CIMPLICITY Project Information
Enter the following information about the CIMPLICITY project that uses OMRON TCP/IP communications:
The IP address for the computer running the CIMPLICITY project: | |
The netmask setting for your Ethernet network. This determines the network "class". Also referred to as the subnet mask. | |
The SNA value defined via the global parameter file (if the default of zero is over ridden). | |
The SA1 value defined via the global parameter file. | |
Host name assigned to the target controller or the controller acting as a gateway if the target is on a subnetwork. | |
The DNA value entered for the target controller. This is the <subnetwork number>. | |
The DA1 value entered for the target controller. This is the <address>. | |
Complete entry for the address of the controller in the Address field of the Default properties page in the Device Configuration dialog box. |
Make sure you have printouts of the following files on hand:
- The operating system's services file.
Locate the service name used to get the UDP Port Number for binding the communication socket and the Service Name defined for project.
- The hosts file.
Locate the Host Names and IP addresses for the controllers with which you will be communicating.
- The glb_parms.idt file.
Locate any global parameters you defined for OMRON TCP/IP communications.