Port Setting Setup Utility Properties
Use the field on the Port Settings tab of the Setup Utility dialog box, to configure the serial port characteristics:
Source ID | Enter the station number of the DF-1 device. |
Port Number | Select the COM port attached to the device. |
Baud rate | Enter the baud rate for communications from the drop-down list. |
Parity | Select the parity to be used for communications. |
Data Bits | Select the number of data bits in the data from the list. |
Stop Bits | Number of stop bits. |
Error Type | Can be a Block Check character (BCC) type or Cyclic Redundancy Check (CRC) type. |
RTS Control | Default is Toggle. |
DTR Control | Default is Enable. |