A1SJ71E71-B2 Settings

For the A1SJ71E71-B2 module, the switches of interest are:


Switch	Setting	Description
SW1	OFF	Line is closed when TCP time-out occurs
	ON	Line is not closed when TCP time-out occurs
SW2	OFF	Use binary communications
	ON	Use ASCII communications
SW3	OFF	Writes to the programmable controller are disabled when CPU is in RUN state
	ON	Writes to the programmable controller are enabled when CPU is in RUN state
SW4	OFF	Start initial processing immediately when a message is received (quick start)
	ON	Start initial processing 20 seconds after delay time when a message is received (normal start)

Note: All switches are set to the OFF position in the factory.