Marquee Manager Marquee Type: Types Overview

The range of Options you are offered for each marquee is dependent on which manufacturer and model you chose. Each marquee type has list of configurable options.

Andon Bin Cell	Andon Char Cel	Clock	Color Block	Controller	Counter	Marquee	Sounder	Stack Light

Option	Definition	Marquee Type
Cell Height	The height, in model specific units (perhaps pixels), of each cell within an Andon type display.
Cell Width	The width, in model specific units (perhaps pixels) of each cell within an Andon type display.
Channel Info	Number of speaker channels.
Channel Volume	Speaker volume of specific speaker channel.
Cyclic Settings	Tune type commands that are available. Options are: On duration only. Continuous only. Full cyclic tunes with on, off, and iteration control.
Default Delay	Length of time to wait with an empty message queue before sending the default message.
Delivery Confirmation	Enable or disable confirmation that the message was delivered to the appropriate display. If delivery was unsuccessful, the logs will indicate that the delivery failed.
Insertion Order	Location for inserting new messages in the queue. Options are: LIFO: Last In First Out The last message received is displayed first in the queue.  FIFO: First in First Out Messages are displayed in the order they are received.
Justification/Alignment Support	Layout of the message on the marquee. Options on the Marquee are: Right-aligned Left-aligned Centered
Keep Alive Interval	Interval at which something (keep-alive) is sent to the board to avoid dropping the connection.
Maximum Duration	Maximum number of seconds to display the message. Default is calculated as 400 milliseconds per character for the length of the roll-up message. Note: Once the value is calculated, it will be increased to the min viewing duration if smaller, or limited to the max if larger.
Maximum Roll-ups	Maximum number of roll-up pages will be sent. Note: This is calculated after a message has been broken down into pages.
Minimum Duration	Minimum number of seconds to display the message. The Default is calculated as 400 milliseconds per character for the length of the roll-up message. Note: Once this value is calculated, it will be increased to the min viewing duration if smaller, or limited to the max if larger.
Number of Bins per Cell	Number of cell variables, or bins, available per cell.
Number of Columns	Number of columns on a particular cell board.
Number of Lines	Number of vertical lines on the marquee.
Number of Rows	Number of rows on a particular cell board.
Number of Slots	Number of messages in the queue that will be displayed.
Number of Tunes	Number of tunes available for a particular sounder.
Priority Threshold	Lowest or highest priority message that will be queued and sent to the marquee.
Roll-up Wrapping Length	Length a particular word must be in order to be split and hyphenated, rather than carried to the next line.
Scroll Mode	List of the available scroll modes for the target. The options include, enabled, disable, or roll-up.
Sign Height	Height, in model specific units (e.g. pixels), of the target.
Sign Width	Width, in model specific units (e.g. pixels), of the target.
Slot Throttling Rate	Minimum time between messages sends (not yet implemented).
Time Format	Marquee will display in 12 or 24 hours from the Time Display drop-down.
Tune Auto Clear	Amount of time to allow a tune to play before clearing automatically.  This will clear the tune from the sounders queue even if the clear for it has not yet been processed.