The Power of Yes in action

YES. In India, a Dongfang Electric generator showed signs of earth fault, stopping any electricity production from the unit. After inspections, our teams advised for a full rotor rewind and balancing at Sanand factory. We were able to deliver the equipment 8 days in advance, saving $4 million USD for our customer.

Discover more: Other OEM steam turbine and generator services

YES. Last year in the United States, for a Westinghouse steam turbine experiencing high eccentricity and vibration at bearings, we were able to provide the best cycle time for repair compared to the original OEM. We performed the inspections, rotor straightening, 24 blade replacements, and reassembly in less than 50 days.

Discover more: Other OEM steam turbine and generator services

Yes. Our team in #India successfully repaired and refurbished two 10.5MW Dongfang rotor ahead of schedule. The team had to move the rotors to various factories for TIG welding, machining , blade slot cutting and blading, and balancing across the country. Despite the nationwide lockdown, our team was able to complete and deliver the rotors to the customer one month ahead of schedule.

Discover more: Other OEM steam turbine and generator services

YES. Following a failure of a Westinghouse generator in an US power plant, GE was the only services provider that proposed a repair solution versus a costly rotor swap. This short-cycle project saved our customer from months of downtime.

Discover more: Other OEM steam turbine and generator services

YES. Through a 10-year service agreement, our team is executing 2 outages per year on Westinghouse steam turbine and generator equipment for a U.S. nuclear operator.

Discover more: Other OEM steam turbine and generator services

YES. Our team in #India recently completed a 270MW GVPI type generator stator and rotor repair for RattanIndia Power Limited. Despite the challenges, the project was completed in record time of 90 days. This included a rotor rewind and balancing in the GE factory in #Sanand, in India for India. Delivered ahead of schedule, the unit is now back online, powering again the country. This is #ThePowerOfYes.

Can GE solve my issues with oOEM steam equipment quickly? YES. When RABEC suffered a shutdown of one of their plants due to unforeseen vibration issues on their other OEM steam equipment, our team worked 24/7 to help bring the power plant back online. With thorough root-cause analysis, engineering and outage support, as well as on-site repairs, the units are now back to full load again. This is the Power of Yes.

YES. Beginning of November, we connected our synchronous condenser at the Uchtelfangen substation. Our technology allows the substation to not only connect the Rhine-Ruhr area with the Saarland and transport wind power, but also to deliver reactive power to maintain steady voltage on the grid. In addition, our team will ensure its maintenance for the next 5 years through an MYA contract. This is the Power of Yes

YES. Our team completed the first-of-its-kind excitation system partial upgrade for our customer TAQA Neyveli in India, in 8 days only and without dismantling the legacy system. It will improve operations and ease maintenance of the plant located in Tamil Nadu. This is the Power of Yes.

YES. When a U.S. coal plant needed to reduce its operating costs while staying compliant with EPA emissions standards, they turned to GE’s SulfiTrac AQCS solution – a combination of hardware and software to monitor and control the concentration of sulfite. Based on the performance of its first unit installation, the plant expects to save up to $1.9 million annually by reducing power consumption and needs for additives while maintaining emissions compliance.

YES. Our service workshop in Rugby worked closely with a leader in nuclear power generation in #Europe to identify and repair a water leak in the winding cooling system. Our teams also designed and manufactured a new pipe and performed a partial rewind. This is #ThePowerOfYes

YES. LEAG selected our team to perform maintenance for the next 5 years on 16 Siemens boiler feed pumps and outage management at the Jänschwalde Power Station, one of the largest plants in Germany. The site generates enough electricity to power 5.7 million households, and plays a vital role with grid stability in areas including Cottbus, Peitz and Lausitz in the country’s eastern province, also supported by fluctuating renewable energy sources. This is #ThePowerOfYes

YES. In Morocco, our team just delivered a major overhaul of a steam turbine and generator for IMACID at their Jorf Lasfar site. The GE Power team provided parts, repairs, services and technical support to return the unit to service in less than one month. This is #ThePowerofYes

YES. In Pakistan we just retrofitted two 323MW other OEM steam turbines at a thermal power plant of HUBCO that resulted in over 4% heat rate improvement. What’s more, our team delivered this major retrofit 4 days ahead of schedule. This is #ThePowerofYes

YES. Our team is currently performing a steam turbine retrofit for a coal plant in Croatia. Improving the heat rate will boost plant efficiency by 3.6% and reduce coal consumption by more than 22,000 tons annually.
Learn more

+3.5% efficiency

YES. Recently, our team in India identified and solved a leakage issue on a Beijing Bezhong generator. In less than two weeks, a repair plan was designed with the customer, bar corrections implemented, and the plant was back up and running.

YES. One recent modernization project implemented during a planned outage has delivered significant operational improvements for our customer⁠—increasing component availability by 28 percent, extending the facility's operating life by an additional 15 years and increasing output by more than 20 percent.
Learn more

+28% availability

YES. We have a century of experience in the ammonia industry sector. Recently, our team delivered a steam turbine upgrade for one of the world’s largest ammonia producers and supplied spare turbine parts for compressor trains. The results? The facility reduced its operational costs by doubling the length of time between maintenance intervals.
Learn more

YES. Our teams can work on more than 90 oOEM brands, and we are currently doing just that for two coal power plants in Turkey. With the steam turbine, generator and boiler coming from different competitors, we will modernize and refurbish the plants to boost efficiency levels by 6% and significantly decrease local pollution.
Learn more

+6% efficiency

YES. Working with one of the world’s leading steel producers, POSCO, our team is retrofitting a 50-year-old steam turbine. The solution will nearly double its ability to generate steam for steel production, enabling POSCO to meet its production goals and stay competitive globally.
Learn more

X2 steel production

YES. By applying primary and secondary NOx reduction measures on the boilers in 10 oOEM units—representing a combined 1,130 megawatts (MW) of electricity generating capacity— our team and technology reduced the NOx emissions of the largest utility in Central and Eastern Europe by 60%.
Learn more

60% fewer emissions

YES. Our team in South Africa was called in to help following the discovery of a broken plate resting on the outlets of the turbine of a coal power plant. Within 12 days, the onsite project team removed the broken plate, repaired the turbine and returned the unit back to full service, a week ahead of the targeted dates.

Back online in 12 days

YES. The RDK8 steam power plant in Karlsruhe, Germany, has achieved a 47.5% net thermal efficiency while producing 919 MW of electricity. Today, RDK8 is the world’s most efficient coal-fired steam power plant thanks to GE’s ultra-supercritical boiler and steam turbine generator.
Learn more

47.5% efficiency

YES. As the EPC contractor, GE successfully delivered the Manjung 4.1 MW ultra-supercritial plant in Malyaisia, in just four years and within budget. We received awards from Asian Power and International Project Management Association for this project.
Learn more

2 EPC awards

YES. The Saudi's state-owned Saline Water Conversion Corporation decided to build the third phase of Yanbu 3 with both power generation and seawater desalination in mind. The plant will be one of the country’s first supercritical power plants to run on heavy fuel oil. We provided the core GE technology, including boiler, steam turbine and generator and expertise in plant EPC. The plant will deliver 2.7GW and 550,000 m3 of desalinated water per day

2.7 GW

YES. GE will supply the two conventional power islands for Hinkley Point C, UK, which includes the Arabelle steam turbine, generator, and other critical equipment. Already the biggest steam turbine in operation in China, HPC’s Arabelle turbines will be the largest ever built—longer than an Airbus 380—and capable of producing 1,770 MW each.
Learn more

1,770 MW in 1 shaft line

YES. OPG appointed GE as the project leader for the refurbishment of the steam turbines, generators and automation & controls for the 4 Darlington units. We were selected thanks to our extensive expertise in nuclear energy, with 50% of the world nuclear steam turbines and more than 120 service agreements. This project will extend the plant’s life by 30 years.

30 years in life extension

YES. In just six months GE designed, manufactured and replaced a 40-year-old Stator Core for the Kriel power plant in South Africa. This was a first-of-its-kind, complex modification project in the region that brought back UNIT 2 into full service. The generator was originally built in 1971 by Brown Boveri Company,one of many legacy brands we support in our services business.