Unregister CIMPLICITY Plug-in from Configuration Hub

If you do not need a CIMPLICITY plug-in in Configuration Hub for any reason, you can unregister the plug-in completely from Configuration Hub. Once you unregister the plug-in, that plug-in node is completely removed along with all the associated projects.

To unregister a CIMPLICITY plug-in, do the following:

  1. Open the project in CIMPLICITY Workbench as needed. For more information on Workbench, refer to the section About the CIMPLICITY Workbench..
  2. From the toolbar, click
    The CIMPLICITY Plug-in Registration page opens.
  3. In the CIMPLICITY Plug-in Registration page, enter the computer level username and password that you generated in CIMPLICITY using the RegisterComputerUser.exe tool that is available at [Install location]\Proficy\Proficy CIMPLICITY\exe.
  4. Click Login.
    The Configuration Hub Server Registration page opens.
  5. Enter the Configuration Hub Administration Credentials and Proficy Authentication Credentials.
    Note: Ensure to enter valid credentials for both Configuration Hub Administration and Proficy Authentication. Accidentally, if you provide invalid Proficy Authentication credentials and unregister, the plug-in will be unregistered and removed from Configuration Hub; however, the Proficy Authentication registration will still be active for the project.
  6. Click Unregister.
    The Unregister Plug-in window opens.
  7. To unregister, click Yes.
    The plug-in is unregistered successfully.

    To see the changes, you must log out of Configuration hub and log in again. If you need to register another plug-in, you can register a plug-in again. For more information, refer to section Register CIMPLICITY with Configuration Hub, and Proficy Authentication.