2.2. Select Projects and Users for the OPC Server

About this task

The OPC Server Configuration dialog box lists the projects with authorized users that are attached to the OPC Server.

Do any of the following to modify the list.

1 Add.
2 Remove.
3 Show/Hide name space.
4 Details.
5 Reconcile cache to project.
6 Minimum Scan Rate
7 OK / Cancel.
1 Add
Important: The OPC server will only accept points from a project if the project is listed in the configuration

Procedure

  1. Click Add.

    The Project Properties dialog opens.

  2. Enter the information in the fields as follows.
    Field Description
    Project name Project that will be added to the OPC Server configuration. Note: Names of running projects are available in the drop down list. You can add a project name that is not running. However, the project will not be available to the OPC Server until it is started.
    User name Authorized CIMPLICITY project login user name.
    Password A CIMPLICITY password that is valid for the specified user. The OPC server uses the password in conjunction with project user name to determine user authorization.
    Confirm password Verification check. The Password and Confirm password must be the same. If they are not the same, the project settings cannot be saved.
  3. Click one of the following.
    Button Result
    OK Save project settings and return to the OPC Server Configuration dialog box, if there are no errors.
    Cancel Cancel the settings and return to the OPC Server Configuration dialog box.
    Apply Apply the latest entries. The names will be added to the OPC Server list, if there are no errors. Continue adding names and passwords in the Project Properties dialog box.

    Result: All correctly added project names and user names will be listed in the OPC Server Configuration dialog box when the OPC Project Properties dialog box is closed.

    2 Remove
    Note: The Remove button is enabled only when no OPC Clients are attached to the instance of the OPC Server that is being configured.

    Any project can be disconnected from the OPC Server.

  4. Select a project in the list.
  5. Click Remove.

    Result: The selected project is removed from the list.

    3 Show/Hide name space

    The OPC Server can show or hide the points and data for any listed project..

    The Show the name space/Hide the name space button specifies the following.

    Button Label Description
    Show this name space When Show this name space is selected: The project's:
    • Name space can be browsed from an OPC Client.
    • Cache, e.g. points and data are cached.
    An OPC Client can successfully add items whether or not the project is running if the item is found in the cache.
    Note:
    In the Configuration Server dialog box:
    • Projects are listed in a bold font when the name space is shown.
    • The button label will display as Hide this name space when the project is selected in the OPC Server Configuration dialog box.
    Hide this name space Default When Hide this name space is selected. The project has:
    • A hidden name space.
    • No cache.
    Items cannot be added when the project is not running An OPC Client browse will not see items in the project.
    Note:
    In the Configuration Server dialog box:
    • Projects are listed in a normal font when the name space is hidden.
    • The button label will display as Show this name space when the project is selected in the OPC Server Configuration dialog box.
    4 Details

    The user name and/or password can be modified at any time for a selected project.

  6. Select a project in the list.
  7. Click Details.

    The project's Project Properties dialog box containing the selected project's user name and password opens.

  8. Make any necessary changes.
  9. Accept or cancel the changes when you close the dialog box.
    5 Reconcile cache to project

    Reconcile cache to project specifies if the OPC Server, on startup, should reconcile its cache with the project server .

    The options are as follows.

    Reconcile Description
    Check The OPC Server, on startup, will reconcile the cache for the project and up-date the cache with any changes that have been made in the project configuration. Reconciling the cache on startup:
    • Important for projects that change frequently, e.g. points are added or deleted.
    • Causes the OPC Server to take more time on startup, particularly for large projects.
    Note: When there is a change in the project or OPC Server configuration,
    • An instance of the OPC Server that started after the change will read the latest version of the .xml file on startup; its cache will be reconciled.
    • The cache for instances that are already running will contain the configuration data from when the obsolete .xml version was read.
    Those instances can be reconciled while running or stopped and re-started to update their cache with the latest .xml data.
    Clear The OPC Server will not reconcile the cache for the project. Not reconciling the cache on startup:
    • Is appropriate for projects that have stable configuration. If the configuration has not changed, differences will not be found so reconciling will not change anything in the cache.
    • Speeds up the OPC Server startup.
    Tip: If Reconcile cache to project is clear and the configuration for a project whose name space is in the OPC Server has changed, a reconcile can be forced as follows.
  10. Check Reconcile cache to project.
  11. Click the Show the name space button.

    The project will be listed in bold font. When the project is selected in the OPC Server Configuration dialog box, the button label will display as Hide the name space.

  12. Click OK.

    The OPC Server Configuration dialog box closes.

    The project data is hidden.

  13. Re-open the OPC Server Configuration dialog box.
  14. Click Hide the name space.
  15. Click OK.

    The OPC Server Configuration dialog box closes. The OPC Server cache is reconciled.

  16. To turn or reconciliation again:
    1. Open the OPC Server Configuration dialog box
    2. Clear Reconcile cache to project.
    6 Minimum Group Scan Rate

    You can set the OPC Minimum group scan rate in this fieeld. CIMPLICITY OPC Server will use this value as the default minium group scan rate in cases where OPC Clients connecting to this server has not specified any value for group scan rate. If an OPC client specifies a group scan rate then CIMPLICITY OPC Server ??will use the value specified by OPC Client. If an OPC client specifies an invalid ??group scan rate, or if its value is less or greater than the range between 2 to 10000 milliseconds, then the value provided to this configuration will be used as the group scan rate.

    7 OK / Cancel

    Click one of the following.

    Button Result
    OK The OPC Server Configuration dialog box closes. All changes made while the dialog box was open are made in the OPC Server. Note: CIMPLICITY Login dialog boxes for configured projects may open when the OPC Server Configuration dialog box closes.
    Cancel Cancel all changes and return to the OPC Server window.