About this task
A
|
Open a Move Item Function Block
|
B
|
Configure the Move Item Function Block
|
C
|
Add the LOADtoROBOTCONV to the AddParts List
|
-
Open a Move Item Function Block
Procedure
-
Select the AddParts decision in the TrackerCfg_UI left-pane.
-
Click Popup Menu button to the right of the Output Logic Module field.
-
Select Edit on the Popup menu.
The Output Logic Wizard for the AddParts logic module opens.
-
Click the New button on the AddParts Output Logic Wizard toolbar.
The Select a Function Block browser opens.
-
Expand the PRT folder.
-
Double-click Move Item.
The Move Item dialog box opens.
-
Configure the Move Item Function Block
-
Select the following.
|
Parameter |
Value |
Comment |
A
|
Source Region Id
|
LOAD
|
|
|
Source Region Location
|
First Region Location
|
Default:
|
B
|
Destination Region Id
|
ROBOT_CONV
|
|
|
Destination Region Location
|
Last Region Location
|
Default
|
|
Item Type
|
|
Leave blank so whatever type that is in the LOAD region will be moved.
|
|
Item Class
|
|
Leave blank so the ??Block and Carrier will be moved.
|
C
|
Insert
|
ADD
|
|
-
Click OK to close the Move Item dialog box.
-
Add the LOADtoROBOTCONV to the AddParts List
-
Check that the
LOADtoROBOTCONV
item is listed at the end of the Function Blocks list in the Output Logic Wizard.
-
Click OK to close the Output Logic Wizard.
Results
The OLM should now be able to move a block/carrier from the LOAD to the ROBOT_CONV regions.