Running the FloPro/FloNet Communications Test Program
Procedure
- Open the project's Workbench.
- From the Tools menu, select Command Prompt....
-
In the Command Prompt window, type the following command:
flopro_diag [<address>]
Where < address > is an optional argument and is the IP address of the target PC. If you do not supply this argument, the IP address defaults to 3.26.5.159.
When you run flopro_diag and select a nonexistent IP address or an IP address for a computer where FloPro is not configured, the output will show domain sizes of zero.
When you run flopro_diag for a target computer where FloPro is working correctly, it produces output like the following:
Target is IP address 3.26.5.159 Test to run 1 times The Sockets DLL version is 1.1 Examining domain limits database... For FloPro server at IP addr 9f051a03, limit[ 0]=4095 Input limit[ 1]=4095 Input Force limit[ 2]=4095 Flag limit[ 3]=4095 Flag Force limit[ 4]=1023 Timer limit[ 5]=2047 Counter limit[ 6]=1023 Register limit[ 7]=4095 Output limit[ 8]=4095 Output Force limit[ 9]=2047 Number limit[10]=2047 Ascii