Step 2. Connect to an Open Factory CNC
Procedure
Method 1
- Expand Project in the Workbench left pane.
- Double-click CNC Part Program.
Method 2
- Click Start on the Windows task bar.
- Select (All) Programs> HMI SCADA - CIMPLICITY version>CNC Part Program .
Method 6
- Click Start on the Windows task bar.
- Select Run.
The Run dialog box opens.
- Enter
cnc_program
in the Open field. - Press Enter.
Method 4
Click a button that has been configured for a CimView screen.
The entry in the Command field will be cnc_program
The CNC Part Program– Protocol Selection dialog box opens.
A CNC Part Program - Protocol Selection dialog box opens when you use any method.
Method 5
- Click Programs on the CNC Quikstart Main Menu.
- Select the protocol you are using.
- Click OK.
- Continue based on your selection.
- FOCAS/HSSB
- FOCAS/Ethernet
FOCAS/HSSB
A CNC Part Program – Node Selection dialog box opens.
- Select a node from the Available node list.
- Click OK.
FOCAS/Ethernet
A CNC Part Program – Network Selection dialog box opens.
A. Enter the following.
Field | Description |
---|---|
Host | Valid IP address for the host or select one from the available list. |
Port | Port number the address is hooked to. |
Timeout |
B. Click OK.