3.3.3. Fetch a Block into the ROBOT_CONV Region
About this task
You can fetch an item into a region from a region as well as move it from a region into a region.
A | Open a Fetch Item Dialog Box |
B | Fetch CBLK234 |
C | Make sure CBLK234 was Fetched |
- Open a Fetch Item Dialog Box
Note: Make a note of the Item ID of a block in the LOAD region. For this exercise you will use CBLK234.
Do the following.
1 | Select ROBOT_CONV in the Region ID field. |
2 | Select File>Fetch on the PRT_UI window menu bar. Tip: You can also press Ctrl+T on the keyboard. |
The Fetch Item dialog box opens.
- Fetch CBLK234
Procedure
Results
The ROBOT_CONV region displays.
- Confirm that the CBLK234 was Fetched
The available Block/carrier should have changed in the ROBOT_CONV and LOAD regions.
- LOAD_CONV Region
- LOAD Region
ROBOT_CONV Region
Both the block and the carrier are now in the ROBOT_CONV region.
- CBLK234 is in the ROBOT_CONV region's Location 1.
- CCAR567 is in the ROBOT_CONV region's Location 1.
Note: The ROBOT_CONV region was configured to allow 2 items per location.
LOAD Region
The LOAD region is now empty.