You can adjust the timing and performance characteristics of the Toyopuc communications by changing or defining the global parameters listed below.
- <PRCNAM>_CONNECTION_TIMEOUT
- <PRCNAM>_READ_WRITE_TIMEOUT
- <PORT>_BIND_ADDR
<PRCNAM>_CONNECTION_TIMEOUT
For
|
Toyopuc
Project
|
Purpose
|
Specify how long the communications enable should wait for a connect operation to complete.
|
Value
|
Number of seconds
|
Recommended
|
5
|
|
Default Value
|
10
|
|
<PRCNAM>_READ_WRITE_TIMEOUT
For
|
Toyopuc
Project
|
Purpose
|
Specify how long the communications enable should wait for a ??read or write operation to complete
|
Comment
|
|
Value
|
Number of seconds
|
Recommended
|
3
|
|
Default Value
|
10
|
|
<PORT>_BIND_ADDR
For
|
Toyopuc
Project
|
Purpose
|
To assign the host name that corresponds to the Ethernet card to be used for Toyopuc communications.
|
Comment
|
When there are multiple Ethernet cards in the computer and the first connection configured for access by network services is not used, a host name needs to be configured for each card that will by used by a CIMPLICITY Toyopuc port.
For each CIMPLICITY Toyopuc port that is using an alternate connection, define a CIMPLICITY project parameter.
|
Value
|
Host name that corresponds to the Ethernet card to be used for Toyopuc communications.
|
Default Value
|
First card in the TCP/IP binding order is used.
|