Step 2. Use the Field Chooser Dialog Box
- Enables you to select what fields will display in what order in the Workbench right-pane.
- Affects the Detail and Tree View.
- Field Chooser options
- Example: Workbench Right-Pane columns
Field Chooser Options
Field Chooser options are as follows.
Option | Action/Features | |||
1 | Available Field | Select a field. Note: Fields listed in the Available Field column do not display in the Workbench right-pane. The following button is available. |
||
Add | Moves the selected field to the Display Fields list. | |||
2 | Display Fields | Select a field. Note: Fields listed in the Display Fields column display in the Workbench right-pane. ExampleA list of Display Fields for points might be: The following buttons are available.
|
||
Move Up | Moves the field with each click:
Note: Disabled if the field:
|
|||
Move Down | Moves the field with each click:
Note: Disabled if the field:
|
|||
Remove | Moves the selected field back to the Available Field list Note: Disabled if the field is required. ExampleThe Point ID must display in the Workbench right-pane when Points is selected in the left-pane. |
|||
3 | OK/Cancel | OK | Closes the Field Chooser: saves the changes. | |
Cancel | Closes the Field Chooser; does not save the changes. |
Example: Workbench Right-Pane Columns
The Workbench right-pane displays the Points fields, from left to right, in the order they are listed in the Field Chooser dialog box.
1 | Point ID |
2 | Short ID |
3 | Resource |
4 | Device ID |
5 | Point Type |
6 | Description |