cnc_edir.exe
Purpose
Display a directory of registered part programs in CNC memory.
Correct usage
C:\> cnc_edir <ipaddr> <portnum> <pathnum> [/w]
Usage defined
|
IP address of the CNC. | ||
|
Port number of the CNC. | ||
|
CNC path. Enter one of the following. | ||
Value | Path | ||
0 | None | ||
1 | First | ||
2 | Second | ||
3 | Third | ||
4 | Fourth | Series 30i/31i/32i only | |
5 | Fifth | Series 30i/31i/32i only | |
6 | Sixth | Series 30i/31i/32i only | |
7 | Seventh | Series 30i/31i/32i only | |
8 | Eighth | Series 30i/31i/32i only | |
9 | Ninth | Series 30i/31i/32i only | |
10 | Tenth | Series 30i/31i/32i only | |
If the CNC does not support multiple paths, enter 0. | |||
|
Optional request for a wide directory listing. |
Example
A directory of part programs registered in CNC memory is displayed, along with comments and sizes:
C:\> cnc_edir 3.26.7.150 8172 0
Program Comment??????????????????Size
O0020 TEST PROGRAM 20??????????216
O0038 TEST PROGRAM 38??????????432
O0039 TEST PROGRAM 39??????????288
O0040 TEST PROGRAM 40??????????288
O0041 TEST PROGRAM 41??????????216
O0042 TEST PROGRAM 42??????????720
6 Total file(s).
C:\> cnc_edir 3.26.7.150 8172 0 /w
O0020??????O0038??????O0039??????O0040??????O0041????????O0042
6 Total file(s).
C:\>
Following is a list of possible errors:
- Bad directory info.
- CNC memory protected.