Ethernet Direct
This is used for PLCs, which support direct Ethernet communication such as PLC-5/40E. It is assumed that the RSLinx Driver AB_ETH-1 is configured to include these PLCs as LOCAL.
Control Address: | Use an MG file address (ex. MG30:0) |
Communication Command: | PLC-2 Unprotected Write |
PLC-5 Data Table Address: | Starting address in the PLC of unsolicited data |
Size In Elements: | Number of Elements of Data |
*Host / Internet IP address: | IP address of CIMPLICITY host |
Destination DT address: | PLC-2 data table address configured for CIMPLICITY point |
Port Number: | Channel to be used for communication (ex. 2A) |
You can also use the word CLIENT instead of specifying the IP address. In that case, you need to configure piunsol.ini file on the host computer.