General Reference

RBI URLs

There is one URL route associated with Risk Based Inspection: rbi. The following table describes the various paths that build on the route, and the elements that you can specify for each.

ElementDescriptionAccepted Value(s)Notes

rbi/unit : Opens the Risk Based Inspection Overview page.

rbi/unit/<UnitEntityKey> : Displays the selected unit on the Risk Based Inspection Overview page.

<UnitEntityKey> Specifies the level of the Asset Hierarchy for the RBI unit that you want to view. Any Unit Entity Key that corresponds to an asset in the Asset Hierarchy.The Unit Entity Key must be present in the URL to display the correct page.

rbi/processunit/<ProcessUnitEntityKey> : Opens the Unit Summary page for the selected process unit.

rbi/processunit/<ProcessUnitEntityKey>/corrosionloop/<CorrosionLoopEntityKey>: ​Displays the Corrosion Loop Overview section.

rbi/processunit/<ProcessUnitEntityKey>/corrosionloop/<CorrosionLoopEntityKey>/​component/<ComponentEntityKey>: Displays the selected Component Overview section.

rbi/processunit/<ProcessUnitEntityKey>/corrosionloop/<CorrosionLoopEntityKey>/​component/<ComponentEntityKey>/analysis/AnalysisEntityKey: Displays the selected Analysis Details section.

rbi/processunit/<ProcessUnitEntityKey>/corrosionloop/<CorrosionLoopEntityKey>/​component/<ComponentEntityKey>/protectedasset/<ProtectedAssetEntityKey>: Displays the selected protected asset on the Asset Summary page.

rbi/processunit/<ProcessUnitEntityKey>/corrosionloop/<CorrosionLoopEntityKey>/​component/<ComponentEntityKey>/protectedcomponent/<ProtectedComponentEntityKey>: Displays the Component Overview section for the selected protected component.

<ProcessUnitKey>Specifies the level of the Asset Hierarchy for the RBI Process Unit that you want to view. Any Process Unit Entity Key that corresponds to an asset in the Asset Hierarchy.The Process Unit Entity Key must be present in the URL to display the correct page.
<CorrosionLoopEntityKey>Specifies the level of the Asset Hierarchy for the Corrosion Loop that you want to view. Any Corrosion Loop Entity Key that corresponds to a Corrosion Loop in the Asset Hierarchy.The Corrosion Loop Entity Key must be present in the URL to display the correct page.
<ComponentEntityKey>Specifies the level of the Asset Hierarchy for the RBI Component that you want to view. Any Component Entity Key that corresponds to an RBI Component in the Asset Hierarchy.The Component Entity Key must be present in the URL to display the correct page.
<AnalysisEntityKey>>Specifies the level of the Asset Hierarchy for the RBI Analysis that you want to view. Any Analysis Entity Key that corresponds to an RBI Analysis in the Asset Hierarchy.The Analysis Entity Key must be present in the URL to display the correct page.
<ProtectedAssetEntityKey>Specifies the level of the Asset Hierarchy for the protected asset that you want to view. Any Protected Asset Entity Key that corresponds to a protected asset in the Asset Hierarchy.The Protected Asset Entity Key must be present in the URL to display the correct page.
<ProtectedComponentEntityKey>Specifies the level of the Asset Hierarchy for the Protected Component that you want to view. Any Protected Component Entity Key that corresponds to an Protected Component in the Asset Hierarchy.The protected Component Entity Key must be present in the URL to display the correct page.

rbi/asset/<AssetEntityKey> : Displays the selected asset on the Asset Summary page.

rbi/asset/<AssetEntityKey>/component/<ComponentEntityKey> :​ Displays the selected Component Details section of the Asset Summary page.

rbi/asset<AssetEntityKey>/component/<ComponentEntityKey>/​analysis/<AnalysisEntityKey> :Displays the Analysis Details section of the Asset Summary page.

rbi/analysis/<AnalysisEntityKey> : Displays the Analysis Details section of the Asset Summary page.

<AssetEntityKey> Specifies the level of the Asset Hierarchy for the RBI asset that you want to view. Any Asset Entity Key that corresponds to an asset in the Asset Hierarchy.The Asset Entity Key must be present in the URL to display the correct page.
<ComponentEntityKey> Specifies the level of the Asset Hierarchy for the RBI Component that you want to view. Any Component Entity Key that corresponds to an RBI Component in the Asset Hierarchy.The Component Entity Key must be present in the URL to display the correct page.
<AnalysisEntityKey> Specifies the level of the Asset Hierarchy for the RBI Analysis that you want to view. Any Analysis Entity Key that corresponds to an RBI Analysis in the Asset Hierarchy.The Analysis Entity Key must be present in the URL to display the correct page.

rbi/corrosionloop/<CorrosionLoopEntityKey> :Displays the Corrosion Loop Summary page.

<CorrosionLoopEntityKey> Specifies the level of the Asset Hierarchy for the Corrosion Loop that you want to view. Any Corrosion Loop Entity Key that corresponds to a Corrosion Loop in the Asset Hierarchy.The Corrosion Loop Entity Key must be present in the URL to display the correct page.
rbi/evergreen/<ContextEntityKey>: Accesses the Ready for Evergreening tab in the Evergreening workspace.

rbi/evergreen/<ContextEntityKey>/<JobKey>: Accesses the Created tab in the Evergreening workspace.

<ContextEntityKey>Specifies the Entity Key of the process unit or Functional Location.The Entity Key of a Functional Location or process unit in the Asset Hierarchy.The Entity Key must be present in the URL to display the correct page. A value of -1 can be used to access the home level of the Asset Hierarchy.
<JobKey>Specifies the scheduled job that processes an RBI analysis duplication.The Job Key of a scheduled job for an RBI analysis duplication.None.

URLs

Example URLDestination

rbi/unit

The Risk Based Inspection Overview page.
rbi/unit/2305330 The Risk Based Inspection Overview page for the specified unit.

rbi/processunit/64253024663

The Unit Overview section for the specified process unit.

rbi/processunit/64253024663/corrosionloop/64253024702

The Corrosion Loop Overview section for the specified process unit.

rbi/processunit/64253024663/corrosionloop/64253024702/component/64253024704

The Component Overview section for the specified process unit.

rbi/processunit/64253024663/corrosionloop/64253024702/component/64253024704/analysis/64253024712

The Analysis Details section for the specified process unit.

rbi/processunit64253024663/corrosionloop/64253024702/component/64253024704/protectedasset/2509506

The protected Asset Summary page for the specified process unit.

rbi/processunit/64253024663/corrosionloop/64253024702/component/64253024704/protectedcomponent/64253024705

The protected Component Overview page for the specified process unit.
rbi/asset/2509505 The Asset Summary page for the specified asset.
rbi/asset/2509505/component/3476094 The Component Details section of the Asset Summary page for specified RBI Component.

rbi/asset/2509505/component/3476094/analysis/3221498

-or-

rbi/analysis/3221498

The Analysis Details section of the Asset Summary page for the specified RBI Analysis.
rbi/corrosionloop/4842819 The Corrosion Loop Summary page for the specified Corrosion Loop.
rbi/evergreening/25926450The Ready for Evergreening tab in the Evergreening workspace.
rbi/evergreening/25926450/5617a312-6b47-402c-8766-1c5d854aa87aThe Created tab in the Evergreening workspace.

RBI 580 and Pipeline Management System Code Tables

The following table lists the System Code Tables that are used by RBI 580 and Pipeline Management.

RBI 580

Table IDTable DescriptionFunction
MI DAMAGE FACTORDamage Factor ClassThe values in this System Code Table are used when you calculate an RBI PRD Analysis.
MI DEGRADATION MECHANISM TYPESDegradation Mechanism TypesPopulates the Degradation Mechanism list in Potential Degradation Mechanism records.
MI GROUPING CORR TYPEGrouping Corrosion TypesPopulates the Corrosion Type list.
MI GROUPING EQP TYPEGrouping Equipment TypesPopulates the Grouping Equipment Type list.
MI INSPECTION RESULTInspection ResultPopulates the Test Results list in Criticality Over Pressure Deg. Mech. Eval. and Criticality Leak Deg. Mech. Eval. records.
MI PDM FILTERMI RBI, Potential Degradation FilterUsed to limit the Potential Degradation Mechanisms records that can be linked to RBI Components.
MI PRD DISCHARGE LOCATIONMI PRD DISCHARGE LOCATIONPopulates the PRD Discharge Location list in RBI PRD Criticality Analysis records.
MI PROTECTED EQUIP TYPESProtected Equipment TypesPopulates the Protected Equipment Type list in RBI PRD Criticality Analysis records.
MI_RBI_Area_HumidityMI RBI Area Humidity

Populates the Area Humidity field in the following records:

  • RBI Components
  • RBI Criticality Analysis
MI_RBI_Coating_QualityMI RBI Coating QualityPopulates the Coating Quality field in Criticality Ext. Corr. Deg. Mech. Eval. records.
RBI_INT_COR_TYPERBI Internal Corrosion Type

Populates the Selected Corrosion Rate field on Criticality Int Corr. Deg. Mech. Eval. records.

  • 0 = Estimated Rate
  • 1 = Short Term Average Corrosion Rate
  • 2 = Long Term Average Corrosion Rate
  • 3 = Controlling Corrosion Rate
MI RBI RISK CATEGORYRBI Risk CategoryPopulates the Risk Category list in Asset Group records.
MI SERVICE SEVERITYSeverity of the Process FluidPopulates the Service Severity list in RBI PRD Criticality Analysis records.
MI_STRESS_LOOKUP_TABLEMI_STRESS_LOOKUP_TABLE

Populates the Stress Lookup Table field in the following records:

  • RBI Components
  • RBI Criticality Analysis
MI_CONF_CALC_ACTIONSRBI Flexible Calculation ActionsPopulates the list in the Action field in Flexible Calculation Configuration records.
MI_CONF_VAL_ACTIONSRBI Flexible Validation ActionsPopulates the list in the Action field in Flexible Calculation Validation records.

Pipeline Management

The following table lists the System Code Tables that are used by Pipeline Management.

Table IDTable DescriptionFunction

MI PIPELINEBELOWWATERSURFACE

Depth Below Water Surface

The values in this table are used to populate the list in the Below Water Surface field in Criticality Third Party Deg. Mech. Eval. records.

MI PIPELINEPROTECTIONCOVER Mechanical Pipe Protection The values in this table are used to populate the list in the Mechanical Pipe Protection field in Criticality Third Party Deg. Mech. Eval. records.
MI PIPELINEWARNINGSTRIP Warning Strip The values in this table are used to populate the list in the Pipeline Marker Tape field in Criticality Third Party Deg. Mech. Eval. records.
MI PIPELINEBELOWBOTTOMWATERWAY Depth Below Bottom of Waterway The values in this table are used to populate the list in the Below Bottom of Waterway field in Criticality Third Party Deg. Mech. Eval. records.
MI PIPELINECONCRETECOATING Concrete Coating The values in this table are used to populate the list in the Concrete Coating field in Criticality Third Party Deg. Mech. Eval. records.
MI PIPELINEACTIVITYLEVEL Activity Level The values in this table are used to populate the list in the Activity Level field in Criticality Third Party Deg. Mech. Eval. records.
MI PIPELINEABOVEGROUNDFACILITY Above Ground Facilities The values in this table are used to populate the list in the Above Ground Facilities field in Criticality Third Party Deg. Mech. Eval. records.
MI PIPELINELINELOCATING Line Locating (One-Call System) The values in this table are used to populate the list in the One-Call System field in Criticality Third Party Deg. Mech. Eval. records.
MI PIPELINEEDUCATIONPROGRAM Public Education Program The values in this table are used to populate the list in the Public Education field in Criticality Third Party Deg. Mech. Eval. records.
MI PIPELINERIGHTOFWAY Right-Of-Way Condition The values in this table are used to populate the list in the Right-Of-Way Condition field in Criticality Third Party Deg. Mech. Eval. records.
MI PIPELINEPATROLFREQ Patrol Frequency The values in this table are used to populate the list in the Patrol Frequency field in Criticality Third Party Deg. Mech. Eval. records.
MI PIPELINEPREVIOUSDAMAGE Previous Damage The values in this table are used to populate the list in the Previous Damage field in Criticality Third Party Deg. Mech. Eval. records.
MI PIPELINELANDMOVEMENTPOTENTIAL Land Movement Potential The values in this table are used to populate the list in the the RBI Pipeline Analysis and Criticality RBI Pipeline Segment families.
MI PIPELINEPRESSURESURGEPOTENTIAL Pressure Surge Potential The values in this System Code Table are used by the RBI Pipeline Analysis and Criticality RBI Pipeline Segment families.
MI PIPELINESCADA SCADA Level The values in this table are used to populate the list in the SCADA field in the RBI Pipeline Analysis and Criticality RBI Pipeline Segment families.
MI PIPELINEPOPULATIONDENSITYADJUSTED Population Density Adjustment The values in this System Code Table are used to populate the list in the Population Density field in Pipeline Consequence Evaluation records.
MI PIPELINESOILTYPEFACTOR Soil Type Factor The values in this System Code Table are used to populate the list in the Soil Type field in Pipeline Consequence Evaluation records.
MI PIPELINEHIGHVALUEAREAFACTOR High Value Area Factor The values in this System Code Table are used to populate the list in the High Value Area field in Pipeline Consequence Evaluation records.
MI PIPELINESUGGESTEDCLEANUPCOSTS Suggested Clean Up Costs The values in this System Code Table are used to populate the list in the Suggested Clean Up field in Pipeline Consequence Evaluation records.
MI PIPELINE SEGMENT TYPE Segment Type The values in this System Code Table are used to populate the list in the Segment Type field in RBI Pipeline Segment records.
MI_RBI_Area_Humidity MI RBI Area Humidity

Populates the Area Humidity field in the following records:

  • RBI Components
  • RBI Pipeline Analysis
MI_RBI_Insulation_Condition MI RBI Insulation ConditionPopulates the Insulation Condition field in Criticality Ext. Corr. Deg. Mech. Eval records.
MI_STRESS_LOOKUP_TABLE MI_STRESS_LOOKUP_TABLE

Populates the Stress Lookup Table field in the following records:

  • RBI Components
  • RBI Pipeline Analysis

About Potential Degradation Mechanisms (PDM)

Potential Degradation Mechanisms (PDM) records are used to represent ways in which a component might fail (e.g., mechanical fatigue). These records can be linked to RBI Components and are used to predict and prevent mechanical failure. Each Potential Degradation Mechanisms record that is linked to a Corrosion Loop represents a degradation mechanism, or a way in which the components in that Corrosion Loop might fail.

After a Corrosion Loop is linked to PDMs, as you link RBI Components to the Corrosion Loop, those RBI Components will be linked automatically to all of the Potential Degradation Mechanisms that are linked to the Corrosion Loop. Each PDM that is linked to an RBI Component represents a way in which that component can fail.

Baseline Potential Degradation Mechanisms (PDMs)

GE Digital APM provides several Potential Degradation Mechanisms that are classified as follows, based on the value in the Methodology Type field:

  • Qualitative
  • Quantitative

All of the PDMs apply to RBI Components. Pressure Relief Devices (PRDs) have a separate set of PDMs, which are different from the ones related to RBI 580 and RBI 581.

GE Digital APM provides the following Qualitative Potential Degradation Mechanisms:

  • 885 Embrittlement
  • Amine Cracking (ASCC)
  • Brittle Fracture
  • Carbonate Cracking
  • Carburization
  • Caustic Cracking
  • Chloride Stress Corrosion Cracking (CI SCC)
  • Creep
  • Criticality Calculator External Corrosion
  • Criticality Calculator Internal Corrosion
  • Erosion
  • Ext Chloride SCC
  • Graphitization
  • Hot Hydrogen Attack
  • Hydrogen Embrittlement
  • Hydrogen Induced Cracking
  • Hydrogen Stress Cracking (HSC)- Hydrofluoric Acid
  • Liquid Metal Embrittlement
  • Mechanical Fatigue
  • Phase Change Embrittlement
  • Polythionic Acid SCC (PTA)
  • Refractory Failure
  • Stress Corrosion Cracking
  • Sulfide Stress Cracking (SSC)
  • Temper Embrittlement
  • Thermal Fatigue
  • Wet H2S (Blistering, SOHIC, HIC, SSC)
  • Wet H2S Damage

PDMs for PRD Components:

  • Blocked Discharge
  • Blocked Discharge - Admin Control
  • Control Valve Failure (Fail Opposite)
  • Control Valve Failure (Fail Safe)
  • Electrical Power Failure
  • Exchanger Tube Rupture
  • Fire
  • Liquid Overfill
  • Liquid Overfill - Admin Control
  • Loss of Cooling
  • Runaway Reaction
  • Thermal Relief
  • Thermal Relief - Admin Control
  • Tower Pump Failures
  • Leak

Valid Fluids for RBI Criticality Analyses

The following toxic fluids are valid for RBI 580. When you create an RBI Criticality Analysis, you must select one of the following values in the Toxic Mixture Fluid box.

  • ACR (Acrolein)
  • AN (Acrylonitrile)
  • BF3
  • CO
  • Chlorine
  • EO
  • H2S
  • HCHO
  • HF
  • HCl
  • HCN
  • Hydrazine
  • Methyl Mercaptan
  • NH3
  • Perchloromethylmercaptan
  • Phosgene
  • Propionitrile
  • Propylene Oxide
  • Sulfur Trioxide
  • VAM

About the RBI RISK MATRIX BY RBI COMPONENT Graph

The RBI RISK MATRIX BY RBI COMPONENT graph on the Risk Based Inspection Overview page plots the total number of components based on their consequence of failure and probability of failure values. A component is considered while plotting the graph only if the component is linked to an active RBI Criticality Analysis, RBI PRD Criticality Analysis, or RBI Pipeline Analysis.



The color of each cell in the graph is based on the risk category, as described in the following table.

Risk CategoryColor
Low Green
MediumYellow
Medium High Orange
High Red

If you pause over a cell on the graph, the probability of failure and consequence of failure values appear, along with the number of components whose consequence of failure and probability of failure match the value in the cell. If you select the cell, the RBI Risk Matrix page appears, displaying the list of components that meet the aforementioned criteria, along with their equipment details, inspection priority, risk category, consequence of failure, and probability of failure values.



You can access a component in the list by selecting the hyperlink in the Component Description column.

RBI Risk Matrix

Suppose there are five RBI Components (each linked to an active RBI Criticality Analysis) in an asset. The following table provides the consequence of failure and probability of failure values for the components.

Component NameConsequence of FailureProbability of Failure
Component 1E1
Component 2E3
Component 3B2
Component 4E1
Component 5B2

Since there are two components whose consequence of failure and probability of failure are E and 1 respectively, the number 2 appears in the E1 cell in the graph. Similarly, the numbers 2 and 1 appear in the B2 and E3 cells respectively.

When you select the E1 cell, the RBI Risk Matrix page appears, displaying the following list of components:

  • Component 1
  • Component 4

About RBI Criticality Analysis State Assignments and Operations

RBI Criticality Analysis uses specific states and operations from the baseline State Assignments of GE Digital APM.

In RBI, State Configuration is used in the following families:

  • RBI Criticality Analyses
  • RBI Recommendations
  • Asset Groups

RBI State Assignments and Operations Diagram



When an RBI Criticality Analysis is set to any of the states highlighted in green, the analysis is active. When an RBI Criticality Analysis is set to any of the states highlighted in red, the analysis is inactive.

Additionally, in the diagram, you can see dotted lines and solid lines.

  • Dotted lines represent operations that are performed automatically when another RBI Criticality Analysis that is linked to the same RBI Component is set to Risk Completed.
  • Solid lines represent operations that you can perform manually.

Details

Initial State: The Created state is the initial state of all new RBI Criticality Analyses.

Reserved States and Operations: The following tables state whether or not the baseline states and operations are reserved. You cannot remove or modify reserved states or operations. You can, however, add your own states and operations to State Assignment.

StatesIs Reserved?
ApprovedYes
Accepted by ASMYes
ArchivedYes
CreatedNo
ImplementedYes
Pending ApprovalYes
Re-EvaluatingYes
RejectedNo
Risk CompletedYes
OperationsIs Reserved?
Archive (all Archive operations)Yes
ImplementNo
Finalize Risk No
ReevaluateNo
ApproveNo
RejectNo
ReimplementNo
Promote to ASM Yes
Submit for Approval No

State Assignment Roles: By default, no State Assignment Roles are assigned to any state in the RBI Criticality Analysis State Assignment.

Analysis Restrictions Based on State

The following table outlines the actions that you can perform on an RBI Criticality Analysis based on its state.

Analysis StateIs Calculation Allowed?Can Analysis Be Deleted?Can Analysis Fields Be Modified?Can RBI Degradation Mechanisms Be Added or Deleted?Can What-If Analyses Be Created?Can RBI Recommendations Be Created?
CreatedYesYesYesYesYesNo
Risk CompletedNoNoNoNoYesYes
Pending ApprovalNoNoNoNoNoNo
ApprovedNoNoNoNoNoNo
ImplementedNoNoNoNoNoNo
ArchivedNoNoNoNoNoNo
RejectedNoNoNoNoNoNo
Re-EvaluatingNoNoNoNoNoNo
Accepted by ASMNoNoNoNoNoNo

Datasheet Configuration: By default, states and operations will appear in the datasheet when you access an RBI Criticality Analysis in RBI, the Record Manager, or the Bulk Data Form.

If an RBI Criticality Analysis is set to Risk Completed, however, you can modify the value in the Mitigated Risk field in the RBI Degradation Mechanism to which it is linked.

RBI 580 Security Groups

The following table lists the baseline Security Groups available for users within this module, as well as the baseline Roles to which those Security Groups are assigned.

Important: Assigning a Security User to a Role grants that user the privileges associated with all of the Security Groups that are assigned to that Role. To avoid granting a Security User unintended privileges, before assigning a Security User to a Role, be sure to review all of the privileges associated with the Security Groups assigned to that Role. Also, be aware that additional Roles, as well as Security Groups assigned to existing Roles, can be added via Security Manager.
Security GroupRoles
RBI Security Groups
MI RBI Administrator

MI Mechanical Integrity Administrator

MI RBI Analyst

MI Mechanical Integrity Administrator

MI Mechanical Integrity Power

MI RBI Viewer

MI APM Viewer

MI Mechanical Integrity Viewer

RBI Policy Security Groups
MI RBI Calculation Policy DesignerNone
MI RBI Calculation Policy Viewer

MI Mechanical Integrity Administrator

MI Mechanical Integrity Power

MI RBI Recommendation Policy DesignerNone
MI RBI Recommendation Policy Viewer

MI Mechanical Integrity Administrator

MI Mechanical Integrity Power

MI RBI Risk Mapping Policy DesignerNone
MI RBI Risk Mapping Policy Viewer

MI Mechanical Integrity Administrator

MI Mechanical Integrity Power

The baseline family-level privileges that exist for these Security Groups are summarized in the following table.

Security GroupPrivileges to the Policy Family
MI RBI Calculation Policy DesignerView, Update, Insert, Delete
MI RBI Calculation Policy ViewerView
MI RBI Recommendation Policy DesignerView, Update, Insert, Delete
MI RBI Recommendation Policy ViewerView
MI RBI Risk Mapping Policy DesignerView, Update, Insert
MI RBI Risk Mapping Policy ViewerView

The following table provides a list of the baseline family-level privileges that exist for the MI RBI Administrator, MI RBI Analyst, and MI RBI Viewer Security Groups.

Note: If you have activated only the Risk Based Inspection license (and not the RBI 581 license), privileges to some of the following families do not exist for the MI RBI Administrator, MI RBI Analyst, and MI RBI Viewer Security Groups.
FamilyMI RBI AdministratorMI RBI AnalystMI RBI Viewer
Entity Families
Asset GroupView, Update, Insert, DeleteView, Update, Insert, DeleteView
Consequence Evaluation FactorsView, Update, Insert, DeleteViewView
CorrosionViewViewView
Corrosion Analysis SettingsViewViewView
Criticality Consequence EvaluationView, Update, Insert, DeleteView, Update, Insert, DeleteView
Criticality Env. Crack. Deg. Mech. Eval.View, Update, Insert, DeleteView, Update, Insert, DeleteView
Criticality Ext. Corr. Deg. Mech. Eval.View, Update, Insert, DeleteView, Update, Insert, DeleteView
Criticality Int. Corr. Deg. Mech. Eval.View, Update, Insert, DeleteView, Update, Insert, DeleteView
Criticality Other Damage Mech. Eval.View, Update, Insert, DeleteView, Update, Insert, DeleteView
Criticality RBI Component - Cylindrical Shell View, Update, Insert, DeleteView, Update, Insert, DeleteView
Criticality RBI Component - Exchanger BundleView, Update, Insert, DeleteView, Update, Insert, DeleteView
Criticality RBI Component - Exchanger HeaderView, Update, Insert, DeleteView, Update, Insert, DeleteView
Criticality RBI Component - Exchanger TubeView, Update, Insert, DeleteView, Update, Insert, DeleteView
Criticality RBI Component - PipingView, Update, Insert, DeleteView, Update, Insert, DeleteView
Criticality RBI Component - Tank BottomView, Update, Insert, DeleteView, Update, Insert, DeleteView
Data Mapping Column-Field PairView, Update, Insert, DeleteViewView
Data Mapping GroupView, Update, Insert, DeleteViewView
Data Mapping Query View, Update, Insert, DeleteViewView
Degradation Mechanisms Evaluation FactorsView, Update, Insert, DeleteView, Update, Insert, DeleteView
EquipmentView, Update, Insert, DeleteView, Update, Insert, DeleteView
Functional LocationView, Update, Insert, DeleteView, Update, Insert, DeleteView
Grouping ElementView, Update, Insert, DeleteView, Update, Insert, DeleteView
Inspection TaskView, Update, Insert, DeleteView, Update, Insert, DeleteView
Inventory Group ConfigurationView, Update, Insert, DeleteViewView
General RecommendationViewView, Update, Insert, DeleteView
Meridium Reference TablesView, Update, Insert, Delete

View

View
PolicyViewViewView
Potential Degradation MechanismsView, Update, Insert, DeleteViewView
RBI 581 Admin OptionsView, Update, Insert, DeleteViewView
RBI 581 Brittle Fracture Damage EvaluationView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI 581 Consequence EvaluationView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI 581 Cracking Damage EvaluationView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI 581 Damage Mechanism EvaluationView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI 581 External Cracking Damage EvaluationView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI 581 External Damage EvaluationView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI 581 HTHA Damage EvaluationView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI 581 Mechanical Fatigue Damage EvaluationView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI 581 Risk AnalysisView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI 581 Thinning and Lining EvaluationView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI Criticality AnalysisView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI Custom DM Evaluation Configuration View, Update, Insert, DeleteViewView
RBI Custom DM Evaluation Configuration DetailsView, Update, Insert, DeleteViewView
RBI Custom DM Evaluation ValidationView, Update, Insert, DeleteViewView
RBI Custom DM Evaluation Validation DetailsView, Update, Insert, DeleteViewView
RBI Degradation MechanismsView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI Inspection Auto-Selection CriteriaView, Update, Insert, DeleteViewView
RBI RecommendationView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI Risk Matrix MappingView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI Strategy Mapping ConfigurationView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI Strategy Mapping DetailsView, Update, Insert, DeleteView, Update, Insert, DeleteView
RBI SystemView, Update, Insert, DeleteView, Update, Insert, DeleteView
Reference DocumentView, Update, Insert, DeleteView, Update, Insert, DeleteView
Risk AssessmentView, Update, Insert, DeleteView, Update, Insert, DeleteView
Risk RankView, Update, Insert, DeleteView, Update, Insert, DeleteView
Risk TranslationView, Update, Insert, DeleteView, Update, Insert, DeleteView
SAP System ViewViewView
Strategy Logic CaseView, Update, Insert, DeleteViewView
Strategy Reference TableView, Update, Insert, DeleteView, Update, Insert, DeleteView
Task TypeView, Update, Insert, DeleteView, Update, Insert, DeleteView
Time Based Inspection IntervalView, Update, Insert, DeleteView, Update, Insert, DeleteView
Time Based Inspection SettingView, Update, Insert, DeleteView, Update, Insert, DeleteView
Relationship Families
Belongs to a UnitView, Update, Insert, DeleteView, Update, Insert, DeleteView
Data Mapping has Column-Field PairView, Update, Insert, DeleteViewView
Data Mapping has QueryView, Update, Insert, DeleteViewView
Data Mapping has SubgroupView, Update, Insert, DeleteViewView
Has Asset GroupView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has Child RBI Criticality AnalysisView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has Consequence EvaluationView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has Consolidated RecommendationsViewView, Update, Insert, DeleteView
Has Corrosion AnalysesView ViewView
Has Corrosion Analysis SettingsView ViewView
Has DatapointsViewViewView
Has Degradation MechanismsView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has InspectionsView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has Inspection ScopeViewViewView
Has Potential Degradation MechanismsView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has RBI ComponentsView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has RBI Criticality AnalysisView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has RBI Custom DME ConfigurationView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has RBI Custom DME Validation View, Update, Insert, DeleteViewView
Has RBI Degradation Mechanisms EvaluationView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has RBI Strategy Mapping ConfigurationView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has RBI SystemsView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has RecommendationsView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has Reference DocumentsView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has Reference ValuesViewViewView
Has SAP SystemViewViewView
Has Superseded RecommendationsViewView, Update, Insert, DeleteView
Has Task RevisionViewView, Update, Insert, DeleteView
Has TasksView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has Time Based Inspection IntervalView, Update, Insert, DeleteView, Update, Insert, DeleteView
Has Unmitigated RiskView, Update, Insert, DeleteView, Update, Insert, DeleteView
Is Based on RBI Degradation MechanismsView, Update, Insert, DeleteView, Update, Insert, DeleteView
Is MitigatedView, Update, Insert, DeleteView, Update, Insert, DeleteView
Is Part of GroupView, Update, Insert, DeleteView, Update, Insert, DeleteView
Mapped to RBI ComponentView, Update, Insert, DeleteView, Update, Insert, DeleteView
Represents InspectionsView, Update, Insert, DeleteView, Update, Insert, DeleteView
Note: Security privileges for all modules and catalog folders can be found in the APM documentation.

The following families are used only to support integration with the Inspection Management module:

  • Has Inspection Scope
  • Has Time Based Inspection Interval
  • Time Based Inspection Interval
  • Time Based Inspection Setting

Specifically, certain features of the Time-Based Inspection Settings functionality, which you can use if the Inspection Management license is active, are facilitated by these privileges.

RBI Site Filtering

Example

Consider an organization that has three sites, Site X, Site Y, and Site Z.

Scenario 1: User assigned to only Site X.

This user can access or modify records that are linked to assets only in Site X. However, this user can access all the Potential Degradation Mechanisms in the database.

Scenario 2: User assigned to only Site X and Site Y.

This user can access or modify records that are linked to assets only in Site X or Site Y. However, this user can access all the Potential Degradation Mechanisms in the database.

Scenario 3: Super User

This user can access or modify records that are linked to assets in Site X, Site Y, or Site Z.