Read/Write Data Setup Utility Properties
After configuring the port parameters the communication can be tested with the Read/Write Data tab of the Setup Utility dialog box.
Node Address | Enter the same as the Source ID on the Port Settings tab. |
Address | Enter the address to be tested. |
Data Value | Enter data value in decimal to be written on the PLC. |
Read Data | Reads data from the address specified in the Address field and updates the Data Value field. |
Write Data | Writes the data from the Data Value field to the address in the Address field. |
OK / Cancel | Closes the application. |
Help | Provides the online help about the Setup utility. |