DB_STATUS_LOG_OFF
For | Database Logger Project | |
Purpose | To turn on or off the database logging messages in the Status Log. If this parameter is not defined or set to zero (0), the messages are logged. | |
Value | Enter for one or both of the following bits: | |
1 | Turns off Status Log messages that display when the logging data type has been superceded by a column type in the database table. For examples, messages would display if a UINT point type is changed to an UDINT point type after the table has been created. | |
2 | Turns off status log messages alerting a user that the Alarm Manager resident process cannot be found. For example, messages might appear on a Viewer where there is no Alarm Manager resident process. | |
Default Value | No entry |
Note: Remaining bits are reserved for future use.