- GE Will Provide Den Berk Délice with Three of Its Jenbacher J624 4.5-Megawatt Gas Engines and Greenhouse Balance of Plant
- Through Multiyear Service Agreement, GE Will Connect Den Berk’s Jenbacher Gas Engines to Its myPlant Asset Performance Management Solution
- GE’s Flexible Jenbacher Technology Serves as Bridge to Renewable Energy
JENBACH, AUSTRIA-June 11, 2018-With Belgium’s goal to transition to 100 percent renewables by 2050, there is a stronger focus on flexibility in the power market and an increased need for small distributed power plants. Helping to meet this need, GE’s Distributed Power (NYSE: GE) business today announced that it will provide three of its Jenbacher* gas engines and greenhouse balance of plant to Den Berk Délice’s greenhouses in Belgium. Through a multiyear service agreement, the gas engines also will be connected to GE’s myPlant* Asset Performance Management (APM) platform.
“For more than a decade, we have been relying on GE’s Jenbacher gas engine solutions and services to power our multiple greenhouses. Our longstanding relationship with GE continues to grow, and we rely on its proven technology and deep domain expertise. GE’s gas engines provide a bridge to renewable energy and are helping us do our part to help meet Belgium’s renewable energy goals,” said Luc Beirinckx, owner, Den Berk Délice. “The flexibility of GE’s Jenbacher technology allows it to be activated during periods of low renewable power supply or tariff spikes, while conversely being able to be curtailed quickly during periods of high feed-ins of renewable energy or low energy prices.”
GE will provide a total of three of its Jenbacher J624, 4.5-megawatt (MW) gas engines, connected to the myPlant APM platform. One of the units was installed at Den Berk in Merksplas in November 2017, one will be installed at Den Horst in Merksplas in August, and one will be installed at Luc Beirinckx BVBA in Herentals in September. Currently, GE has an installed base of 27 MW at Den Berk’s greenhouses, and this project will add an additional 13.5 MW of power. GE’s high-efficiency cogeneration Jenbacher gas engines will use natural gas to provide heat and power to Den Berk’s greenhouse complex and carbon dioxide (CO2) to fertilize the tomatoes plants. The result of continuous enhancements and extensive experience, GE’s Jenbacher Type 6 gas engines have a 1,500-rpm engine speed, which results in a high power density with low installation costs, and its pre-combustion chamber achieves high efficiency with low emissions.
“GE’s Jenbacher Type 6 gas engines offer fuel utilization levels of around 100 percent including the condensation heat of the exhaust gases, which provides Den Berk with a time-independent and high-quality supply of CO2 for fertilization of the tomato plants as well as heat and power for the greenhouse and to the grid,” said Norbert Hetebrüg, regional sales director covering Western Europe including Germany and Central Eastern Europe for GE’s Distributed Power business. “In addition, Den Berk’s Jenbacher gas engines-and about 1,250 other Jenbacher gas engines installed in greenhouse applications around the globe-are monitored around the clock at GE’s Greenhouse Center of Excellence in the Netherlands. Many of them are using our myPlant APM solution for gas engines where engineers collect data that helps them calculate each plant’s operational state and foretell potential service events.”
GE’s myPlant APM solution for gas engines is a digital internet solution aimed at improving uptime and efficiency, reducing life cycle costs and driving operating performance and profitability. It provides a set of tools for advanced data management, predictive analytics, troubleshooting and remote control to reduce maintenance costs of customers’ power plants. The myPlant APM platform uses secure, centralized cloud storage to collect the data from customers’ Jenbacher gas engines, drive equipment and balance of plant by regularly transmitting sensor data streams, control alarms and operational data. Depending on the myPlant package and access level, customers and service providers are provided with several capabilities from basic visibility to their fleets to advanced monitoring and analytics-enabled diagnostic capabilities.
GE’s Jenbacher gas engines provide a powerful solution for greenhouses by using natural gas to not only provide electricity for on-site power or to the public grid, but also for heat and CO2 to fertilize the plants and meet the requirements of an efficient greenhouse. By increasing the intensity of the artificial lighting that is found in some greenhouses, plants absorb even more CO2. The cogeneration process also produces an incredible amount of heat, which non-greenhouses use to keep their buildings warm or incorporate into parts of their operations.
“One of the main advantages of GE’s Jenbacher units is that they produce nearly 1.8 kilograms of CO2 per cubic meter of natural gas during the process. With CO2 being a major ingredient in plant production, greenhouses can pump it into their buildings and boost crop efficiency by as much as 140 percent. Therefore, by using our Jenbacher gas engine technology, growers can boost crops, store heat, sell surplus energy and run these flexible engines at all times,” added Hetebrüg.
The two Jenbacher J624 gas engines at Berk Délice (Den Berk) of Merksplas, Antwerpen, are an important milestone in the more than 10 years of collaboration between the company and GE. Ten climate-friendly Jenbacher gas engines are already in operation at the company’s greenhouse.
* Indicates a trademark of the General Electric Company.
About Den Berk Délice
With a total surface area of 44 hectares of tomato cultivation, Den Berk Délice markets and innovates delicious quality tomatoes throughout the year. Den Berk is the most reliable, full-service specialist dedicated to growing, marketing and innovating delicious, top-quality tomatoes. Driven by enormous passion, the company grows scrumptious top-class tomatoes and develops great concepts. As a dependable partner, Den Berk’s ambition is to let its customers enjoy tomatoes 365 days a year.
About GE’s Distributed Power business
GE’s Distributed Power business is a leading provider of engines, power equipment and services focused on power generation and gas compression at or near the point of use. Distributed Power offers a diverse product portfolio that includes highly efficient, fuel-flexible, industrial gas engines generating 200 kW to 10 MW of power for numerous industries globally. In addition, the business provides life cycle support for more than 48,000 gas engines worldwide to help you meet your business challenges and success metrics-anywhere and anytime. Backed by our service providers in more than 100 countries, GE‘s global service network connects with you locally for rapid response to your service needs. GE’s Distributed Power business is headquartered in Jenbach, Austria.
About GE Power
GE Power is a leading company worldwide in the energy sector, offering technologies and services and thus covering the entire value chain from power generation to consumption. As a global digital industrial company, we pool resources and capacities to transform the energy industry fundamentally. Together with our customers in over 150 countries, we meet more than one third of the global electricity demand, power cities, build infrastructures and network the world with digital solutions.
GE (NYSE: GE) is the world’s digital industrial company and changes the industry with connected, responsive and predictive software-controlled machines and solutions. GE is organized around a global knowledge sharing system, “GE Store”, which allows all business units to access the same technologies, markets, structures and intellectual property and share them with one another. Every invention promotes other innovations and applications across multiple business units. With people, services, technology and scale, GE offers customers better results, as we speak the language of the industry. www.ge.com