3.2. Attach Additional .NET Assembly References

About this task

CIMPLICITY provides default .NET assembly references for C# and VB .NET; additional references can be added or removed in the (Event Editor) Setup dialog box.

Procedure

  1. Open the Project Propertiesdialog box.
  2. Do the following.
    A Select the Settings tab.
    B Select Event Editor.
    C Click Settings.

    A Setup dialog box opens.

  3. Do any of the following.
    A Add a .Net Assembly reference.
    1. Click the Open button to the right of the .Net Assembly References field.
    2. An Open dialog box opens.
    3. Select the .dll file that should be added to the list.
    4. Click Add.
    Result: The selected file is listed as one of the .Net Assembly references.
    B Remove a reference. Select the file to be removed; click Remove.
    C Modify the list. Click Modify. The .Net Assembly Reference field is cleared.
  4. Click the Open button to the right of the .Net Assembly References field.
  5. An Open dialog box opens.
  6. Select the .dll file that should be added to the list.
  7. Click Add.

Results

The selected file is listed as one of the .Net Assembly references.