Example 4.2.2. Enter Values for the Percentage Arrays

Procedure

  1. Stop the project; does a configuration update and re-starts the project.
  2. Open the Point Control Panel.
  3.  Add the configuration array points for the Eliminate Sources Based on Rule function block.
  4. For each point:
    1. Double-click the point to open its Point Control Panel Point Properties dialog box.
    2. Select the Array tab.
    1. Apply values to each array element as follows
    Parameter Description Point Array Values
    Value Element
    1 Attribute Name RAM 0 RAMATTNAME
    RAM 1
    RAM 2
    2 Attribute Value MEM128 0 RAMATTVALUE
    MEM256 1
    MEM512 3
    3 Upper Release % 30 0 RAMUPPERP
    40 1
    50 2
    4 Lower Release % 20 0 RAMLOWERP
    25 1
    40 2

Results

The initial values (Element 0) display in the Point Control Panel list.

The configuration for Eliminate Source Based on Percentages evaluation is almost ready for runtime. RSA will enter the count values during runtime.

Note: The weight that will be assigned to failures still needs to be entered in the Set Block Weights function block.

Attribute Name Attribute Value Upper Release % Lower Release % Attribute: Release Total Count
RAM MEM128 30 20 TBD TBD
RAM MEM256 40 25 TBD TBD
RAM MEM512 50 40 TBD TBD