CIMPLICITY Remote Access Server Setup
Procedure
-
Install the Remote Access Service (RAS) on the CIMPLICITY Server.
Consult Microsoft Windows documentation for details.
-
Install RAS on the CIMPLICITY Viewer (client).
Consult Microsoft Windows documentation for details.
-
Broadcast each project that should be listed by the CIMPLICITY Viewers.
- Open each project in the CIMPLICITY Workbench.
- Click Project>Properties on the Workbench menu bar.
The Project Properties dialog box opens.
- Select the Options tab.
- Check Enable project broadcast.
-
Configure the RAS Server to accept connections.
- Open the CIMPLICITY Options dialog box, as follows.
- Click Start on the Windows task bar.
- Select (All) Programs>Proficy - HMI SCADA - CIMPLICITY version>CIMPLICITY Options.
The CIMPLICITY Options dialog box opens.
- Select the Startup Options tab.
- Check Accept connections.
-
Identify the Server IP addresses, as follows.
- Select the Hosts tab in the CIMPLICITY Options dialog box.
- Enter the appropriate IP address On the Hosts tab in the CIMPLICITY Options dialog box.
If the RAS Server: Enter: Has one or more Network Interface Cards (NIC's). The IP address configured for each of the NIC's. Does not have a NIC 127.0.0.1