Power plant efficiency

GT13E2 MXL2 with AMP

GE’s additive manufactured performance (AMP) technology provides the driving force behind the upgrade for the GT13E2 gas turbine fleet, enabling better operating performance and hardware durability.

Compatible turbines

GT13E

Exhaust plenum and frame upgrade

GE’s Corrosion and Heat Resistant Original Equipment Manufacturer (CHROEM™) improved exhaust systems applies the latest GE technology to extend life and provide economic benefits through increased reliability, maintainability, and service life for operators.

Compatible turbines

6B

6B hot gas path interval extension

With a hot gas path combustion interval extension upgrade from GE, you can increase your gas turbine’s availability and reduce maintenance costs.

Compatible turbines

6B

Combustion interval extension

With a combustion interval extension upgrade from GE, you can increase your gas turbine’s availability and reduce maintenance costs.

Compatible turbines

6B

6B gas turbine reliability package

With our enhanced reliability package, your GE 6B gas turbine can be more than the workhorse of your plant. It can also act as a guard against failed trips, forced outages, and the loss of revenue that follows.

Compatible turbines

6B

9E enhanced turndown powered by axial fuel staging

The 9E enhanced turndown package is powered by axial fuel staging (AFS) and corrected parameter control (CPC). Each widens DLN1/DLN1+ systems load operation ranges with compliant emissions.

Compatible turbines

9E

9E Fast Start with static starter

With the rise of renewables and new competitive industry, operators are searching for ways to achieve faster, lower-cost, more precise starts. Learn about the benefits of GE’s Fast Start with static starter upgrade for the 9E gas turbine.

Compatible turbines

9E

9E.03 gas turbine AGP XPAND upgrade

Increase output, efficiency, and availability while reducing fuel consumption. GE’s advanced gas path (AGP) upgrade for 9E gas turbines increases performance and asset life for your key turbines.

Compatible turbines

9E

GE’s latest overspeed test upgrade

Avoid unsafe, expensive failures, and reduce the need for periodic tests of protection systems with GE’s upgraded test that runs quickly and automatically, at low risk, and without asset wear and tear.

Compatible turbines

6B, 6F, 7E, 7F, 9E, 9F

7Extend upgrade package

Extend life and restore performance for your 7B, 7E, and 7EA gas turbines with GE Gas Power's 7Extend Upgrade Package. Contact GE Power today!

Compatible turbines

7E

9E gas exhaust system upgrade

GE's gas turbine exhaust system upgrade improves system reliability and reduces repair costs for your 9E gas turbine. Contact GE Power today!

Compatible turbines

9E

Differential pressure transmitter

GE’s new differential pressure transmitters provide an upgrade for your existing anemometers to improve your gas turbine fleet’s reliability.

Compatible turbines

6B, 9E, 6F

Bently nevada 3500 vibration monitoring system

GE’s Bently Nevada 3500 Vibration System for LM6000, LM/TM2500, LM1600, and LM5000 gas turbines reduces non-critical trips, including noise-driven and transient vibration shutdowns.

Compatible turbines

LM1600, LM2500, LM5000, LM6000, TM2500

ActivePoint HMI

GE’s latest ActivePoint* HMI can help protect your plant from cyberattacks, improve operator experience, and increase both efficiency and plant performance.

Compatible turbines

GT13D, GT11D, 6B, 9E, GT11N2, GT11N, 7E, 9F, 6F, 7F, GT26, GT9, GT24, GT8

9F gas turbine AGP upgrade

GE’s Advanced Gas Path upgrade increases efficiency to deliver industry leading performance & operational flexibility. Learn more about the 9F AGP upgrade today.

Compatible turbines

9F

9EMax four-stage turbine

GE’s 9EMax four-stage gas turbine can be used to repower your existing 9E to reduce annual fuel costs and unlock significant revenue within the same footprint.

Compatible turbines

9E

9E gas turbine enhanced reliability upgrade

The 9E enhanced reliability upgrade acts as a guard against failed trips, outages, & revenue loss. Learn how this upgrade can be a workhorse of your plant.

Compatible turbines

9E

GT24 MXL2 upgrade

GE Gas Power can upgrade your GT24 gas turbine to operate in two modes. Learn how the GT24 MXL2 upgrade can increase flexibility and extend performance today.

Compatible turbines

GT24

GT8, GT11N, GT13D EV-alpha burner

GE’s EV-alpha burner for GT8, GT11N, and GT13D gas turbines with fuel gas represents the result of our continuing research and investment for the best in burner technology.

Compatible turbines

GT13D, GT11N, GT8

Gas turbine exhaust thermocouple

GE’s exhaust thermocouples upgrade provides more accurate exhaust gas temperature sensor readings, longer asset life, and reliable operations. Learn more.

Compatible turbines

7E, 9E, 6F, 7F, 9F, 6B

New

Gas turbine tuning

Generate power with less emissions and fuel. Make your gas turbine combustion controls smarter using AI/ML with Autonomous Tuning software.

Compatible turbines

LM6000, LM2500

Featured

Reliability packages save time and money

GE Gas Power's valve & instrumentation reliability solutions are developed to keep your F-class gas turbines running. Improve reliability to preserve revenue today.

Compatible turbines

9F, 7F

Robust exhaust frame upgrade for 7F & 9F gas turbines

Robust exhaust frames provide operational flexibility for 7F & 9F turbines. Avoid thermal stress during turndown & peaking with this exhaust liner upgrade.

Compatible turbines

7F, 9F

7F high output stage 0 compressor

GE’s background in developing and testing enhanced compressor technology has led to our latest upgrade: the 7F flared high output stage 0 compressor.

Compatible turbines

7F

7EA high output robust compressor upgrade

GE's high output robust compressor (HORC) upgrade for 7EA gas turbines boosts output and exhaust energy while also preventing clashing events. Learn more here.

Compatible turbines

7E

Advanced extendor upgrade

GE's advanced extendor upgrade for combustor parts leads to proven durability and longer life. Reduce component wear & combustion repair costs today.

Compatible turbines

GT13E2 MXL2 upflow compressor gas turbine upgrade

GE can upgrade GT13E2 MXL2 compressors nearing their end-of-service. See how GE’s Upflow Compressor upgrade grants higher gas turbine output and efficiency.

Compatible turbines

7F Axial Fuel Staging (AFS)

Attain lower turndown, emissions and reduce maintenance costs with GE's 7F Axial Fuel Staging (AFS) gas turbine upgrade for further turndown capability.

Compatible turbines

7F

7E gas turbine enhanced capacity upgrade

Get the most out of your existing 7E gas turbine. Increase your capabilities and energy revenue with GE's 7E gas turbine enhanced capacity upgrade.

Compatible turbines

6F.03 gas turbine AGP upgrade

Increase output and time between inspections, while also reducing annual baseload costs with the advanced gas path (AGP) upgrade for 6F.03 turbines.

Compatible turbines

6F

9E gas turbine AGP upgrade

GE’s 9E Advanced Gas Path upgrade delivers industry-leading efficiency and increased output. Start driving operational flexibility with the 9E AGP today.

Compatible turbines

6B gas turbine AGP upgrade

GE’s Advanced Gas Path (AGP) upgrade will increase the availability and output of your 6B turbine. Extend the assets of your 6B turbine today with AGP.

Compatible turbines

6B

GT13E2 EV-alpha burner

GE’s EV-alpha burner uses state-of-the-art combustion technology to help reduce nitrous oxide emissions by approximately 35%.

Compatible turbines

Gas to dual fuel—LM6000

GE’s gas to dual-fuel upgrade enables your LM6000 turbine to run on either gas or liquid fuel, with or without water injection for NOx control.

Compatible turbines

Gas to dual fuel—LM2500

GE’s gas to dual-fuel upgrade enables your LM2500 turbine to run on either gas or liquid fuel, with or without water injection for NOx control.

Compatible turbines

LM2500

Advanced secondary fuel nozzle upgrade

Learn how the advanced secondary gas turbine fuel nozzle unlocks flexibility & provides value across a wide range of parameters via additive manufacturing.

Compatible turbines

7E, 9E

Gas turbine compressor bleed valve upgrade

Improve the reliability and availability of your 7F or 9F gas turbines' critical cooling and sealing air system with GE's stainless-steel compressor valves.

Compatible turbines

7F, 9F

Valve tracking logic for trip mitigation

GE’s valve tracking logic for trip mitigation is an application software enhancement developed to improve TMR robustness and mitigate the risk of unit trip.

Compatible turbines

Electric gas control valves and electric inlet guide vane actuator

Replacing your hydraulically actuated gas valves and inlet guide vane actuator with electrically actuated gas valves can help ensure long-term system safety and improve the reliability of your complete gas turbine and accessories

Compatible turbines

Rotor-in major inspection for gas turbines

Alleviate safety concerns, reduce costs and save time with GE's rotor-in major turbine inspections. Learn more with GE.

Compatible turbines

Dry Low NOx (DLN 2.6) combustion upgrade

The GE Dry Low NOx (DLN 2.6) combustion system gas turbine upgrade can provide flexibility and reduced emissions. Enhance your F-class gas turbine today.

Compatible turbines

9F, 6F, 7F

F-class enhanced compressor packages

Improve reliability and durability of your turbine with GE’s compressor package for F-class gas turbines. Enhance your gas turbine performance today.

Compatible turbines

7F gas turbine advanced compressor

Learn more about GE Power's gas turbine advanced axial compressor upgrade solution. Improve your 7F's output by up to 16% and efficiency up to 3% today.

Compatible turbines

6B repowering upgrade

GE’s 6B repowering upgrade improves performance in both gas turbine and combined-cycle operation while maintaining the unit’s reliability and fuel flexibility.

Compatible turbines

6B

TDI clutch upgrade

GE’s upgrade to your hydraulic starter clutch allows the existing starting system to operate with enhanced reliability and availability.

Compatible turbines

Sump evacuation system

GE’s sump evacuation system upgrade eliminates oil leaks during low-power operation, engine load rejects, or trips from high power.

Compatible turbines

Low loss gas turbine bearing upgrade

GE Power’s low loss gas turbine bearing upgrade can help reduce turbine shaft losses from reduced mechanical friction. Contact GE Power today.

Compatible turbines

6B gas turbine enhanced reliability upgrade

Even at 99% reliability, learn how 6B gas turbines reduce trip risk, stabilize steam supply, & improve overall operability with GE's enhanced reliability upgrade.

Compatible turbines

Gas turbine repowering

GE’s flange-to-flange upgrade is a full replacement of an existing gas turbine engine, giving you innovation within the footprint of your existing asset.

Compatible turbines

7E, 9E, 7F, LM5000, LMS100, 6B

7F gas turbine AGP upgrade

Our advanced gas path upgrade can increase efficiency & extend reliability. Explore GE's AGP Flex, Peaker, Standard & Tech upgrades for 7F gas turbines.

Compatible turbines

7F

GT13E2 operation & maintenance upgrade

Improve your fleet's adaptability and mitigate engine aging in changing conditions with GE Power's operation & maintenance upgrade for GT13E2 gas turbines.

Compatible turbines

GT13E

LM6000 hybrid EGT

GE’s LM6000 Hybrid EGT upgrade integrates a battery energy storage system with the LM6000 gas turbine, enabling contingency (spinning) reserve without fuel-burn between demand events.

Compatible turbines

Fast start for KA26

GE’s Flex Start for KA26 enables you to connect and generate power to the grid faster and more economically by optimizing GT synchronization, combined-cycle startup, and GT/ST loading.

Compatible turbines

B- and E-class combustion fuel flexibility

GE’s B-/E-class combustion systems can help you to accommodate a full range of fuel alternatives, as well as switch from one fuel to another while running under load or during shutdown.

Compatible turbines

GT11N2 M upgrade

GE’s GT11N2 M upgrade combines new technological developments with existing proven gas turbine designs to facilitate competitiveness of your plant.

Compatible turbines

LM2500 and LM6000 fuel condition monitoring

GE’s fuel variability control provides increased system response for your existing LM2500 and LM6000 gas turbines to help avoid issues caused by changes in fuel composition.

Compatible turbines

7E capacity performance package

Learn how the 7E turbine capacity performance package offers wider load operation and compliant emissions via axial fuel staging & corrected parameter control.

Compatible turbines

Liquid to dual fuel LM2500

GE’s liquid to dual-fuel upgrade enables your LM2500 turbine to be run on either gas or liquid fuel, with or without water injection for NOx control.

Compatible turbines

LM6000 peak performance upgrade

GE’s LM6000 Peak Performance upgrade enables your LM6000PC to achieve up to 5% more output over current nominal power through peak firing; increased monitoring algorithms track life impact.

Compatible turbines

GT24/GT26 low part load gas turbine upgrade

GE’s GT24/GT26 sequential combustion engine upgrade can enable your combined-cycle plant to achieve best-in-class turndown.

Compatible turbines

GT8C XL gas turbine upgrade

GE’s blading upgrade for GT8C XL gas turbines provides performance neutrality and longer spans between C-inspection intervals from 24 to 32 kEOH, reducing downtime and maintenance costs.

Compatible turbines

Performance improvement package

GE’s performance improvement package (PIP) enhances performance and extends the hot gas path component life of your B-/E-class gas turbine units.

Compatible turbines

Liquid fuel reliability systems upgrade for 7F gas turbines

GE's liquid fuel system reliability upgrade yields greater efficiency and safety for 7F gas turbines. Boost your liquid fuel system reliability today.

Compatible turbines

Direct drive ventilation fan upgrade

GE’s direct drive ventilation fans drop-in upgrades are designed to replace your current fans with limited disruption and can eliminate over-tensioning, overloaded bearings, and fan failure.

Compatible turbines

LM/TM2500 SAC to DLE

GE’s LM/TM2500 SAC to DLE upgrade converts your LM/TM2500 SAC gas turbine to DLE technology, eliminates water consumption for NOx control, and improves thermal efficiency.

Compatible turbines

Gen 3 ESM (exhaust spread monitor)

GE’s Gen 3 ESM (Exhaust Spread Monitor) improves on our ESM2100 with a Modified Exhaust Spread Algorithm (MESA). This latest generation improves running reliability, resulting in longer response times to tackle thermocouple faults, along with increased uptime and fewer trips due to more robust handling of failures.

Compatible turbines

Fire protection panel upgrade

GE’s fire protection upgrade is NFPA-compliant and mounted in the turbine control panel to closely monitor gas and flame sensors.

Compatible turbines

Primary frequency control upgrade

GE’s algorithm upgrade to your primary frequency control (PFC) is customized for specific grid requirements, enabling continuous plant equipment operation between 47 and 52 Hz.

Compatible turbines

S7 fuel control upgrade

GE’s S7 fuel control upgrade enables updates created to improve the reliability, availability, and performance of your LM6000 gas turbine.

Compatible turbines

Gas turbine alternative fuel retrofit upgrade

The alternative fuel retrofit upgrade easily allows turbines to burn fuels such as hydrogen and coke oven gas. Learn more about GE’s alternative fuel retrofit.

Compatible turbines

Cross-fleet repowering with aero

Regardless of your original equipment manufacturer, GE has the latest aeroderivative gas turbine repowering technology to make your units economically viable again.

Compatible turbines

Non-optical flame detector

GE’s non-optical flame detector keeps a close watch on your combustor. Get rid of outdated sensors, and avoid risky flame failures that lead to unplanned outages.

Compatible turbines

Gas turbine control system upgrade—MicroNet Plus

The MicroNet Plus gas turbine control system interfaces with field devices and on-engine hardware for core fuel control, package sequencing, & protection.

Compatible turbines

9F.05 gas turbine CUSP (compressor unit-specific protection) upgrade

GE’s Compressor Unit-Specific Protection (CUSP) can help with 9F.05 gas turbine issues from increased inlet bleed heat (IBH). Learn about the upgrade today.

Compatible turbines

Xtend hot section upgrade—DLE

GE’s Xtend* upgrade for LM2500 and TM2500 Base DLE 1.0 engines increases the hot section life to 50,000 hours, reduces lifecycle costs, and increases site availability.

Compatible turbines

LM6000PC SAC extended fife combustor upgrade

GE’s LM6000PC SAC extended life combustor upgrade alleviates issues with anti-rotation tabs and coating loss, preserving combustor performance and extending downstream component life.

Compatible turbines

Remote VSV monitoring

GE’s remote VSV monitoring upgrade allows remote monitoring of the variable stator vanes without having to enter the package and take manual engine readings.

Compatible turbines

Water injection for NOx reduction

GE’s water injection system upgrade for non-dry low emissions turbines (without a NOx abatement system) can reduce NOx emissions to 25 ppm (gas fuel) or 42 ppm (liquid fuel).

Compatible turbines

9E advanced compressor upgrade

GE’s material & diagnostic enhancements act as a single upgrade for your 9E’s inlet system & compressor. Learn more about how it guards against risky failures.

Compatible turbines

4-hour gas turbine lockout prevention

GE’s lockout prevention upgrade for LM/TM2500 and LM6000 gas turbines prevent the 4-hour lockout period after a hot shutdown, reducing risk to rotors, increasing machine safety, and preserving uptime.

Compatible turbines

LM6000 flange to flange replacement

GE’s flange-to-flange upgrade for LM6000 gas turbines, a full replacement of your aeroderivative gas turbine engine, reduces operating expenses and emissions, and can reset asset life to zero.

Compatible turbines

LM5000 to LM6000 repower

GE’s LM6000 aeroderivative upgrades your existing LM5000 gas turbine to provide greater plant output and efficiency; for 60 Hz operation, it is an economical replacement for the LM5000.

Compatible turbines

Automatic voltage regulator upgrade

GE’s EX2100e upgrade builds on the EX2100 experience of over 1,200 units in gas, steam, and hydro applications, providing enhanced reliability, availability, and performance with advanced algorithms.

Compatible turbines

LM6000PC uprate gas turbine upgrade

GE’s LM6000PC upgrade increases power, water savings, and lifespan, without requiring gearbox changes, within the same package and engine footprint as the LM6000PC gas turbine.

Compatible turbines

Super-polished high-pressure compressor blades

GE’s super-polished compressor blades reduce compressor blade and vane fouling rates and increase uptime, helping to maintain compressor performance over time.

Compatible turbines

GT11DXC compressor upgrade

GE’s GT11DXC upgrade uses advanced aerodynamic blading to provide high reliability, availability, and maintainability of your compressor without increasing stress on the components.

Compatible turbines

Development in process

Clutchless synchronous condenser upgrade

GE’s clutchless synchronous condenser upgrade increases reactive-power capability for LM2500 gas turbines by allowing the generator to act as a synchronous condenser.

Compatible turbines

Thrust balance valve removal

GE’s thrust balance valve (TBV) upgrade adds an on-engine tube and an in-line plate orifice, helping to reduce mechanical failures associated with the TBV.

Compatible turbines

Xtend hot section upgrade—SAC

GE’s Xtend* upgrade for LM2500 and TM2500 Base SAC 1.0 engines increases the hot section life to 50,000 hours, reduces lifecycle costs, and increases site availability.

Compatible turbines

GT13E1 MC2 gas turbine upgrade

GE’s GT13E1 MC2 upgrade significantly improves performance and increases life between inspections by 50% by combining turbine, compressor, and combustor parts into one package.

Compatible turbines

KA26 low load operation

GE’s KA26 Low Load Operation upgrade enables you to park your GT26 fired combined-cycle plant at extremely low load while remaining compliant with emission requirements.

Compatible turbines

LM6000 fast start upgrade

GE’s Fast Start upgrade enables your LM6000 to reach full load in 5, 8, or 10 minutes, reducing start-up time and helping to meet peak turbine demand.

Compatible turbines

GT13E2 MXL2 upgrade

GE’s GT13E2 MXL2 upgrade, designed to be compatible with all installed GT13E2 units, combines GE’s latest technology developments with more than 10 million operating hours of GT13E2 fleet experience.

Compatible turbines

GT26 high efficiency gas turbine upgrade

The GT26 HE upgrade blends F- and H-Class technologies, delivering unmatched gas turbine reliability and availability with higher performance.

Compatible turbines

T-fire solutions for gas turbines

GE's T-Fire solutions uprate the gas turbine firing temperature of 6B, 7E and 9E units. Upgrade plant performance with GE Power's T-Fire solutions.

Compatible turbines

LMS100PA+ upgrade

GE’s LMS100PA+ upgrade provides more than 100 MW of power without affecting heat rate, emissions, or reliability, despite increasing energy consumption.

Compatible turbines

GT11NM XL/XP turbine upgrade

Let GE increase the performance of your GT11NM XL and XP turbines—with a flexible upgrade that boosts efficiency.

Compatible turbines

Asymmetric diffuser—LM/TM2500

In the face of footprint restrictions, GE’s asymmetric diffuser helps mitigate pressure losses downstream of your power turbine.

Compatible turbines

Variable inlet guide vanes (VIGV) with EFS

Upgrade your LM6000 gas turbine with variable inlet guide vanes with EFS from GE Gas Power. Take the next step in enhancing your gas turbine performance.

Compatible turbines

Liquid to dual fuel—LM6000

GE’s liquid to dual-fuel upgrade enables your LM6000 turbine to be run on either gas or liquid fuel, with or without water injection for NOx control.

Compatible turbines

Evaporative cooler

GE’s evaporative cooling system upgrade increases power output and efficiency for sites with high ambient temperatures and low relative humidity.

Compatible turbines

Dry low NOx upgrade for E-class turbines

Our dry low NOx emissions (DLN) combustion system upgrade improves emissions compliance with new flexibility. Increase the value of your E-class turbines today.

Compatible turbines

LM/TM2500 base to plus/plus G4

GE’s LM2500 and TM2500 models can be updated to the current LM2500+ or LM2500+G4 configuration for enhanced output and improved thermal efficiency.

Compatible turbines

SPRINT LM6000

GE’s SPray INTercooling (SPRINT) increases the output of the LM6000 gas turbine by cooling combustion air, providing a greater mass flow through the low-pressure and high-pressure compressors.

Compatible turbines

GT9D1X performance improvement package

GE’s modular GT9D1x Performance Improvement Package, introduced to address customer-specific requirements, provides increased performance and reduced maintenance costs.

Compatible turbines

GT11NMC XL/XP turbine and compressor upgrade

GE’s GT11NMC compressor upgrade can substantially increase power output and reduce CO2 emissions for your plant.

Compatible turbines

GT13E2 AEV burner

GE’s AEV Burner employs a new continuous fuel variation concept as the basis for more flexible and reliable operation as demand increases.

Compatible turbines

Inlet air chilling system

GE’s inlet chilling system cools compressor intake air, increasing the air density and output of your critical engines.

Compatible turbines

Anti-icing upgrade

GE’s anti-icing system prevents ice-related internal damage to engine blades through automated controls that run when ice is detected.

Compatible turbines

GT11DM turbine upgrade

GE’s GT11DM turbine upgrade increases power output and efficiency, and reduces fuel costs and CO2 emissions.

Compatible turbines

GT13DM and GT13DC+ turbine upgrade

GE’s GT13DM and GT13DC+ turbine upgrades provide increased availability and reliability.

Compatible turbines

Fast start for GT base fleet turbines

GE’s Fast Start reduces turbine startup time for GT base fleet gas turbines. Learn more about how you could reach full load within just 10-15 minutes.

Compatible turbines