V4.5.0.0.7

Action Management

This topic provides a list of product changes released for this module in this version.

Table 1. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, the Strategy Actions section in Action Management had performance issues. These issues have been resolved. For more information, refer to KBA 000037560.DE157018
Previously, when you attempted to create a predecessor operation for an initial state in recommendations, an error occurred. This issue has been resolved.DE155709

APM Mobile Application

This topic provides a list of product changes released for this module in this version.

Table 2. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, on the GE Digital APM mobile application on an Android device, an API error occurred when you attempted to load the app into the Google Play store. This issue has been resolved. The API level is now updated, and the error does not occur during loading into Google Play store.
Note: Based on the implementation of API level 29, support for Android versions is impacted as below:
  • Android versions 5.0.x is not supported
  • Android versions 5.1.x remains the same
  • Android versions 6, 7, 8, and 9 are unaffected
DE157605
Previously, a route that was marked done after you had cleared its values in the GE Digital APM mobile application, entered a locked state and a warning message appeared that all readings were not uploaded. This issue has been resolved.DE154584

Asset Criticality Analysis

This topic provides a list of product changes released for this module in this version.

Table 3. Enhancements and New FeaturesThe following enhancements and new features have been added.
DescriptionTracking ID
The ability to perform criticality assessment on a system has been enhanced. To facilitate this enhancement, the following changes have been made:
  • The Enable System Assessment check box has been added to the ACA Administrator page.
  • You can now perform criticality assessment on the ACA Analysis page for a system, using the risk matrix method.
Note: This feature is available only for sites using the risk matrix method for criticality assessment.
US475412
Table 4. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, when you imported a data loader workbook that contained multiple criticality checklist analyses, an error occurred. This issue has been resolved.DE156545

Asset Hierarchy

This topic provides a list of product changes released for this module in this version.

Table 5. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, you could only edit an Asset Group that you created. This issue has been resolved. You can now modify any asset group if you are a super user or you are assigned to the MI Foundation Admin role.DE155255
Previously, when you attempted to delete an Asset Group that contained assets, an error occurred. This issue has been resolved.DE154388
Previously, when you created a new user assigned only to the default site, the user's site assignment was not saved. This issue has been resolved.DE153841

Asset Strategy Management

This topic provides a list of product changes released for this module in this version.

Table 6. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, it was taking longer durations when activating an asset strategy or it was timing out. This issue has been resolved.DE159179
Previously, when activating a template containing controlled strategies, if you deleted an action that was already implemented, an error occurred. This issue has been resolved.DE158109
Previously, when you applied a master template to multiple assets or activated a template with a large number of controlled strategies, there was a performance issue. This issue has been resolved. DE157400
Previously, if the risk matrix categories contained a hyphen (-) character, and you attempted to load data through the ASM data loader, an error occurred. This issue has been resolved.DE157341

Calibration Management

This topic provides a list of product changes released for this module in this version.

Table 7. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, when you created a Calibration Event record using a Calibration Template whose Detail records were in a random order, the associated Calibration Result records were sorted incorrectly. This issue has been resolved. Now, irrespective of the order of the Detail records, the Calibration Result records appear in the correct order based on the test sequence numbers.DE157282

Compliance Management

This topic provides a list of product changes released for this module in this version.

Table 8. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, when creating or updating an Inspection Plan based on a Compliance Strategy Template, if the policy associated with the template was executed for an asset and returned output nodes whose values did not match the Compliance Strategy ID field of the associated Compliance Strategy records, the status of the scheduled job incorrectly indicated that the Inspection Plan was created or updated successfully and no error message was added to the log file. This issue has been resolved.DE156745

eLog

This topic provides a list of product changes released for this module in this version.

Table 9. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, when you accessed the Shifts workspace of the eLog Administrator page, the functional locations hierarchy of the Functional Locations pane took longer than expected to load, and then the process timed out. This issue has been resolved.DE157056
Previously, if an eLog assignment datasheet had more fields that can fit the window, you could not scroll down to enter data into the fields. This issue has been resolved.DE156991
Previously, in the eLog Shift reports, the Functional Location and the source of log entries of the shift did not appear in the report. This issue has been resolved. Now, the relevant queries to create the required reports are updated and are available for import. For more information on modifying the query, refer to KBA 000037767.DE155562

Family Policies

This topic provides a list of product changes released for this module in this version.

Table 10. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, the scheduled job to delete policy execution history did not delete all the expected records. This issue has been resolved.DE153662

Generation Availability Analysis

This topic provides a list of product changes released for this module in this version.

Table 11. Enhancements and New FeaturesThe following enhancements and new features have been added.
DescriptionTracking ID
To enhance usability, in the HEADER and TRAILER records of the CEA Event Report, value from the Primary Utility Code field is included instead of value from the Company Name field.US484647
To enhance performance, in CEA events and reports, you can now include a Common Mode Outage in the Event datasheet, Performance Record, and Event Reports. To facilitate this enhancement, when creating a new Event, you can now select the type of Common Mode Outage for that Event. For more information on how to add the Common Mode Outage, refer to KBA 000037694.
  • US484342
  • US482251
To enhance performance, in CEA Events, when the state of the event is moved to Unit Approved, for the CEA Event Types 11-1,11-2,14,14-1,14-2, the Cause Code System, Cause Code Component, Cause Code, Amplification Code, and Verbal Description fields in the Primary Event datasheet are no longer required fields. For more information on modifying the query, refer to KBA 000037693.US481224
You can now see a warning message displayed for all types of Events when there is an Overlapping Event. To facilitate this enhancement, you can now select the Flag Overlapping Events option under Filter in the Events List of Unit Summary workspace. This records the overlapping events and you can find an indicator which lists the overlapping events linked to the Event.US478289
Table 12. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, if the time zone associated with your user account was different than the time zone of the plant, and you created an event, calculations in the performance record did not consider events in the following scenarios:
  • An event for which the start or end date was the last date of the year.
  • An event for which the start or end date was the first date of the year.

This issue has been resolved. Now, when you create an event, the event Start Date and End Date fields are automatically adjusted according to the time zone of the plant while creating a Performance record.

For more information, refer to KBA 000037696.

US481943
Previously, when generating single or bulk Performance Record and Regulatory Reports, no error or warning messages were displayed. This issue has been resolved. Now, error or warning messages appear in the following scenarios:
  • If the Performance Record is already in the approved state for a particular month and year, a warning appears when you regenerate a Performance Record.
  • If the Performance Record or an Event does not exist for a particular month and year, an error message appears when you regenerate a Performance Report or an Event Report.
  • If the Performance Record exists for a particular month and year and is not in the approved state, a warning message appears.
  • DE157355
  • DE157354
  • DE156297
Previously, when calculating the duration of events in performance calculation, Daylight Saving Time was not considered that resulted in incorrect values. This issue has been resolved.DE157289
Previously, in the Performance Summary section of the Performance Record, the Synchronous Condensing Hours field was populated with calculations based on the hours of Non Curtailing Events. The Synchronous Condensing Hours and Service Hours were not calculated as expected. This issue has been resolved.
The following changes have been made:
  • Synchronous Condensing Hours field is now converted to an input field, so that you can enter the hours in this field.
  • Non Curtailing Event Hours field is now added to the datasheet. If there are any Non Curtailing Events, the hours are shown in the Non Curtailing Event Hours field after calculations.
  • Synchronous Condensing Hours is now included in the warning message along with Pumping Hours and Capacity Values, to indicate the changed values after manual entry.

For more information, refer to KBA 000037695.

DE157275

Hazards Analysis

This topic provides a list of product changes released for this module in this version.

Table 13. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, when you attempted to add a team member to a Hazard Analysis (HAZOP and What If), users across all sites were displayed. This issue has been resolved. Now, only the users linked with the site of the Hazard Analysis are displayed. US482906
Previously, when you attempted to create the first System/Node for a HAZOP Analysis or a What If Analysis, an error occurred intermittently. This issue has been resolved.DE154362

Inspection Management

This topic provides a list of product changes released for this module in this version.

Table 14. Enhancements and New FeaturesThe following enhancements and new features have been added.
DescriptionTracking ID
To enhance the usability of the mobile Field Data Collection feature, using the mobile application, the following enhancements have been made:
  • For images captured against Checklist Findings using the mobile application in the Field Data Collection feature, the resulting Reference Documents created after the data is synced are now linked to both the original record against which it was taken and the root inspection event record.
    Note: The reference document stored against the Checklist Findings from the browser based workflow will not be related to the root inspection event record.
  • An image gallery button is added to the inspection event header which displays all the images taken for that inspection in a consolidated location. The image gallery button also displays a count of collected images and it is disabled when there are no images.
  • For checklist inspections, similar functionality is added for each checklist category and an image button is found to the right side of each category header. All images collected against finding items within that category are displayed in the image gallery.
  • For images against Checklist Findings, the image gallery dialog displays both the description of the Reference Document as well as the Finding Summary value from the finding record.
    Note: The height of individual Checklist Finding rows has been increased for more visibility of the summary text.
US483605
Table 15. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, when you attempted to print a large number of inspection reports at a time, the print job took a long time to complete, and some of the reports were not printed. This issue has been resolved. Now, in this scenario, the failed reports will be processed automatically.DE149838

Layers Of Protection Analysis

This topic provides a list of product changes released for this module in this version.

Table 16. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, when you upgraded the GE Digital APM from V3.6 to V4.5, and you attempted to modify the Layers of Protection Analysis, the Calculated SIL value changed. This issue has been resolved.DE156529

Life Cycle Cost Analysis

This topic provides a list of product changes released for this module in this version.

Table 17. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, in LCC Team Members section of the Analysis Summary page, when you accessed the HR record, it opened the list of all available APM users. This issue has been resolved. Now, when you open the HR Record in Teams, it loads only the APM users with site permissions corresponding to the parent analysis.DE157503

Management of Change

This topic provides a list of product changes released for this module in this version.

Table 18. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, when you attempted to add a team member to a Change Project, users across all sites were displayed. This issue has been resolved. Now, only the users linked with the site of the Change Project are displayed. US482908

Metrics and Scorecards

This topic provides a list of product changes released for this module in this version.

Table 19. Enhancements and New FeaturesThe following enhancements and new features have been added.
DescriptionTracking ID
In the Scorecard Details page, the scorecard view that you select is now saved as your user preference. US473927

Policy Designer

This topic provides a list of product changes released for this module in this version.

Table 20. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, if you triggered a large number of policy executions in rapid succession, or scheduled a policy with a large number of active instances, some of the executions were skipped. This issue has been resolved.DE158128
Previously, you were unable to specify any language and culture other than English for policy execution results. This issue has been resolved. Now, you can configure the language and the culture for policy execution by updating the settings for the MIJOB system user.DE155902
Previously, the scheduled job to delete policy execution history did not delete all the expected records. This issue has been resolved.DE153662

Production Loss Analysis

This topic provides a list of product changes released for this module in this version.

Table 21. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, in the Production Data page, the column headings of the Data Grid were not translated to the language corresponding to your culture setting. This issue has been resolved.DS834

Queries

This topic provides a list of product changes released for this module in this version.

Table 22. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, when you saved a catalog query with a name containing angle brackets (i.e. <>), the name was not displayed correctly in the Query page and, when you selected the link in the Query page, the query did not open in the Query Designer page. This issue has been resolved. DE157021
Previously, when you attempted to export a query result as an excel file, an error occurred if the result contained data in scientific format. This issue has been resolved.DE155420

Risk Based Inspection

This topic provides a list of product changes released for this module in this version.

RBI 580

Table 23. Enhancements and New Features

The following enhancements and new features have been added.

DescriptionTracking ID
You can now hide the RBI Risk Matrix in the RBI Analysis workspace for an RBI 580 Analysis. You will still be able to access the Default Risk Matrix. To facilitate this enhancement, a new preference, Hide RBI Risk Matrix, has been added to the Global Preferences page in RBI Admin settings. US482378

RBI 581

Table 24. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, when calculating an RBI 581 Risk Analysis with a toxic mixture, if one of the following values was selected in the Toxic Model field, the Weighted Toxic Consequence Area field on the related RBI 581 Consequence Evaluation was calculated incorrectly using release mass:
  • ALCL3
  • CO
  • EE
  • EO
  • HCI
  • Nitric Acid
  • NO2
  • Phosgene
  • Propylene Oxide
  • TDI

This issue has been resolved. Now, in this scenario, the Weighted Toxic Consequence Area field considers the release rate. For more information, refer to KBA 000037566.

DE155384

Record Manager

This topic provides a list of product changes released for this module in this version.

Table 25. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, when you attempted to update a record with an external hyperlink in the TEXT field or saved the record with an external hyperlink, an error occurred, and the datasheet did not load. This issue has been resolved.DE155391
Previously, in a reference document, when you added a reference to a shared directory and saved the document, an error occurred. This issue has been resolved.DE154245

Reliability Analytics

This topic provides a list of product changes released for this module in this version.

Table 26. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, you were not able to ignore the datapoints by clicking the datapoints on the chart. This issue has been resolved.DE158932
Previously, when you customized the Target Completion Date field available in the Recommended Actions pane into an optional field, an error occurred when you attempted to create a new recommendation. This issue has been resolved.DE155211

Root Cause Analysis

This topic provides a list of product changes released for this module in this version.

Table 27. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, when you attempted to load a large RCA Logic Tree, the time taken was more than expected. This issue has been resolved. Now, a few API calls have been optimized to improve the performance.DE158265
Previously, in RCA Team Members section of the Analysis Summary page, when you accessed the HR record, it opened the list of all available APM users. This issue has been resolved. Now, when you open the HR Record in Teams, it loads only the APM users with site permissions corresponding to the parent analysis.DE157503
Previously, the list of users in the Team Members section of a Root Cause Analysis, took a long time to load. This issue has been resolved.
Note: The first 25 users are displayed first, and the additional users are added to the list as you scroll.
DE157482
Previously, when you accessed the RCA Event Diagram originating from GE Digital APM V3 in GE Digital APM V4, the nodes did not appear as expected. This issue has been resolved.DE156999
Previously, in the Team Members tab of the RCA Analysis Summary section, as an MI RCA PROACT Admin you were unable to modify the Team Member permissions when you were not part of that Team on an RCA Analysis. This issue has been resolved.DE156389
Previously, when you accessed the RCA Event Diagram for existing analyses, some icons did not appear in the Palette section. This issue has been resolved.DE156112
Previously, for an RCA Preserve Item Record, you received an email for the Preserved Items that were due. The hyperlink included in this email message did not work as expected. This issue has been resolved.DE155281
Previously, when you customized the Target Completion Date field available in the Recommended Actions pane into an optional field, an error occurred when you attempted to create a new recommendation. This issue has been resolved.DE155211

Rounds Data Collection

This topic provides a list of product changes released for this module in this version.

Table 28. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, a route that was marked done after you had cleared its values in the GE Digital APM mobile application, entered a locked state and a warning message appeared that all readings were not uploaded. This issue has been resolved now.DE154584

Rounds Designer

This topic provides a list of product changes released for this module in this version.

Table 29. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, some queries that supported data loaders were not functioning as expected. This issue has been resolved. The specific queries have now been updated to improve performance for the supported data loaders.DE156647

SAP Adapters

This topic provides a list of product changes released for this module in this version.

Table 30. Enhancements and New FeaturesThe following enhancements and new features have been added.
DescriptionTracking ID
GE Digitals ECC6 ABAP code has successfully completed the SAP ABAP Security Code Scan Assessment on April 13, 2021 and is documented in the report number 18188.

As per this report, the overview confirms the execution of the vendor product in accordance with SAP security guidelines. It, however, does not guarantee that the product is risk-free. A successful execution indicates that all the security flaws classified as “Priority 1” and “Priority 2” have been resolved or mitigated by GE Digital.

US477932
Table 31. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, when you ran the Work Management Integration Adapter, and then attempted to update the tasks, the relationship between the tasks and a few workflow specific objects was removed. This issue has been resolved.DE156246

SIS Management

This topic provides a list of product changes released for this module in this version.

Table 32. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, when you attempted to add a team member to an SIL Analysis, users across all sites were displayed. This issue has been resolved. Now, only the users linked with the site of the SIL Analysis are displayed.US482905
Previously, when you used the Import from Exida functionality in SIL Analysis, the performance of GE Digital APM was not as expected if there were a large number of analyses present in APM. This issue has been resolved.DE158039
Previously, when you used the Export to Exida functionality in SIL Analysis, the performance of GE Digital APM was not as expected, if there were a large number of analyses present in APM. This issue has been resolved.DE157727
Previously, if the Hazards Analysis license was not active in GE Digital APM, when you attempted to add a team member to the team associated with a Safety Integrity Level (SIL) Analysis, an error occurred. This issue has been resolved.DE156236

Thickness Monitoring

This topic provides a list of product changes released for this module in this version.

Table 33. Resolved IssuesThe following issues, which existed in one or more previous versions, have been resolved.
DescriptionTracking ID
Previously, when you accessed the T-Min Calculator page in Thickness Monitoring, 1000 TMLs were displayed per page. This resulted in performance degradation when T-Min for the collection of TMLs was calculated. This issue has been resolved. Now 100 TMLs is displayed per page.DE159213
Previously, when a Thickness Measurement Location had a Skipped Measurement record as its last active measurement and you updated the data for the other TML records in the asset, the Analysis Output section did not display updated data for the following fields if the Controlling Corrosion Rate of the asset became less than the TML’s Controlling Corrosion Rate.
  • Asset Average Corrosion Rate
  • Asset Average Corrosion Rate Next Inspection Date
  • Asset Average Corrosion Rate Remaining Life
  • Asset Average Corrosion Rate Retirement Date

This issue has been resolved.

DE157777