cnc_delete.exe

Purpose

Delete one or more part programs from CNC memory.

Correct usage

C:\> cnc_delete <nodenum> <pathnum> <prognum1> [<prognum2>] [<prognum3>] &ldots;

Usage defined

<nodenum>
 Node number (configured HSSB card). 
<pathnum>
 CNC path. Enter one of the following.
Value Path
0 None
1 First
2 Second
3 Third
4 Fourth Series 30i/31i/32i only
5 Fifth Series 30i/31i/32i only
6 Sixth Series 30i/31i/32i only
7 Seventh Series 30i/31i/32i only
8 Eighth Series 30i/31i/32i only
9 Ninth Series 30i/31i/32i only
10 Tenth Series 30i/31i/32i only
If the CNC does not support multiple paths, enter 0. 
<prognum>
 Represents one or more part program numbers to delete.

Example

The contents of each part program are deleted from CNC memory. A success or failure status displays when each deletion completes:

C:\>cnc_delete 0 0 1 4 660 5000
Deleting part program O0001: Success
Deleting part program O0004: Success
Deleting part program O0660: Data error
Deleting part program O5000: Success
C:\>

The part programs O0001, O0004 and O5000 have been deleted from CNC memory. The part program O0660 did not exist on the CNC and was not processed.

The following is a list of possible errors:

  • Program does not exist on CNC.
  • CNC memory protected.