Install Operations Hub, Historian and SCADA on a Single Machine

This topic describes the installation of Operations Hub, Historian, and SCADA (iFix, Cimplicity) on the same computer.

Ensure that the machine on which you want to install meets the installation requirements for these applications.
  • Operations Hub 2022
  • Historian 2022
  • iFix 2022
  • Cimplicity 2022 and Webspace 6.0
You can install the applications in any order, and in multiple combinations, on the same machine. The order of installation in the following steps is only an example to accomplish this task. You can use a shared Proficy Authentication (UAA) for installing multiple products on the same computer.
  1. Run the installation DVD for Historian, and install web-based clients:
    • Historian Server
    • Historian Collectors
    • Historian Web Based Client
    The installation creates an application shortcut for the components on your desktop. Proficy Authentication is also installed as part of the Historian installation.
  2. On the same machine, run the installation for SCADA (iFix or Cimplicity). Configure the following:
    1. Create and configure SCADA points.
    2. Configure Alarms.
    3. Configure and publish pictures/mimics to Operations Hub (after Operations Hub is installed).
  3. On the same machine, run the installation DVD for Operations Hub, and follow the wizard to install the application.
    Important points to consider:
    • The FQDN details cannot be modified if you install Operations Hub after installing Historian on the same machine. The host names provided during Historian installation are acquired by default.


    • Do not select Use External Proficy Authentication if installing Operations Hub after installing Historian on the same machine. Historian's UAA instance is already installed on your machine.


  4. After installing, log in to Operations Hub with your user credentials.
    If you open Historian Web Admin while logged into Operations Hub on the same machine, you may receive an error stating that access is denied due to insufficient privileges.
  5. In Operations Hub, go to Manage > Users, and access your user account.
  6. Add historian_visualization.admin and historian_visualization.user to Groups and save.
    Historian privileges are assigned to the user account.
  7. If you run into a Unable to load data sources error, refer to troubleshooting for resolving the issue.
If you installed Operations Hub followed by Historian on the same machine, then search for Operations Hub log files in the Historian's log folder. Both application log files are created in C:\ProgramData\HistorianWebBasedClientLogs.