4.4. Connections on Port 32000
About this task
Port 32000 is the port that CIMPLICITY communicates through.
(On the Server)
Procedure
- Open the Command window.
-
Type
netstat –a
at the command prompt. -
Note all connections on Port 32000.
You should see a:
- TCP connection to your Viewer on Port 32000 and Viewer’s IP address
- UDP connection on Port 32000 and
*:*
for the IP address.
If the result is different do the following.
If you do not see connections on Port 32000 or only on UDP port 32000
Make sure the
- Project is running on the server and the
- Viewer is running as a Viewer.
If you do not see connections on both UDP port 32000 and TCP port 32000
Try to un-install and reinstall the TCP/IP protocol. Consult Microsoft documentation.
(On the Viewer)
- Open the Command window.
-
Type
netstat –a
at the command prompt. -
Note all connections on Port 32000.
You should see a:
- TCP connection to your Server on Port 32000 and the Server’s IP address.
- UDP connection on Port 32000 and
*:*
for the IP address.
If the result is different do the following/
If you do not see connections or connections only on TCP
- Recheck the license registration on the Server and Viewer.
-
Try to un-install and reinstall the TCP/IP protocol on the Viewer. Consult your Microsoft documentation.
- Router listens on TCP ports 32000, 32256, 32512 and 32768 for incoming connections. Not configurable.
- Router listens on UDP port 32000 for project announcements. Not configurable.
- RtrPing uses TCP port 4000 by default. Configurable using REDUND_PROBE_PORT global parm. This is for server redundancy.
- Cabling redundancy uses ports 5000 - 6000. Configurable in CIMHOSTS.TXT file.