SAMPLE_INTV

About this task

Point Type All
Maximum Field Length Integer
CIMPLICITY Field Name Alarm Delay Interval (value)
Description SAMPLE_INTV depends on the alarm type, as follows.
Rate of Change The frequency with which the point will be sampled for Rate of Change alarming.
Absolute The length of delay before the alarm is reported, if Delay Alarms is set to Y.
Note: CLIE import generates an error and fails for points where the SAMPLE_INTV field value is set to less than 5 and SAMPLE_INTV_UNIT is set to SEC.

This is the alarm delay time setting field, which was modified to accept a delay of less than 5 seconds. Error messages in the CLIE log files are as follows for each point that fails:

Procedure

  1. Error in Sample Interval for Point '<pointname>'
  2. Error deriving field data in SNF record for point '<pointname>'.