Add a Tool When Performing an Operation

About this task

Use this procedure to add a calibrated tool when performing an operation.

Procedure

  1. Access the operation to which you want add a calibrated tool.
  2. Select the Tools tab.
    The Tools page appears.
  3. On the Tools page, select .
    The Add Tools page appears and displays all tools available.
  4. On the Add Tools page do the following:
    Field Description
    TOOL NAME Displays a list of tools configured. Select the required calibrated tool from the list. When a tool is out for calibration, it is disabled and cannot be selected.
    PREFERENCE Allows to select a tool as a "preferred" tool. You can select only one tool and specify it as a tool of preference.
    AVAILABLE USAGE COUNT Displays the available usage count. When the tool exceeds the usage count or is out for calibration, then it is grayed out.
  5. Select Add.
    The system redirects you to the Tools page.
  6. To save the selected tool, select .
    The system displays the message: Recording of selected Tools initiated successfully.