3. Array Tab in the PCP Point Properties Dialog Box

Procedure

  1. Double-click an element in the array.

    The element displays in a writable box.

  2. Change the element's value.
  3. Press Enter on the keyboard.

    The new value displays in the Set Value column. The Current  Value is different from the Set Value.

  4. Click  Apply.

    The Current Value is now the same as the Set Value.

  5. Click OK to close the PCP Point Properties dialog box.

Results

The Point Control Panel updates to reflect your changes.

Note: You can open the array's detailed Point Properties dialog box to make other modifications.