Error Messages from Point Management Resident Process

Error codes that can be set directly by the Point Management Resident Process are:

Number Defined Constant Description
24551 PTMRP_INVAL_ALRM_FLD Invalid alarm field specified
24552 PTMRP_INVAL_SVC_REQ Invalid service request
24553 PTMRP_INVAL_MSG Invalid message received
24554 PTMRP_DUP_POINT_ID Duplicate point id
24555 PTMRP_INVAL_POINT_STATE Invalid point state
24556 PTMRP_INVAL_COMM_STATE Invalid communication state
24557 PTMRP_INVAL_DEVICE_ID Invalid device id
24558 PTMRP_LINK_DOWN Logical link down
24559 PTMRP_INVAL_MSG_TYPE Invalid message type
24560 PTMRP_NO_HEADER No header segment found in message
24561 PTMRP_INVAL_MSG_LEN Message length exceeds expected length
24562 PTMRP_INVAL_DEVICE_STATE Invalid device state
24563 PTMRP_INVAL_POINT_ID Invalid point id
24564 PTMRP_MSG_TOO_LARGE Message exceeds available buffer space
24565 PTMRP_LOST_AP_REQ Lost application request DMS pointer
24566 PTMRP_NULL_PTR Specified pointer has value NULL
24567 PTMRP_MUST_BE_DP Only a derived point process may update a point
24568 PTMRP_NOT_OWNER_DP Not the owner derived point process for specified point
24569 PTMRP_NO_WARNING No warning limit configured for point
24570 PTMRP_NO_WARNING_LOW No Alarm Lo-1 limit configured for point
24571 PTMRP_NO_WARNING_HIGH No Alarm Hi-1 limit configured for point
24572 PTMRP_NO_ALARM No alarm limit configured for point
24573 PTMRP_NO_ALARM_LOW No Alarm Lo-2 limit configured for point
24574 PTMRP_NO_ALARM_HIGH No Alarm Hi-2 limit configured for point
24575 PTMRP_MUST_BE_DEVP Only a device point may be set
24576 PTMRP_NO_LIMITS_AVAIL No ALARM/WARNING limits available for the point
24577 PTMRP_POINT_IN_REQ_STATE Point is already in the requested ALARM/WARNING state
24578 PTMRP_NO_ALARM_CONF Point is not configured with a valid alarm
24579 PTMRP_NO_RANGE_LOW No range low limit configured for point
24580 PTMRP_NO_RANGE_HIGH No range high limit configured for point
24581 PTMRP_NO_DEADBAND No deadband configured for point
24582 PTMRP_NO_EU_CONV No EU conversion record found in SC EU conv file for point =
24583 PTMRP_ALARM_ID_NOT_IN_SC No alarm found in SC Alarm Def file for alarm id =
24584 PTMRP_FR_ID_NOT_IN_SC No fact. rsrc. ID found in SC FR file for FR id =
24585 PTMRP_ALARM_MGR_NOT_IN_SC No alarm mgr found in SC Alarm Mgr file for alarm mgr =
24586 PTMRP_PROC_ID_NOT_IN_SC PTM proc ID not found in SC Proc Id file for proc id =
24587 PTMRP_POINT_NOT_IN_SC No record found in SC point file for point =
24588 PTMRP_POINT_TYPE_NOT_IN_SC Point type not found in SC point type file for point =
24589 PTMRP_NO_WRT_ACCESS No write access for point
24590 PTMRP_POINT_DISABLED Cannot set a disabled point
24591 PTMRP_INIT_OUT_OF_RANGE Initial value is out of range for point =
24592 PTMRP_INVALID_ALARM_CRIT Invalid Alarm Criteria for point =
24593 PTMRP_NULL_DEVPT_SPEC Deviation point unspecified for point =
24594 PTMRP_INVALID_DEV_TYPE Invalid Deviation point type for point =
24595 PTMRP_INVALID_SAMPLE_INIT Invalid sample interval for point =
24596 PTMRP_INVALID_RATE_TYPE Invalid Rate of Change point type for point =
24597 PTMRP_INV_SAFPT_TYPE Safety point <%s> is invalid type for point <%s>
24598 PTMRP_INV_SAFPT_PT Safety point <%s> not allowed for Derived point <%s>
24599 PTMRP_INV_SAFPT Point <%s> cannot be its own Safety Point
24600 PTMRP_SAF_BAD_CONFIG Safety point <%s> not configured for point <%s>
24601 PTMRP_INV_DEVPT_TYPE Deviation point <%s> is invalid type for point <%s>
24602 PTMRP_DEV_BAD_CONFIG Deviation point <%s> not configured for point <%s>
24603 PTMRP_SAFPT_NOT_AVAIL Setpoint fail: <%s> - Safety point <%s> UNAVAILABLE
24604 PTMRP_SAFETY_FAIL Setpoint fail: <%s> - Safety point <%s> SET TO FALSE
24605 PTMRP_NO_ALARM_LIMITS No Alarm Limits specified for point =
24606 PTMRP_DEVPT_ABS_LIMIT Using Alarm Limit absolute value for Deviation point =
24607 PTMRP_NO_ARRAY_PT Array point not allowed for point =
24608 PTMRP_LOST_POINT_REQ Lost point request DMS pointer
24609 PTMRP_BAD_DC_SVC_REQ Unsupported DEVCOM service request
24610 PTMRP_NO_REDUND_SVC Host redundancy specified but single PTM service configured
24611 PTMRP_REDUND_CFG_ERR Host redundancy configuration error
24612 PTMRP_UNEXPECTED_TRANS Unexpected TRANSITION message received - ignored
24613 PTMRP_UNEXPECTED_MAST Unexpected server message received - ignored
24614 PTMRP_INVALID_MAST Invalid server message received - ignored
24615 PTMRP_PARTNER_NOT_FOUND Partner record not found in schema
24616 PTMRP_FORCED_ROLL_UP Received request for forced roll on partner recovery
24617 PTMRP_FORCED_ROLL_DN Received request for forced roll on partner failure
24618 PTMRP_LOGTRANS_FAILED failed to translate logical name for archive
24619 PTMRP_UNEXPECTED_PART_UP Partner recovery notice without previous partner failure
24610 PTMRP_NO_DL_ON_NODE No DL process on this node - no forced rollover
24621 PTMRP_NO_PTDL_ON_NODE No PTDL process on this node - no forced rollover
24622 PTMRP_SERVICE_NOT_OPEN Failed to open service file - no forced rollover
24623 PTMRP_NO_BUF_VALUES No buffered values for point =
24624 PTMRP_INVALID_BUF_VALUE Invalid maximum point buffering and duration for point =
24625 PTMRP_ADHOC_REQ
24626 PTMRP_ADHOC_CREATE Point By Address Created: %.50s
24627 PTMRP_ADHOC_DELETE Point by Address Deleted: %.50s
24628 PTMRP_TRIGGER_NOT_AVAIL Point %.16s availability trigger %.16s is unavailable.
24629 PTMRP_TRIGGER_FAIL Point %.16s availability trigger %.16s is not numeric.
24630 PTMRP_INV_TRIGGER_OWN Point %.32s cannot be its own availability trigger.
24631 PTMRP_INV_TRIGGER_TYPE Point %.16s availability trigger %.16s is not numeric.
24632 PTMRP_INV_TRIGGER_CFG Point %.16s availability trigger %.16s is not configured.
24633 PTMRP_INV_TRIGGER_STATE Point %.16s has an invalid availability trigger %.16s.
24634 PTMRP_CANNOT_HAVE_TRIGGER A derived point %.16s cannot have an availability trigger %.16s.
24635 PTMRP_POINT_ES_ID_MISMATCH Old/Invalid ES alias point ID -
24636 PTMRP_POINT_INV_ES_REQ Invalid ES alias point ID request from