The 6F.01 gas turbine leads the industry for cogeneration and combined-cycle efficiency for gas turbines with an output range of less than 100 MW. Its tremendous exhaust energy allows the production of a high quantity of steam for either power generation or cogeneration. It achieves over 58 percent efficiency in 2x1 combined-cycle arrangement, and more than 80 percent efficiency in cogeneration operation.
Engineered to Deliver High Exhaust Energy
The 6F.01’s 600˚C exhaust temperature allows up to 140 bar high pressure steam.
Proven Experience with High Reliability and Availability
The 6F.01 has over 110,000 hours and 2,250 starts of operating experience on fleet leaders with 99.2 percent reliability over the past four years.
Features that Impress
Compact cold end drive configuration for new plants and a hot end drive option for 6B flange-to-flange replacement solution bringing more than 5 pts in efficiency improvement.
6F.01 Gas Turbine (50/60 Hz)
With its unique combination of high efficiency and low emissions, this gas turbine is a reliable, environmentally-friendly choice.
- Provides low-cost electricity production in a broad range of heat recovery applications
- 12-stage compressor provides 3D aerodynamics for high efficiency, removable blades for high reliability, cold end drive with axial exhaust for high efficiency, and 64kH major inspections intervals
- Combustion and hot gas path maintenance intervals of 32,000 hours and 900 starts
- Field-replaceable compressor airfoils are capable of wet compression power augmentation
- Proven hot gas path and combustion materials featured on 7F.05, 9F.05 and H-class turbines support higher temperatures
- Proven DLN 2.5 combustion system with over a decade of operating experience
FORMER NAMES:
Frame 6C
Tools & Resources
Explore our range of tools that let you choose products, keep them up and running, and enhance their power potential.
Our secure customer login experience provides seamless access to your GE information and assets.
Want to learn more about how our products stack up? Run the numbers with our comparison tool.
Generate performance and download reference drawings and documents for any of our heavy-duty gas turbine offerings.
Product Specifications
6F.01 |
|
|---|---|
| 50/60 | 50/60 Hz |
| SC Output (MW) |
57 |
| SC Net Heat Rate (Btu/kWh, LHV) |
8880 |
| SC Net Heat Rate (kJ/kWh, LHV) |
9369 |
| SC Efficiency (%, LHV) |
38.4% |
| Compressor Pressure Ratio | 21.4 |
| Exhaust Temp (°F/°C) |
1152/622 |
| Exhaust Energy (MMBtu/hr) |
305 |
| GT Min. Turn Down Load (%) |
40% |
| NOx Emission (@ 15% O2 ppm) |
25 |
| CO Emission (ppm) |
9 |
| Exhaust Energy (MM kJ/hr) |
322 |
| GT Ramp Rate (MW/minute) |
12 |
| Wobbe Variation (%) |
+/- 10% |
| Startup Time - Conventional / Peaking (min.) | 24/12 |
6F.01 |
|
|---|---|
| Block Configuration (GTs x STs) |
1x1 |
| CC Net Output (MW) |
85 |
| CC Net Heat Rate (Btu/kWh, LHV) |
5896 |
| CC Net Heat Rate (kJ/kWh, LHV) |
6221 |
| CC Net Efficiency (%, LHV) |
57.9% |
| Bottom Cycle Type | 3PNRH |
| HP Throttle Pressure (psia/bar) |
1740/120 |
| HP Throttle Temp (°F/°C) |
1050 |
| Reheat Temp (°F/°C) |
N/A |
| ST Configuration (Type) | STF-A100 |
| GT Generator Type (Cooling) | Air |
| ST Generator Type (Cooling) | Air |
| Plant Turndown - Minimum load (%) |
39% |
| Ramp Rate (MW/minute) |
12 |
| Startup Time (RR Hot, minutes) |
30 |
6F.01 |
|
|---|---|
| Block Configuration (GTs x STs) |
2x1 |
| CC Net Output (MW) |
171 |
| CC Net Heat Rate (Btu/kWh, LHV) |
5849 |
| CC Net Heat Rate (kJ/kWh, LHV) |
6171 |
| CC Net Efficiency (%, LHV) |
58.3% |
| Bottom Cycle Type | 3PNRH |
| HP Throttle Pressure (psia/bar) |
1740/120 |
| HP Throttle Temp (°F/°C) |
1050 |
| Reheat Temp (°F/°C) |
N/A |
| ST Configuration (Type) | STF-A200 |
| GT Generator Type (Cooling) | Air |
| ST Generator Type (Cooling) | Air |
| Plant Turndown - Minimum load (%) |
19% |
| Ramp Rate (MW/minute) |
24 |
| Startup Time (RR Hot, minutes) |
30 |