Add a Tool to an Operation

Before you begin

  1. Start the work order.
  2. Start the operation.

About this task

Use this procedure to add calibrated tool while executing the operation.

Procedure

  1. In the Unit Operations page, select an operation.
    The workspace for the operation appears.
  2. Select the Tool tab.
    The Tool page appears.
  3. On the Tool page, select Add Tools.
    The Add Tools page appears.
  4. On the Add Tools page do the following:
    Field Description
    TOOL NAME Displays a list of tools configured. Select the required calibrated tool from the list. When a tool is out for calibration, it is disabled and cannot be selected.
    PREFERENCE Allows to select a tool as a "preferred" tool. You can select only one tool and specify it as a tool of preference.
    REMAINING USAGE COUNT Displays the remaining usage count. When the tool exceeds the usage count or if the tool is out for calibration, then it is grayed out and you cannot select the tool.
  5. Select Add.
    The selected tool is added and is displayed in the TOOLS column.
  6. Click Record Tool to save the tool that is selected.
    Note: The tool quantity is consumed when you complete an operation.
  7. Complete the operation.