equipment record representing the asset, as well as each TML Group that is linked to that asset.
  • All TMLs that you create will be linked directly to a TML Group. In this case, TMLs should not be linked directly to the asset.

Details

The following diagram illustrates the structure of Corrosion Analyses that include TML Groups. Specifically, this diagram illustrates the records and links that would exist if a Corrosion Analysis included one Equipment record (representing an asset), which is linked to three TML Groups. The boxes in the diagram are labeled according to the records that they represent, and the lines connecting the boxes represent the links between these records in a Corrosion Analysis.

The following table provides information on how the records that are illustrated in the diagram are created manually or automatically.

RecordNotes
Corrosion Analysis Settings

Manually for Equipment records

-and-

Automatically for TML Groups that you create and link to those equipment records.

Asset Corrosion Analysis Automatically for Equipment records and TML Groups, but at different points in the workflow.
Equipment Manually.
Thickness Measurement Manually.
Thickness Measurement Location

Manually.

Thickness Monitoring Task Automatically (when a Corrosion Analysis Setting are created).
TML Corrosion Analysis Automatically (when a Thickness Measurement Location record is saved).

About Corrosion Analyses that Exclude TML Groups

You can exclude TML Groups from your TM analyses if none of the equipment that you will analyze in TM contain components, or if you want to analyze an asset without considering the components individually.

If you use this method:

  • Asset Corrosion Analyses and Corrosion Analysis Settings will be created and linked to each Equipment record.
  • All TMLs that you create will be linked directly to Equipment records representing assets.

Details

The following diagram illustrates the structure of Corrosion Analyses that do not include TML Group records. The boxes in the diagram are labeled according to the records that they represent, and the lines connecting the boxes represent links between these records in a Corrosion Analysis.

The following table provides information on how the records illustrated in the diagram are created manually or automatically.

RecordNotes
Corrosion Analysis Settings

Automatically.

Asset Corrosion Analysis Automatically (when a Corrosion Analysis Setting are created for an Equipment record).
Equipment Manually.
Thickness Measurement Manually.
Thickness Measurement Location

Manually.

Thickness Monitoring Task Automatically (when a Corrosion Analysis Setting are created).
TML Corrosion Analysis Automatically (when a Thickness Measurement Location record is saved).

About TML Groups and RBI Components

You can use TML Corrosion Analyses to determine corrosion rates in Risk Based Inspection (RBI). To complete the analysis, you must perform key steps in this workflow within the RBI module. If you want to specify that TML Group values should be used to calculate RBI corrosion rate values, you can perform this step using TM rather than RBI. Before you can link an RBI Component to a TML Group, you must first create an RBI Component for the asset, and then set the Source of Calculated Corrosion Rate field for the component to Component.

Note: For more information on RBI Components, see the Risk Based Inspection section of the documentation.

Details

To complete this task, you will need to link a TML Group to a Criticality Calculator RBI Component. When you link a Criticality Calculator RBI Component to a TML Group, RBI corrosion rate values for the RBI Analysis that you create are based on the average of the following values in the TML Corrosion Analysis:

  • Long Term Corrosion Rate
  • Short Term Corrosion Rate

In other words, the values in the preceding list will determine the following values in the Criticality Int. Corr. Deg. Mech. Eval record associated with the RBI Analysis that is created from the linked TML Group record:

  • Short Term Avg. Corr. Rate
  • Long Term Avg. Corr. Rate
Note: When you use TM to select a TML Group to link to a Criticality Calculator RBI Component, you will do so for only one TML Group at a time. Alternatively, via RBI, you can select more than one TML Group at a time to link to a Criticality Calculator RBI Component.

Create a TML Group

Procedure

  1. Access the Analysis Overview workspace for the asset for which you want to create a TML Group.
  2. In the left pane, select , and then select TML Group.

    The Select Analysis Type window appears.

  3. On the Select Analysis Type window, select either UT or RT for the analysis type, and then select Done.

    The new TML Group is created as a subcomponent of the asset.

Results

  • The TML Group ID is automatically generated.
  • The TML Group inherits the Corrosion Analysis Settings from the asset.
  • You can make changes to the TML Group by accessing the datasheet.

Access a Thickness Measurement Location (TML)

About this task

This topic describes how to access a TML via the Analysis Overview workspace for an asset or TML Group. You can also access the Analysis Overview workspace directly for a TML.

Procedure

  1. Access the Analysis Overview workspace for the asset or TML Group that contains the TML that you want to access.
  2. In the workspace, select the TMLs tab.

    The TMLs section appears, displaying the following information:

    • If you selected an asset, a list of TMLs linked to the asset appears. This list includes TMLs linked to TML Groups or subcomponents linked to the selected asset.
    • If you selected a TML Group, a list of TMLs linked to the TML Group appears.
    • The color-coding categories appear at the top of the section. The number in parentheses next to each category indicates the number of TMLs in each category.
    • The visual cue that appears in each row indicates the color-coding category that is applicable to the TML.

    Tip:

    In the TMLs section, you can:

    • Select a color-coding category to filter the list of TMLs in that category. For example, if you select Below T-Min, the TMLs that meet the criterion for Below T-Min appear. You can remove the filter by selecting the same category again.
    • Delete a TML by selecting .
  3. In the row containing the TML that you want to access, select the link.

    The Analysis Output section appears, displaying a summary of the associated TML Corrosion Analysis.

  4. If you want to access the TML datasheet, select the TML Details tab.

    The TML Details section appears, displaying the TML datasheet.

    Tip: If needed, modify values in the available fields, and then select to save your changes.

Configure the Thickness Monitoring Location (TML) Section

About this task

You can configure the grid in the TMLs section by adding or removing fields using the Choose Columns window.

Note: The Choose Columns window displays all TML Corrosion Analysis and TML fields except for the fields listed in the Field Mappings in the TMLs Grid topic.

Procedure

  1. Access the Analysis Overview workspace containing the TMLs section that you want to configure.
  2. In the Analysis Overview workspace, select the TMLs tab.

    The TMLs section appears.

  3. In the TMLs section, select .

    The Choose Columns window appears.

  4. In the Choose Columns window, in the Available Fields section, select the fields you want to appear in the grid, and then select .
    Tip: To remove a field from the grid, in the Choose Columns window, in the Display Fields section, select the field you want to remove from the grid, and then select .
  5. Optionally, to reorder the fields in the Display Fields section, select
  6. Select OK.

    The selected fields appear in the TMLs section.

Results

Copy Thickness Measurement Locations (TMLs)

Procedure

  1. Access the TML that you want to copy.
  2. In the upper-right corner of the page, select , and then select Copy TML.

    The Copy TML window appears.

  3. Complete the required fields:
    • In the Number of Copies box, use the arrows to indicate how many copies of the selected TML you want to create.
    • In the TML ID field, enter a unique name for the copied TML
    • Important: You cannot update the TML ID field if are copying more than one TML. If you copy multiple TMLs, this field will be populated automatically.
  4. Select OK.
    The Analysis Overview workspace appears, and the newly copied TMLs appear in the left pane.

Relocate a Thickness Measurement Location (TML)

About this task

You can relocate TMLs to move TMLs from a source asset or TML Group to a different target asset, or to a TML Group or subcomponent linked to that target asset. If you need to move TMLs to or between subcomponents linked to the same asset, use the Organize TMLs method.

Procedure

  1. Access the Analysis Overview workspace for the asset the TMLs you want to relocate.
  2. Select , and then select Relocate TMLs.

    The Relocate TMLs workspace appears.

  3. In the list, select the check boxes corresponding to the TMLs that you want to relocate.
    Note: If you do not see the TMLs that you expect, or want to limit the list, in the upper-left corner of the workspace, confirm the setting in the Analysis Type list, and whether the Active TMLs Only check box is selected.
  4. Select Select an Asset.

    The Select Target window appears.

  5. In the Asset Hierarchy, navigate to the asset to which you want to relocate the TMLs.

    In the Selected Item box, the Asset ID for the asset appears. In the Available Subcomponents box, a list of linked subcomponents appears.

  6. If you want to relocate the TMLs to a subcomponent, such as a TML Group, in the Available Subcomponents box, select the subcomponent to which you want to relocate the TMLs.
  7. Select Done.

    The TMLs are relocated to the selected asset or subcomponent.

Results

  • The analyses of the affected assets and subcomponents are recalculated.

Renew a Thickness Measurement Location (TML)

Procedure

  1. Access the Analysis Overview workspace for the asset or TML Group that contains the TMLs that you want to renew.
  2. Select , and then select Renew TMLs.

    The Renew TMLs window appears, displaying a list of the TMLs linked to the asset or TML group.

  3. In the list, select the check boxes corresponding to the TMLs that you want to renew.
    Note: If you do not see the TMLs that you expect, or want to limit the list, in the upper-left corner of the window, confirm the setting in the Analysis Type box, and whether the Active TMLs Only check box is selected.
  4. Select Renew TMLs.

    The selected TMLs are renewed.

Organize Thickness Measurement Locations (TMLs)

About this task

You can organize TMLs to move TMLs to or between TML Groups and subcomponents associated with the same asset. If you want to move TMLs to another asset, or to a subcomponent of that asset, you should relocate those TMLs.

Procedure

  1. Access the Analysis Overview workspace for the TML Group or subcomponent to which you want to move TMLs.
  2. In the upper-right corner of the workspace, select , and then select Organize TMLs.

    The Organize TMLs workspace appears, displaying a list of TMLs linked to the asset to which the TML Group or subcomponent you selected in step 1 is linked. This list includes TMLs linked to all TML Groups and subcomponents that the asset contains, including the one that you selected in step 1.

    Note: If you do not see the TMLs that you expect, or want to limit the list, in the upper-left corner of the workspace, confirm the setting in the Analysis Type list, and whether the Active TMLs Only check box is selected.
  3. Select the check boxes corresponding to the TMLs that you want to move to the TML Group or subcomponent.
  4. Select Move.

    The selected TMLs are moved to the TML Group or subcomponent, and the corrosion analysis is recalculated.

Exclude a Thickness Monitoring Location (TML)

Before you begin

Procedure

  1. Access the Analysis Overview workspace for the asset or TML Group that contains the TMLs that you want to exclude.
  2. In the workspace, select the TMLs tab.

    A list of TMLs contained in the analysis appears in the workspace.

  3. In the upper-right corner of the workspace, select , and then select Exclude TMLs.

    The Exclude TMLs window appears, providing a list of TMLs in the analysis. If a TML has already been excluded, the corresponding check box is selected.

  4. In the list, select the check boxes corresponding to the TMLs that you want to exclude.
    Note: If you do not see the TMLs that you expect, or want to limit the list, in the upper-left corner of the window, confirm the setting in the Analysis Type box, and whether the Active TMLs Only check box is selected.
  5. Select Done.

    The selected TMLs are excluded from the analysis.

    Tip: At this time, you can calculate the Analysis with the newly excluded TMLs by selecting .

Access the TM Quick View Page

About this task

The TM Quick View page displays a list of TMLs in an asset or TML Group, along with details on the corrosion rate, next inspection date, measurements taken in each month, and so on.

Procedure

  1. Access the Analysis Overview workspace for the asset or TML Group whose TMLs you want to view.
  2. Select , and then select Quick View.

    The TM Quick View page appears.

    Note: The unit of measure displayed on the grid is based on your selections on the Units of Measure and Conversion Set page.

    The TM Quick View page displays the following information:

    • From the Thickness Measurement Location family:

      • Minimum Thickness
      • TML Analysis Type
      • TML Asset ID
      • TML ID

        Tip: You can select the link in the TML ID column to access the Analysis Overview page corresponding to a TML.
    • From the TML Corrosion Analysis family:

      • Corrosion Rate
      • Projected T-Min Date
      • Scheduled Next Inspection Date
    • From the Thickness Measurement family:

      • <Month><Year>: Contains a list of measurements for the month and year displayed in the column heading, separated by a semicolon.

    Note: By default, the TM Quick View page displays measurements taken in the past ten years. If you want to modify the data range, in the upper-left corner of the page, select

Delete a Thickness Monitoring Location (TML) Group

Before you begin

  • When you delete a TML Group, the following linked records are also deleted:
    • TMLs
    • Thickness Measurements
    • Corrosion Analysis Settings
    • TML Corrosion Analyses
    • Asset Corrosion Analyses

Procedure

  1. Access the Analysis Overview workspace for the TML Group that you want to delete.
  2. Select , and then select Delete.

    A message appears, asking you to confirm that you want to delete the TML Group.

  3. Select Yes.

    The TML Group is deleted.