8.3.4. Create a New Output Logic Module (OLM)

About this task

The Output Logic Module will set the attributes of your product with the point values that you set using the CIMPLICITY screen.

A Create an AddParts Output Logic Module
B Select the Set Attribute with Point Function Block
C Configure the Set Attribute with Point Block
  1. Create an AddParts Output Logic Module

Procedure

  1. Click the Popup Menu button to the right of the Output Logic Module field.
  2. Select New on the Popup menu.

    An Output Logic Wizard opens.

  3. Enter the following.
    1 Name  AddParts
    2 Description Add Parts RCO Output Logic
    3
    		Click the New button  on the Output Logic Wizard toolbar.

    A Select a Function Block browser opens.

    1. Select the Set Attribute with Point Function Block
  4. Expand the Core folder in the Select a Function Block browser.
  5. Double-click Set Attribute with Point.

Results

A Set Attribute with Point dialog box opens.

  1. Configure the Set Attribute with Point Block

Do the following.

1 Description
2 Region Id
3 Region Location
4 Item Class
5 Attribute ID
6 Point Name
7 OK Button
1 Description

Enter Set CPU Ser #.

2 Region Id
  1. Double-click Region Id.

A P1 dialog box opens.

  1. Select the LOAD region in the Region Id dropdown menu.
  1. Click OK.
3 Region Location

Leave the default First Region Location value in the Region Location field.

4 Item Class
  1. Double-click Item Class.

A P3 dialog box opens.

  1. Select the BLOCK class in the Item Class dropdown menu.
  1. Click OK.
5 Attribute ID
  1. Double-click Attribute Id.

A P4 dialog box opens.

  1. Select the CPU Serial  # class in the Attribute Id dropdown menu.
  1. Click OK.
6 Point Name
  1. Double-click Point Name.

A P5 dialog box opens.

  1. Click the Popup Menu button to the right of the Point Name field; select Browse on the Popup menu.

A Select a Point browser opens.

  1. Select CPUSERIAL.

Note: CPUSERIAL is the point that you created for the attrentry.cim screen

  1. Click OK.
7 OK Button

Click OK on the Set Attribute with Point dialog box.

The Output Logic Wizard now has Set CPU Ser # in the Function Blocks list box.