Part Program Parameters

The CNC Part Program Application provides you with an easy to use interface for managing your part programs. Before you begin to use the application, there are some configuration guidelines to consider to ensure that your PC and CNCs are optimized for using the application.

  • Part Program parameters on the CNC.
  • Download program parameters.
  • Upload Program parameters.

Part Program parameters on the CNC

Series Parameter
HSSB
  • 160/180/210, 160i/180i/210i, 30i/31i/32i
 3202#0,#4,#6 influenced by setting 3210,3211 influenced by setting
  • Power Mate i
 3202#0,#4,#6 influenced by setting
Ethernet
  • 160i/180i/210i, 30i/31i/32i
 3202#0,#4,#6 3204#3,#4 3210,3211
  • Power Mate i
 3202#0,#4,#6 3204#3,#4
CNC Mode Mode Search
HSSB
  • 150
  • EDIT
  • Other
 Foreground Background
  • 150i, 160/180/210, 160i/180i/210i, 30i/31i/32i, Power Mate i
  • EDIT, MEM
  • Other
 Foreground Background
Ethernet
The behavior of this function depends on the CNC mode. EDIT, MEM Other Foreground Background

Download program parameters

  • Downstart
  • Downstart3 (Ethernet only)

Downstart

Series Parameter
Series 150,150i 0020=16(EDIT mode) must be set 0022=16(except EDIT mode) must be set 0000#0 influenced by setting 2200#1,#3,#4 influenced by setting 0011#0,2201#0 influenced by setting 2210,2211,2212,2213 influenced by setting
Series 160i/180i/210i, 30i/31i/32i 0000#0 influenced by setting 3201#2,#5,#6 influenced by setting 3202#0,#4 influenced by setting 3210,3211 influenced by setting 3290#7 influenced by setting
Series 160i/180i-W, Power Mate i 0000#0 influenced by setting 3201#2,#5,#6 influenced by setting 3202#0,#4 influenced by setting 3290#7 influenced by setting
CNC Mode Mode
  • 150/150i
 It is possible to use in any CNC mode.(It is necessary to set the parameter according to the mode)
  • 160/180/210, 160i/180i/210i, 30i/31i/32i, Power Mate I
 (It is possible to use in other than MDI mode.)
  • Power Mate i
 This function can be used in any CNC mode. (It is necessary to set mode according to the target data.)

Up

Downstart3 (Ethernet only)

Series Parameter
Series 150i 0020=7(*) must be set 0022=7(*) must be set 0000#0 2200#1,#3,#4 0011#0,2201#0 2210,2211,2212,2213 8000#0
Program Use
  • NC Program
EDIT Node 0020
Not EDIT Mode 0022
  • All except NC
Background Editing 0020
Not Background Editing Cannot be used.
Series 160i/180i/210i, 30i/31i/32i 0000#0 3201#2,#5,#6 3202#0,#4 3204#3,#4 3210,3211,8900#0
Power Mate i 0000#0 3201#2,#5,#6 3202#0,#4 3204#3,#4 8900#0
CNC Mode
This function can be used in any CNC mode. (It is necessary to set mode according to the target data.)

Up

Upload program parameters

  • Upstart
  • Upstart3

Upstart

Series Parameter
  • 150i
 0021=16 (EDIT mode) must be set 0023=16 (except EDIT mode) must be set

Up

Upstart3

Series Parameter
Series 150i 0021=7(*) must be set 0023=7(*) must be set 0000#0 2200#1,#3,#4 0011#0,2201#0 2210,2211,2212,2213
Program Use
  • NC Program
EDIT Node 0021
Not EDIT Mode 0023
  • All except NC
Background Editing 0023
Not Background Editing 0021
Series 160i/180i/210i, 30i/31i/32i 0000#0 3201#2,#5,#6 3202#0,#4 3204#3,#4 3210,3211
Power Mate i 0000#0 3201#2,#5,#6 3202#0,#4 3204#3,#4

Up