Display a directory of registered part programs in CNC memory.

Correct usage

C:\> cnc_dir <nodenum> <pathnum> [/w]

Usage defined

Node number (configured HSSB card).
CNC path. Enter one of the following.
Value Path
0 None
1 First
2 Second
3 Third
4 Fourth Series 30i/31i/32i only
5 Fifth Series 30i/31i/32i only
6 Sixth Series 30i/31i/32i only
7 Seventh Series 30i/31i/32i only
8 Eighth Series 30i/31i/32i only
9 Ninth Series 30i/31i/32i only
10 Tenth Series 30i/31i/32i only
If the CNC does not support multiple paths, enter 0.

Optional request for a wide directory listing.


A directory of part programs registered in CNC memory is displayed, along with comments and sizes:

C:\> cnc_dir 0 0
Program Comment        Size
O0020 TEST PROGRAM 20    216
O0038 TEST PROGRAM 38    432
O0039 TEST PROGRAM 39    288
O0040 TEST PROGRAM 40    288
O0041 TEST PROGRAM 41    216
O0042 TEST PROGRAM 42    720
6 Total file(s).
C:\> cnc_dir 0 0 /w
O0020   O0038   O0039   O0040   O0041   O0042
6 Total file(s).

Following is a list of possible errors:

  • Bad directory info.
  • CNC memory protected.