CIMPLICITYSeries 90 TCP/IP Triplex Privpage
By default, the Triplex device communication enabler will connect to a PLC at the default privilege level configured for the PLC. Use the Priv Page tab in the Device Properties to change the default access.
| Access options for each PLC are | |
| None | Default level in the PLC |
| Level 1 | Typically read-only access |
| Level 2 | Read and Write data, Clear Fault Tables |
| Level 3 | Read and Write Data, Clear Fault Tables, ??Write Logic and Configuration with the CPU stopped |
| Level 4 | Change Passwords, Rad and Write Data, Clear Fault Tables, Write Logic and Configuration |
| Passwords | ||
| May only be specified for levels 2, 3 and 4. Must be entered exactly as on the PLC. Access is controlled on a per project basis. | ||
| PLC selections are | ||
| Primary PLC of the redundant group or the non-redundant PLC being configured | ||
| First PLC Access Level | Level of access to be requested by the communication interface when establishing a connection for the first device | |
| First Password | Password to be used in requesting the level of access for the first device | |
| Second PLC of the redundant group | ||
| Second PLC Access Level | Level of access to be requested by the communication interface when establishing a connection for the second device | |
| Second Password | Password to be used in requesting the level of access for the second device | |
| Third PLC of the redundant group | ||
| Third PLC Access Level | Level of access to be requested by the communication interface when establishing a connection for the third device | |
| Third PLC Password | Password to be used in requesting the level of access for the third device | |
Important: In dynamic mode, changes are effective the next time that the device communication interface needs to connect to the PLC.
