8.7. Implement the RCO Move Block/Carrier Configuration
About this task
A | Move a Block/Carrier from the LOAD to the ROBOT_CONV Region |
B | Confirm that the Move Succeeded |
- Move a Block/Carrier from the LOAD to the ROBOT_CONV Region
Procedure
- Open CIMPTRACK CimView screen and PRT_UI window.
-
Make sure that a block and carrier are in the LOAD region.
Note: Check the block's item ID in PRT_UI.
Since the previous block/carrier did not move they will still be in the LOAD region unless you moved them manually.
- Click Add Parts to open the Add Block Attributes screen..
- Enter (or re-enter) the block model number.
- Click the buttons to display YES..
-
Click OK.
Results
The attribute values should be YES; the block and carrier should move to the ROBOT_CONV region.
- Confirm that the Move Succeeded
You will see that your CimEdit/RCO configuration has caused changes in all of the following applications.
- CimView Screen LOAD Region
- PRT_UI LOAD Region
- PRT_UI ROBOT_CONV Region
- Block Attributes
- RCOUI AUTO COMPLETE
CimView Screen LOAD Region
On the CIMPTRACK CimView screen, the
- LOAD region displays 0
- ROBOT_CONV displays at least 1.
![](../common/../images/VCimViewLOADRegion0.png)
PRT_UI LOAD Region
The PRT_UI LOAD region should be empty.
![](../common/../images/VPRT_UILOADEmpty.png)
PRT_UI ROBOT_CONV Region
The ROBOT_CONV region should list the block/carrier that were in the LOAD region.
![](../common/../images/VPRT_UIROBOT_CONVwithBlockCarrier.png)
Block Attributes
The Block's attributes that were listed on the attrentry screen should be True.
![](../common/../images/VDialogModifyItemBlockinLOAD2AttributesSettoTrue.png)
RCOUI AUTO COMPLETE
This is the first time you will open the RCOUI for this tutorial. Because you created an RCO, the RCOUI should report that activity.
- Double-click Production Tracking>Routing Control Objects UI in the Workbench left-pane.
-
The
AddParts
decision should be COMPLETE in the RCOUI.
![](../common/../images/VRCOUIMoveAutoComplete.png)