V5.1.2.0.0
360-View
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance usability, you can now select 360 View as your Home page. | US617522 |
| To enhance usability, in the 360 Views page, you can set a value for Rows per page, and this configuration is saved as a user preference in the database. | US518585 |
To enhance usability, the Associated Page links configured for the currently selected asset are now displayed in the More Options menu ( ). | DE206804 |
| Description | Tracking ID |
|---|---|
| Previously, the query Public\Meridium\Modules\Core\Queries\Asset 360 Roles Query did not contain a column alias. This issue has been resolved. Note: If you previously modified this query, the 360 View Application Settings page may fail to display because of the missing column alias. In this case, copy the updated version of the query from the baseline catalog folder to the public folder, and re-apply the modification. | DE210921 |
| Previously, in the Groups view, if you selected an asset group that used more than one relationship type, some of the applicable 360 Views were not listed in the selection list. This issue has been resolved. | DE206981 |
Action Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, different number of recommendations were observed when viewing from Asset Health Manager and Action Management. This issue has been resolved. Now, the same recommendations numbers are seen. | DE209067 |
APM Connect
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
To improve efficiency and performance, the APM Connect solution has undergone a technology replacement; replacing Talend with Boomi as the integration tool. The new offering enhances the integration capabilities of APM Connect. The following versions are impacted:
Note: APM Connect Base 1.X and all versions of APM with APM Connect Base 2.X, except APM version 4.5, are End-of-Life (EOL) on or before December 31, 2023. This change does not affect other areas of the APM product offering. The deadline to complete the Technology Replacement is December 13, 2024. | US621522 |
| Description | Tracking ID |
|---|---|
| Previously, the APM Family Data Loader failed to load records when the data loader template was generated using third party libraries and a field contained a double quote character. This issue has been resolved. | DE209720 |
Asset Criticality Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, in the ACA Overview page, if you changed the filter settings, the graphs in the page loaded twice - the first time with the old data and the second time with the correct data. This issue has been resolved. Now, the graphs load only once, showing the correct data based on the filter settings. | DE209907 |
| Previously, if the Criticality Assessment for a given asset was equal to zero, then the System Criticality value was not getting updated. This issue has been resolved. | DE208641 |
Asset Health Manager
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you selected the filter option in the Health Indicator Source Management window, the filter options were not appearing. This issue has been resolved. | DE212072 |
| Previously, when you attempted to access the Health Summary page for a few Assets, sometimes, a timeout error occurred. This issue has been resolved. To facilitate this fix, the performance has been improved. | DE211959 |
| Previously, when you viewed the limit definitions on the Health Summary pages, the limits were not appearing correctly for user cultures where comma was used as a decimal separator. This issue has been resolved. | DE183601 |
Asset Strategy Implementation
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
To improve efficiency and to support creating and updating records in bulk, the Asset Strategy Implementation (ASI) Data Loader has been introduced. The Data Loader uses the baseline ASI data model to create records and link them to one another. Using the Data Loader, you can perform the following tasks:
In addition, you can specify the records that you want to export. To facilitate this enhancement, a new box Lookup Fields For Data loader and Export has been added in the ASI Admin options. | F70849 |
| To enhance usability, you can now export Implementation Packages, Maintenance Plans, and MIs in bulk using the new Export ASI Package feature. You can also export any custom WMI families. You can then use the exported package as a template to the Asset Strategy Implementation (ASI) Data Loader. In addition, you can configure the following settings:
| F70849 |
Asset Strategy Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
To support the accurate import of interval values for Strategy Maintenance Plans from SAP, the following enhancements have been implemented:
| F60164 |
| In the Implement Actions window, if you have implemented an Action as an RBI Recommendation in an Inspection Plan, the Inspection Task ID with a hyperlink to open the task related to the Action is displayed. A message appears indicating that the Action has been implemented in RBI via an Inspection Plan and you will not be able to unlink or implement the Action in the Asset Strategy Management module. | US614213 |
| Action field mappings for Inspection, Calibration, and Proof Test Tasks have been converted from business rules to Policies providing ease of configuration for both on-premises and cloud deployments. |
|
| You can now hide Asset Strategy Optimization (ASO) from APM. To facilitate this enhancement, a checkbox Enable ASO has been added to the ASM Preferences section in the ASM Admin page. | US608568 |
| Description | Tracking ID |
|---|---|
| Previously, in the Implement Actions section, if your APM license did not include all modules, blank options appeared in the Implement menu. This issue has been resolved. | DE213297 |
Previously, the following issues existed:
| DE211384 |
| Previously, for RBI Application setting, the Implement Button was enabled while selecting RBI Preferences for a Task in the Implement Action section of Asset Strategy Management. This issue has been resolved. The Implement Button in now disabled. | DE210403 |
| Previously, in the ASM Overview page, the result grid filter settings were not retained when switching pages. This issue has been resolved. | DE209630 |
| Previously, when you attempted to implement action as a Rounds Pro step using the Create New From Template option, you could not search and filter the templates. This issue has been resolved. | DE209012 |
| Previously, when you exported an Asset Strategy, the decimal values were not formatted based on your culture setting. This issue has been resolved. | DE208411 |
| Previously, when you attempted to unlink implemented Strategy under Asset Strategy Management, an error occurred. This issue has been resolved. Now, you can unlink an implemented Strategy. | DE207652 |
| Previously, in an AHM workflow in Asset Strategy, incorrect or duplicate general recommendation IDs were getting generated. This issue has been resolved. The recommendation IDs are now generated in sequence. | DE207648 |
Calibration Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, there was no option to view field history when you opened any datasheet in Calibration Management. This issue has been resolved. | US607065 |
| Previously, when you performed an automated calibration with 2 UP or 2 DOWN calibration strategies using Fluke 754 calibrator, the values that you entered were ignored and were not received by APM. This issue has been resolved. | DE210825 |
Compliance Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you accessed the NR13 Full Inspection Report or NR13 General Inspection Report, you were unable to view the images that were added as reference images. This issue has been resolved. | DE213874 |
| Previously, when using the European Inspection Management workflow, if you attempted to implement an Inspection Task from Compliance Recommendation, within a Posgres database, an error occurred. This issue has been resolved. | DE213742 |
Datasets
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, in the Datasets user interface, the styling of Create New Dataset button and Save button had usability issues. This issue has been resolved. Now, a tooltip text appears for the Create New and Save buttons in the Datasets user interface. | DE199490 |
Documentation
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, a few web links were broken in the Getting Started user documentation. This issue has been resolved. | DE213628 |
Failure Modes and Effects Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, in the Analysis section, when you accessed the Risk Matrix of a Failure Effect, and updated the Unmitigated Risk value of Probability for Financial category, then the Mitigated Risk value of Probability for Financial category was also updated. This issue has been resolved. | DE213244 |
| Previously, if you had configured Risk Card in Asset Strategy Management to display the Driving Unmitigated Risk Category field, an error appeared when you attempted to open either an Asset Strategy or an Asset Strategy Template. This issue has been resolved. | DE212112 |
| Previously, if the initial state of an FMEA/RCM Recommendation was modified, and you attempted to consolidate those Recommendations, an error occurred. This issue has been resolved. | DE211137 |
| Previously, after creating an FMEA Analysis, if you made additional changes in the same page, the page was unresponsive. However, if you refreshed the page, your changes were saved. This issue has been resolved. | DE210388 |
| Previously, when you uploaded the FMEA Asset Template through the Data Loader, the Asset Description field was not updated. This issue has been resolved. | DE209366 |
| Previously, when you uploaded data using the Failure Modes and Effects Analysis (FMEA) Data Loaders, the asset details were not updated for the FMEA Analysis Template. This issue has been resolved. | DE209066 |
Family Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you set the field behaviour to Disabled, based on the security group assigned to the user, the field was not disabled. This issue has been resolved. | DE211769 |
| Previously, when you tried to build Picklist behaviour using querylist and prompts, the same field could be used as input to the query, which could potentially cause an error. This issue has been resolved. Now, you cannot select the same field as prompt, as input to the query. | DE208500 |
| Previously, in the Manage ID Template window, you could not drag and drop the template ID fields and rearrange them. This issue has been resolved | DE193226 |
Family Policies
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance user experience, you can now export the summary of execution results of a Policy Instance in a Microsoft Excel spreadsheet. You can also filter summary of execution results and download the filtered result. | F74835 |
| When triggering an email using the Email Contact node, you can specify whether to include a message to state that all time values are shown in the UTC format. To facilitate this enhancement, a new check box named Include Time Zone message in email body has been added to the Email Contact node. | US616320 |
| During policy validation, in the To Address field in an Email Contact node, the syntax of the email address that you enter is now validated. If the syntax is incorrect, an error message appears. | US615877 |
| To enhance usability, node icons for Query Entity, Python node, and State Transition have been refreshed. | US596295 |
| Description | Tracking ID |
|---|---|
| Previously, if an extra space was added before or after an Email ID, the Policy execution failed and the Email Contact node displayed an error indicating that the specified string was not in the form required for an e-mail address. This issue has been resolved. | DE211154 |
| Previously, the Email Contact node failed when Policy information was unable to fit in the Reference Document description field. This issue has been resolved. Now, Policy information is stored in the Long Description field of the Reference document. | DE210795 |
| Previously, the schedule for background cleanup job was enhanced to provide additional options to control the job start time, end time, and selection of time zone. However, because of this change, the job start time was inconsistent. This issue has been resolved. | DE210437 |
Previously, if the entity key did not match with an available Policy, the Policy Trigger service displayed the NotExistException error and the job appeared in the Failed section of the Job Monitoring Dashboard. This issue has been resolved. | DE210056 |
| Previously, the Delete Relationship and Create Relationship node check did not happen if an existing relationship was already available for the given entity records. This issue has been resolved. | DE209749 |
| Previously, even if you removed the JSON Parser node from the Design workspace, a message appeared, stating that you must add at least one JSON path expression, and you could not save your changes to the family policy. These issues have been resolved. | DE207252 |
Foundation
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
To enhance usability, you can now:
| US617522 |
To improve product security, now, when the Your session has expired window is displayed, the current APM page content is hidden. Further, you can no longer cancel the dialog to return to APM; you may only proceed directly to the login page. | US607469 |
| Description | Tracking ID |
|---|---|
| Previously, in the Asset Finder dialog, if the asset selection was restricted to the site of a linked record or analysis, you could not select an asset assigned to the Global Site. This issue has been resolved. | DE212046 |
Previously, when you selected a link containing a query parameter, and this caused the dialog box with the message Sorry, 8 Tab Limit Reached to be displayed, the page was refreshed. This may have caused the page to display unexpected data. This issue has been resolved. | DE210756 |
| Previously, when you refreshed a page containing a data grid, the grid was displayed using the default settings. This issue has been resolved. Now, when you refresh that page, the data grid is displayed using the stored user preferences. | DE206049 |
General Dashboards
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you exported a Dashboard as a PDF, if the screen width of your device was greater than 1024 px, the image of the Dashboard was incorrectly proportioned. This issue has been resolved. | DE157291 |
Graphs
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you exported a Graph as a PDF, if the screen width of your device was greater than 1024 px, the image of the Graph was incorrectly proportioned. This issue has been resolved. | DE157291 |
Hazards Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance usability, Hazards Analysis has been moved from INTEGRITY to a new section named SAFETY in the module navigation menu. | US607110 |
| Description | Tracking ID |
|---|---|
Previously, when you deleted a Hazards Analysis, the following records were not deleted:
| DE208880 |
| Previously, when you attempted to promote a recommendation to ASM, an incorrect error message appeared if the recommendations were linked to different assets from the same Hazards Analysis Cause. This issue has been resolved. | DE205596 |
Import and Export
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to schedule export for a file with filename containing a white space, then the download failed. This issue has been resolved. Now, the white space in the file name is replaced by a underscore. | DE194663 |
Inspection Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, in the Inspection Overview section of Inspection Details, a blank space appeared above the Checklist Finding datasheet. This issue has been resolved. | F74195 |
| Previously, when you attempted to create a New Technical Asset Data datasheet for an asset, the datasheet header did not stay fixed at the top when you scrolled down the page. This issue has been resolved. | US614253 |
| Previously, in the Inspection Details page, when editing a General Finding or a Sub-Inspection, if the datasheet contained a date field, you could not select the date using the calendar. This issue has been resolved. | DE212472 |
| Previously, when you moved an inspection from Approved to Rework state, an error occurred. The issue appeared only for the inspections that were already approved in APM V4 and upgraded to state management in APM V5. This issue has been resolved. | DE211939 |
Previously, when you opened an existing Recommendation record in the Recommendations panel, you could modify field values without first selecting the  button. When you closed the datasheet, you could inadvertently save the modifications when the Unsaved Changes dialog was displayed. This issue has been resolved | DE210336 |
| Description | Tracking ID |
|---|---|
The new BDF architecture does not support the ability to load content using catalog queries. Therefore, the following queries are now marked obsolete:
"#im/reviewandapproveinspection?querypath=" +<inspection query path> | DE210524 |
Integrity Mobile Application
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now access and modify Inspection Health Evaluation records for checklist events in the Inspection Sheet section. When you modify an Inspection Health Evaluation for a given checklist category, the corresponding icon is updated in the checklist category header. | US613040 |
| Integrity Mobile App now supports application servers configured via the application proxy of Azure. When entering the server URL, you will be automatically redirected to the SSO Login page where you can enter credentials for authentication. After authentication, you will be prompted to select a datasource, and then you can access the application. | US616655 |
| To enhance usability, now, when you attempt to access the Integrity Mobile App, and if an error occurs on the Server Settings or the Login page, a new button, Info Log, appears that provides you with the detailed log information that you can use to view the error logs. | US614220 |
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to log in to the Integrity Mobile app, unprocessed requests for client certification-based authentication resulted in a blank login page. This issue has been resolved. | DE213169 |
| Previously, in certain scenarios, when you attempted to log in to Integrity Mobile app using SSO, the app would freeze, and a blank SSO Login screen appeared. This issue has been resolved. | DE212126 |
Layers of Protection Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance usability, Layers of Protection Analysis has been moved from INTEGRITY to a new section named SAFETY in the module navigation menu. | US607110 |
Management of Change
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance usability, Management of Change has been moved from INTEGRITY to a new section named SAFETY in the module navigation menu. | US607110 |
| Description | Tracking ID |
|---|---|
| Previously, when you created a MOC Change Project record, the record displayed a global site key, irrespective of the user's default site. This issue has been resolved. | DE210853 |
Manage Translations
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, if your culture settings was other than English, and a large amount of customized localized metadata strings were created for the culture, performance issues were observed. This issue has been resolved. | DE212941 |
Metrics and Scorecards
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance functionality, a Super User, MI Metrics Admin, and MI Metrics User will override MI Metrics Viewer. To facilitate this enhancement, sequential permission check is introduced so that MI Metrics Viewer does not override Super User, MI Metrics Administrator, and MI Metrics Users, as per the earlier functionality. | US612356 |
| Description | Tracking ID |
|---|---|
| Previously, when Worst, Critical, Target, Stretch and Best values of a KPI were retrieved from an APM Query, and when you updated the measures, the Updated actual values/scores section did not display any values or limits. This issue has been resolved. | DE209856 |
Mobile Proof Testing
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance usability, Mobile Proof Testing has been moved from INTEGRITY to a new section named SAFETY in the module navigation menu. | US607110 |
OT Connect
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to retrieve readings using the OT Connect OPC UA Adapter, if the quality of a reading value was bad, an error occurred. This issue has been resolved. Now, if the reading value is of bad quality, no error message appears. | DE213527 |
Policy Designer
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance user experience, you can now export the summary of execution results of a Policy Instance in a Microsoft Excel spreadsheet. You can also filter summary of execution results and download the filtered result. | F74835 |
| When triggering an email using the Email Contact node, you can specify whether to include a message to state that all time values are shown in the UTC format. To facilitate this enhancement, a new check box named Include Time Zone message in email body has been added to the Email Contact node. | US616320 |
| During policy validation, in the To Address field in an Email Contact node, the syntax of the email address that you enter is now validated. If the syntax is incorrect, an error message appears. | US615877 |
| When configuring scheduled policy execution, if you observe daylight saving and you need not change scheduling time from the standard time to daylight saving, you can now use the new Disregard Daylight Saving Time check box. When you select the check box, the schedule will remain at the same scheduled time. | US619449 |
| To enhance usability, node icons for State Transition, Python, JSON Parser, and API nodes have been refreshed. | US596295 |
| To enhance the traceability of policy designs, you can now see when a policy model was last updated on the Policy Designer Overview page. To facilitate this enhancement, a new field named Last Policy Model Change Date has been added to the Policy family. This field is updated only if a substantive modification to the policy model is saved. The queries used by the Policies and Module Workflow Policies sections of the Policy Designer Overview page have been updated to display the new field. If you have previously modified these queries, in order to view the last policy model change date on the Policy Designer Overview page, you must copy the updated queries from the baseline folder and reapply your modifications. | US377128 |
| Description | Tracking ID |
|---|---|
| Previously, Policy instances were getting deactivated when uploaded from data loader for the Policies that have Point Value node. This issue has been resolved. | DE213015 |
|
Previously, when the Case Node input value was selected as text but not populated, you were still able to save the Policy. This issue has been resolved. | DE212205 |
| Previously, if an extra space was added before or after an Email ID, the Policy execution failed, and the Email Contact node displayed an error message, indicating that the specified string was not in the format required for an email address. This issue has been resolved. | DE211154 |
| Previously, the Email Contact node failed when Policy information was unable to fit in the Reference Document description field. This issue has been resolved. Now, Policy information is stored in the Long Description field of the Reference document. | DE210795 |
| Previously, when you executed an API node for a certain URL path of APM APIs, an error occurred. This issue has been resolved. | DE210448 |
| Previously, the schedule for background cleanup job was enhanced to provide additional options to control the job start time, end time, and selection of time zone. However, because of this change, the job start time was inconsistent. This issue has been resolved. | DE210437 |
Previously, if the entity key did not match with an available Policy, the Policy Trigger service displayed the NotExistException error and the job appeared in the Failed section of the Job Monitoring Dashboard. This issue has been resolved. | DE210056 |
| Previously, the Delete Relationship and Create Relationship node check did not happen if an existing relationship was already available for the given entity records. This issue has been resolved. | DE209749 |
| Previously, even if you removed the JSON Parser node from the Design workspace, a message appeared, stating that you must add at least one JSON path expression, and you could not save your changes until you deactivated the policy. These issues have been resolved. | DE207252 |
Production Loss Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance usability, while entering a value for the Causing Asset field in the Production Event datasheet or the Associated Unit field in a Production Unit, you can now select from all the assets that are filtered based on the site to which you are assigned in the Asset Finder. | US610733 |
Queries
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, a common time zone was not used for all date constants in a query. This issue has been resolved. Now, the user's time zone is considered for all date constants. | US603779 |
| Previously, if the Family ID Template contained a hyperlink field, the generated ID included the full anchor tag. This has been resolved. Now, the generated ID contains only the embedded text. | DE211926 |
Previously, on a PostgreSQL datasource, if you attempted to run a query that used constant time, an error occurred. For example, if you run the following query, an error occurred: | DE210430 |
| Previously, if you added a hyperlink in a query, and a value returned by the query that was inserted into the hyperlink as a parameter included special characters that must be encoded (for example, ?, %, or &), the hyperlink did not work as expected. This issue has been resolved. To enable the resolution of this defect, now, when you add a manual hyperlink definition in a query that includes an explicit parameter value containing a special character, you must enter the URL-encoded value of the parameter. For example, the manual hyperlink to open a record in Record Manager using a datasheet with the ID To support this fix, a utility that identifies affected query hyperlinks has been made available. Please refer to KBA 000069850. Contact GE??Vernova support if you need help in updating existing query hyperlink definitions. |
DE210003 |
| Previously, if a union query with state ID and families containing different caption for a common state ID, was executed, the state caption of the family that was first in the union query was considered. This has been resolved. Now, each family contains a unique caption. | DE207744 |
| Previously, if you accessed the Query page, a warning message appeared. This issue has been resolved. | DE207421 |
| Previously, the State Caption and Operation Caption fields were not translated to the language based on your culture settings. This issue has been resolved. | DE206277 |
Record Manager
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To support other enhancements, the Long Description field has been added to the Reference Document family. | US615589 |
To enhance usability, you can now create a link to open the Bulk Data Form to create a new record using the URL format #bdf-screen/<family key or id>. | US610043 |
| To enhance usability, you can now configure picklists in datasheets with more than 1000 values. Now, when you scroll to the end of the picklist, additional values will be loaded automatically. | US606012 |
| To enhance usability, when you view records in the Bulk Data Form, you can set a value for Rows per page, and this configuration is saved as a user preference in the database. | US518585 |
| Description | Tracking ID |
|---|---|
| Previously, if you attempted to close the Bulk Data Form with unsaved changed, then selected Yes in the Unsaved Changes window, the Bulk Data Form remained open. If you then continued to use the Bulk Data Form, duplicate records may have been created. This issue has been resolved. Now, when you select Yes in the Unsaved Changes window, the Bulk Data Form is closed. | DE213437 |
Previously, if you configured a URL to create a record in a separate datasheet window, the window was blank. This issue has been resolved. Now, you can use any of the following URL formats to create a record in a new datasheet window:
| DE213078 |
| Previously, if you selected Authentication Required to Insert or Update Records in a family configuration, when you attempted to save a record in the family, the user ID field in the Re-Authenticate to Complete Save window was not populated, authentication failed and the record was not saved. This issue has been resolved. | DE212889 |
| Previously, when you specified the Family Key as the FamilyKey parameter value using the Bulk Data Form URL, an error occurred and the URL failed to open. This issue has been resolved. | DE212746 |
| Previously, when using Record Manager to open a record with State Management enabled for the family or related families, there was a performance issue. This issue has been resolved. | DE212902 |
| Previously, state captions were not translated in the Manage State Assignment window. This issue has been resolved. Now, the state captions are translated as expected. | DE212779 |
| Previously, when you accessed a Master Detail datasheet, the Reference Documents link was not always displayed in the More Options menu (). This issue has been resolved. | DE212356 |
| Previously, if you configured a tabular datasheet with four or five columns, when you opened the datasheet in the Bulk Data Form, the column headings were incorrect. This issue has been resolved. | DE211338 |
Previously, when you accessed the datasheet in a dialog window for a family where Site Filtering was not configured, then the save button ( ) was not displayed. This issue has been resolved. | DE209862 |
| Previously, in a multi-value field, the check box to select all the options was not properly formatted and was difficult to select. This issue has been resolved. Now, when you point to or select a multi-value field, the check box is correctly displayed. | DE209383 |
| Previously, when a masked field was history enabled, while displaying the revision history, the actual value was displayed. This issue has been resolved. Now the masked field values appear as *. | DE208498 |
| Previously, when editing a record in the Bulk Data Form, switching between fields did not work as expected. This issue has been resolved. However, if your connection to the APM system is slow, when you tab out of a field that is the predecessor of a dependent picklist, you may notice a delay in populating the dependent picklist with the correct values. | DE208318 |
Previously, when you selected the Turn ON Help Text? option, the help text was not displayed for fields that used the ( ) button to open a selection window. This issue has been resolved. | DE210151 |
| Previously, when you printed a datasheet as a PDF, sometimes, fields split over a page break. This issue has been resolved. Now, the entire field and associated label appear on the same page, which may result in extra space at the end of some pages. | DE139835 |
| Description | Tracking ID |
|---|---|
| Due to unexpected impact on other features, the capability to copy data from fields that are locked for editing has been removed. | DE210640 |
| Description | Tracking ID |
|---|---|
| If a field is configured with a picklist using a query with input parameters, the picklist is restricted to the first 1000 results in the query. Workaround: You can reconfigure the query to remove the input parameters; additional values are then loaded into the picklist when you scroll to the end of the list. There is no limit to the number of values in the picklist. | 280180 |
Reliability Analytics
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enable new workflows, Simulation Results Family includes values from the Trends and Histograms. | US619613 |
| To enhance performance in System Reliability, you can specify which scenarios to use when running a simulation. You can also view whether a scenario is valid and thus decide whether to run the scenario. | US616818 |
To enhance usability, you can now copy the following records:
|
|
| Description | Tracking ID |
|---|---|
| Previously, in a Production Analysis, when you changed the Subdivided Region colors, the cancel option did not cancel when changing the color via text code. This issue has been resolved. | DE208953 |
| Previously, when you clicked the Production Analysis full screen button to expand, and then clicked the button again to reduce the screen size, the Production Analysis window closed completely, functioning similar to the Collapse button. This issue has been resolved. | DE208950 |
Previously, a user with read-only access could perform the following tasks:
| DE136782 |
Reliability Centered Maintenance
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, in the Analysis section, when you accessed the Risk Matrix of a Failure Effect, and updated the Unmitigated Risk value of Probability for Financial category, then the Mitigated Risk value of Probability for Financial category was also updated. This issue has been resolved. | DE213244 |
| Previously, if you had configured Risk Card in Asset Strategy Management to display the Driving Unmitigated Risk Category field, an error appeared when you attempted to open either an Asset Strategy or an Asset Strategy Template. This issue has been resolved. | DE212112 |
| Previously, if the initial state of an FMEA/RCM Recommendation was modified, and you attempted to consolidate those Recommendations, an error occurred. This issue has been resolved. | DE211137 |
| Previously, after creating an RCM Analysis, if you made additional changes in the same page, the page was unresponsive. However, if you refreshed the page, your changes were saved. This issue has been resolved. | DE210388 |
| Previously, when you attempted to upload data using the Reliability Centered Maintenance (RCM) Data Loader, the asset details were not updated for the RCM Analysis Template. This issue has been resolved. | DE209066 |
Risk Based Inspection
This topic provides a list of product changes released for this module in this version.
RBI 580 and RBI 581
| Description | Tracking ID |
|---|---|
To enhance usability, you can now save result grid column preferences in more workspaces and sections. To facilitate this enhancement, advanced settings are enabled for these result grids:
| US615105 |
| To enhance usability, when linking an RBI Recommendation to an existing Inspection Task, the Task Details field value in the Inspection Task is now appended with the Recommended Inspection Scope field value in the RBI Recommendation (instead of overwriting the value). Note: The Task Details value will not be updated if you unlink an RBI Recommendation from an Inspection Task. | US614166 |
| To enhance usability, filter options selected in the RBI Tree are now saved and applied to all assets and units for the user. To facilitate this enhancement, filter options are saved as a user preference and are applied to the RBI Tree when the user opens an asset or unit in the RBI Asset or the RBI Process Unit workspace. Note: The Show All Assets filter displayed in the asset view of the Process Unit tree is not saved as a user preference. | US611024 |
To enhance usability, for an RBI analysis, the Calculate icon color now changes to orange if calculation is required in the following scenarios:
| F74197 |
| Description | Tracking ID |
|---|---|
| Previously, when you attempted to implement the RBI Recommendation to an Inspection Task from the RBI Inspection Plan page, the Desired Interval Basis field was not populated. This issue has been resolved. Now, the Desired Interval Basis field value is populated based on the RBI Recommendation Methodology. | DE212588 |
| Previously, the Risk Based Inspection Overview page failed to load sometimes due to a performance issue in the Inspection/TM Updates section. This issue has been resolved. To facilitate this fix, the following query has been enhanced to provide better performance: Public\Meridium\Modules\Risk Based Inspection\Queries\Inspections More Current Than All Analysis | DE212439 |
| Previously, active analyses were not displayed in the RBI tree if they were what-if analyses and the Include What-If filter was not selected. This issue has been resolved. Now, active What-If analyses are displayed in the RBI Tree regardless of the Include What-If filter option selection. | DE211551 |
| Previously, the Consequence Evaluation section in the RBI Analysis workspace did not expand correctly after collapsing the section. This issue has been resolved. | DE210816 |
| Previously, the Component ID field was erroneously copied when duplicating or applying an RBI Analysis with the Copy Recommendation for Degradation Mechanisms option selected. This issue has been resolved. Now, the Component ID field on the newly created analysis will be set correctly based on the parent RBI Component. | DE210293 |
| Previously, sometimes, the Inspection Plan link in the header of the RBI Analysis workspace did not work. This issue has been resolved. Now, the link always directs you to the Inspection Plan workspace. | DE210009 |
| Description | Tracking ID |
|---|---|
| In the Recommended Actions section in the Inspection Plan page, if you select the link in the Source box for a consolidated Recommendation, an error occurs because the consolidated Recommendation is linked to the asset instead of the analysis. Workaround: After you select the link in the Source box, the RBI Asset page appears; you can then select the asset from the RBI Tree in the left pane. | DE213947 |
RBI 581
| Description | Tracking ID |
|---|---|
| To enhance usability, you can now create or update RBI 581 Mechanical Fatigue Damage Evaluation records using the RBI 581 Data Loader. To facilitate this enhancement, a new worksheet named DME_MechanicalFatigue has been added to the Risk Based Inspection (RBI) 581.xlsx worksheet. Note: All the field values in DME_MechanicalFatigue worksheet should be of data type character because they are System Code Table IDs. | US616583 |
| You can now export 581- Mechanical Fatigue Degradation Mechanism Evaluations linked to RBI 581 Risk Analyses from the RBI Analysis Export workspace. | US613282 |
| You can now choose to hide the financial risk on the risk card in the RBI 581 Risk Analysis workspace for components types other than the Storage Tank Bottom. To facilitate this enhancement, a new preference named Hide Financial Risk on RBI Risk Card is added to the RBI Admin Preferences page. | US611031 |
| Description | Tracking ID |
|---|---|
| Previously, if the Description field of an RBI Component contained a value greater than 250 characters, when you attempted to copy an RBI 581 Risk Analysis or generate Recommendations for the analysis, an error occurred. This issue has been resolved. | DE213100 |
| Previously, an error was displayed when duplicating or applying an RBI 581 Risk Analysis with the Copy Recommendation for Degradation Mechanisms option selected and the Cost Escalation field on the linked Consequence Evaluation was empty. This issue has been resolved. | DE211414 |
| Previously, if you used calculated corrosion rate for a 581-Hydrofluoric Acid Corrosion Degradation Mechanism, the corrosion rate was calculated incorrectly for the Alloy 400 Base Material, if the HF Concentration field was between 63-64% or Operating Temperature is between 175-200 Fahrenheit. The issue has been resolved. | DE209631 |
| Previously, when creating an Inspection with the Task Type field set to RBI581 Non-Intrusive and Extent field set to 35% UT SCAN or 35% RT, the Inspection Confidence was automatically set to C- FAIRLY. This issue has been resolved. Now, you can select 35% UT SCAN or 35% RT (C) or 35% UT SCAN or 35% RT (D) for the Extent field to determine the Inspection Confidence. | DE208165 |
| Previously, the Base Material Calculated Rate field in an RBI 581 External Damage Evaluation was not updated when the related RBI 581 Risk Analysis was calculated. To ensure that updated calculation inputs are considered for calculation, now, if the Selected External Corrosion Rate field in an RBI 581 External Damage Evaluation is set to Calculated, the Base Material Calculated Rate field is populated when the related RBI 581 Risk Analysis is calculated. To facilitate this enhancement, the Base Material Calculated Rate is not populated until the RBI 581 Risk Analysis is calculated. | DE149252 |
| Description | Tracking ID |
|---|---|
| If you attempt to create an Inventory Group with an existing name, the error message that appears states that the value you have entered is not valid instead of stating that the group name already exists. | DE213820 |
Root Cause Analysis
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, in certain instances, an RCA Team Member was not correctly linked to an RCA Verification. This issue has been resolved. | US622592 |
| Previously, in PLA Admin Screen, the Event Code section was not getting populated sometimes. This issue has been resolved. | DE213110 |
| Previously, the due dates for Preserve records in the Analysis Summary were not sorting correctly in ascending or descending order. This issue has been resolved. | DE212393 |
Rounds Designer
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| You can now migrate data from Legacy Rounds to Rounds Pro. To facilitate this functionality, a new feature, Legacy Rounds Migration has been added to the Rounds Designer Admin page. | US620366 |
To improve usability, the following enhancements have been made in the Rounds Routes Data Loader:
| DE212468 |
| Description | Tracking ID |
|---|---|
| Previously, when you accessed a Route containing multiple conditional Checkpoints, the Route appeared blank. This issue has been resolved. | DE213261 |
| Previously, when you attempted to load data using the Rounds Routes Data Loader, an error occurred. This issue has been resolved. | DE212468 |
| Previously, in Measurement Location Template records, if you selected Update Existing Checkpoints, an error occurred. This issue has been resolved. | DE212163 |
| Previously, the Rounds Routes Data Loader failed to auto-populate the Non Compliance Date and Non Compliance Next Check Date fields in the Checkpoint Task Family even when the Schedule was provided. This issue has been resolved. | DE209224 |
| Previously, if you were a Secured User, you could not add an existing Measurement Location to a Route. This issue has been resolved. | DE203739 |
| Previously, when using Rounds Routes Data Loader to load values in a Measurement Location, if the Asset ID field was valid and the Asset Description field was blank, the Asset Description field was not populated correctly. This issue has been resolved. | DE205267 |
| Description | Tracking ID |
|---|---|
| The NFC functionality on Ecom - Smart-Ex 01 ROW DZ1 device with Android version 12 and later is no longer supported because the underlying NFC plug-in used in Legacy Rounds is not supported in Android OS version 12 and later. | US619043 |
Rounds Pro
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Steps Data loader now has the ability to update existing Measurement Step records. | US561508 |
Rounds Pro Mobile
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance usability, when deploying Rounds Pro Mobile as part of a corporate Mobile Device Management solution, you can now preconfigure the desired Server URL and Datasource fields that the user would otherwise have to provide manually. When configured, the Server Settings screen appears momentarily, but will automatically apply the settings and display the Login page. The ability to provide managed configurations is available for both Android and iOS apps. | US588960 |
Rules
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| APM Rules Editor now supports Microsoft Visual Studio 2022. | US619735 |
| Description | Tracking ID |
|---|---|
Previously, when you attempted to compile projects using the CompileCustomProjects utility, an error occurred. This issue has been resolved. Now, compilation with known DLLs works as expected. In addition, a new external configuration file has been added to control DLLs and imports that are not handled in the baseline configuration file. |
|
SIS Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance usability, when performing a Proof Test, if State Management is disabled for the SIS Proof Test Template family, the Functional Test Template field will now display all the available templates. | US615783 |
| To enhance usability, you can now import a file of up to 200 MB in size from Exida. To facilitate this enhancement, the Scheduler Service is used to import files. | US609468 |
| To enhance usability, SIS Management has been moved from INTEGRITY to a new section named SAFETY in the module navigation menu. | US607110 |
| Description | Tracking ID |
|---|---|
| Previously, in a Protective Instrument Loop Logic Solver or in a Protective Instrument Device, when you selected the Manual Entry check box, the check box was disabled even before the record was saved. This issue has been resolved. | DE212225 |
| Previously, you could not delete a Protective Instrument Loop Logic Solver channel for a Custom Failure Rate Logic Solver. This issue has been resolved. | DE210278 |
| Previously, when you created a custom Protective Instrument Loop Device (Sensor) in the Custom Failure Data section, the Trip State field was disabled. This issue has been resolved. | DE209457 |
| Previously, when you promoted Recommendations to Asset Strategy Management (ASM), a blank message appeared for Recommendations linked to different assets for the same Instrumented Function. This issue has been resolved. | DE205595 |
| Previously, for a Protective Instrument Loop Group (Sensor and Final Element), in some scenarios, additional voting options were displayed for the Voting field. This issue has been resolved. | DE205016 |
| Previously, the APM documentation did not provide sufficient information of the datasheet fields mapped for exSILentia V4 to APM. Now, the documentation lists all the datasheet fields that are mapped from exSILentia V4 loops to APM. For more information, refer to the General References section in the SIS Management module documentation. | DE204114 |
State Management
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| Previously, when assigning a user to a state and then deleting the user, you were able to enter a new user only by clicking outside the user box area. This issue has been resolved. | DE200839 |
Thickness Monitoring
This topic provides a list of product changes released for this module in this version.
| Description | Tracking ID |
|---|---|
| To enhance usability, you can specify the minimum thickness type as Output Node in Policy for a T-Min calculation, and the calculation will return the minimum thickness type as an output along with the T-Min value. For more information on T-min calculation, refer to the About the Calculated T-Min Value using Policy section in the Thickness Monitoring documentation. | US616242 |
| Description | Tracking ID |
|---|---|
| Previously, in the Analysis Output section, if you changed the value in the Analysis Type box, the link for the Thickness Measurement Location was not updated correctly. This issue has been resolved. | DE213486 |
| Previously, the Near Measurement Date and Near Measurement Value fields in a TML Corrosion Analysis were being set when there were less than three measurements. This issue has been resolved. | DE210712 |
| Previously, when you modified multiple Thickness Measurement values in the Readings field in the Readings window, the scroll button was not operational. This issue has been resolved. | DE209715 |
| Description | Tracking ID |
|---|---|
| When loading data using the Thickness Monitoring Data Loaders, you may experience degraded performance. | DE207334 |