For
|
System
|
Purpose
|
To set the amount of time the device communication enabler waits before sending a control character, start of header, or start of a data block.
|
Value
|
0 ms
|
for any CCM to CCM direct wire connections
|
|
10 ms
|
for situations causing slow response times
|
|
500 ms
|
for radio transmissions
|
|
500 ms
|
with time outs disabled for testing.
|
Default Value
|
0 ms
|
|
Comments
|
- Pin 11 on the J1 port provides a keying signal for radio transmission. The keying signal allows the radio transmitter to warm up for the length of the turnaround delay before data begins flowing.
- When the 500 ms turnaround delay with timeouts disabled is selected, timeout error conditions are ignored.
|