cnc_eupload.exe

Purpose

Upload a single part program or a sequence of part programs from CNC memory to a single file on the PC.

Correct Usage

C:\> cnc_eupload <ipaddr> <portnum> <pathnum> <filespec> <startprogram> <endprogram>


`<ipaddr>`	IP address of the CNC.
`<portnum>`	Port number of the CNC.
`<pathnum>`	CNC path. Enter one of the following.
	Value	Path
	0	None
	1	First
	2	Second
	3	Third
	4	Fourth	Series 30i/31i/32i only
	5	Fifth	Series 30i/31i/32i only
	6	Sixth	Series 30i/31i/32ionly
	7	Seventh	Series 30i/31i/32i only
	8	Eighth	Series 30i/31i/32i only
	9	Ninth	Series 30i/31i/32i only
	10	Tenth	Series 30i/31i/32i only
	If the CNC does not support multiple paths, enter 0.
`<filespec>`	File specification of file to receive the uploaded part program(s). This may be a fully qualified filename or a filename in the current directory.
`<startprogram>`	Starting range of part programs to upload.
`<endprogram>`	Ending range of part programs to upload.

The contents of CNC part programs between <startprogram> and <endprogram> are uploaded to the <filespec> for <ipaddr>, <portnum> and <pathnum>:

C:\> cnc_eupload 3.26.7.150 8172 0 test.pp 1 10
Uploading part programs O0001 ??? O0010 to test.pp: Success
C:\>

The file test.pp is either created or overwritten with all the part programs in the range of 1 to 10 currently registered in CNC memory.

Following is a list of possible errors.