CIMPLICITY Cluster Configuration Tool for 64-Bit Machines
The Cluster Configuration Tool for 64-Bit Machines tool enables you to perform the CIMPLICITY configuration hat is available in the <CIMPLICITY Project Resource Name> Project Properties dialog box>CIMPLICITY tab for 32-bit machines on 64-bit machines/ operating systems.
The tool enables you to
- Specify the CIMPLICITY project that will be in the CIMPLICITY cluster.
- Access and work in the project through the CIMPLICITY Workbench.
Cluster64ServerConfig Tool: Location
Double-click ..\<CIMPLICITY installation>\extras\Cluster64ServerConfig.exe
A Cluster64ServerConfig dialog box opens.
Cluster64ServerConfig Tool: ??Configuration
The following information will provide the information so a CIMPLICITY project can be brought online as a cluster resource.
Step | Description |
---|---|
1 | Cluster Information |
2 | Parameters |
3 | Status |
1: Cluster Information
Cluster information includes the following.- Cluster Name: Name of the cluster server selected in the Cluster Failover Manager.
- Resource Name: CIMPLICITY Resource ID that was selected in the Cluster Failover Manager.
2: Parameters
The project can be selected and opened in the Parameters section.
- Project/Browse Button
- Workbench Button
Project/Browse Button
The CIMPLICITY project for which the cluster is created.
The project entry includes the ..\path\<project name>
Do either of the following.
Manual Entry:
Enter the project path and name in the Project field.
Browse Button:
- Click the Browse button to the right of the Project field. An Open dialog box opens.
- Select the connected drive (that was selected as a resource dependency). Note: You can access the drive only if you are working on the node that is controlling the resource.
- Select the project that should be used for the resource.
- Click Open.
Result: The project name and path will be entered in the Project field.
Workbench Button
Workbench off line
Stop the project the same way you do when it is not in a cluster. The project is taken off line. Configure the project while it is stopped (off line).Workbench online
Start the project the same way you do when it is not in a cluster.
3: Status
The Cluster64ServerConfig tool enables you to see immediately if the entries are valid by clicking the Set Parameter button and viewing the Status box.
Set Parameter Button
Click the Set Parameter button to save the CIMPLICITY project name (parameter) to the CIMPLICITY Project Resource.
Status Box
When the Set Parameter button is clicked, results display in the Status box.
SUCCESS
If all entries are valid the Status box ??displays SUCCESS and ??the Resource Parameter List.
You can confirm the CIMPLICITY project path is set as a cluster Resource in the Failover Cluster Manager.
When the resource is brought online, the cluster is configured.
ERROR
Errors can include any of the following.
- Any entries (Cluster Name, Resource Name or Project Path) are empty.
- Cluster name is invalid.
- Resource name is invalid.
- Project path is invalid.