2. Enter Marquee Port Details

Use the Marquee Port details dialog box to set the page with and cycle time for messages. You can also select the types of messages to display.

Option	Description
Page width	Width to be used when calculating word wrapping for the devices on the port..
Cycle time	Maximum number of seconds to be spent displaying messages from the queue before the displaying of messages will re-start from the beginning of the queue
Log events	Checked		Log events to be processed.
Log alarms	Checked		Log alarms to be processed.
Config Port	Opens the Marquee Port <Port> Config dialog box, which provides options to configure the Marquee port. Options are:
	Baud rate		Selections are: 75 110 150 300 600 1200 2400 4800 9600 19200
	Parity		Selections are: none odd even mark space
	Data		Selections are: 4 Bits 8 Bits
	Stop bit		Selections are: One & Half Stop Bits One Stop Bit Two Stop Bits
All alarm classes	Checked		Display all alarm classes. Important: Create an alarm class for each Marquee port and use a different alarm class to filter alarm messages to each Marquee process. Serious performance problems could result from sending all alarms to all Marquee processes if it is a normal condition for there to be a large number of outstanding alarms in your CIMPLICITY project.
	Cleared		Display the alarms for a single alarm class.
Alarm class	Display the alarms for the selected alarm class.
		Opens the Select an Alarm Class browser
		Opens a Popup menu to create or select an alarm class.