Delete one or more part programs from CNC memory.

Correct usage

C:\> cnc_delete <nodenum> <pathnum> <prognum1> [<prognum2>] [<prognum3>] &ldots;

Usage defined

Node number (configured HSSB card).
CNC path. Enter one of the following.
Value Path
0 None
1 First
2 Second
3 Third
4 Fourth Series 30i/31i/32i only
5 Fifth Series 30i/31i/32i only
6 Sixth Series 30i/31i/32i only
7 Seventh Series 30i/31i/32i only
8 Eighth Series 30i/31i/32i only
9 Ninth Series 30i/31i/32i only
10 Tenth Series 30i/31i/32i only
If the CNC does not support multiple paths, enter 0.
Represents one or more part program numbers to delete.


The contents of each part program are deleted from CNC memory. A success or failure status displays when each deletion completes:

C:\>cnc_delete 0 0 1 4 660 5000
Deleting part program O0001: Success
Deleting part program O0004: Success
Deleting part program O0660: Data error
Deleting part program O5000: Success

The part programs O0001, O0004 and O5000 have been deleted from CNC memory. The part program O0660 did not exist on the CNC and was not processed.

The following is a list of possible errors:

  • Program does not exist on CNC.
  • CNC memory protected.