GE’s 9HA high efficiency, air-cooled gas turbine is one of the industry leaders among H-class offerings, and now the 9HA gas turbine is at the heart of the world's most efficient combined-cycle power plant.
With over 450 units deployed to more than 40 countries, GE has the largest operating and most experienced OEM F-class fleet in the world. Our 9F gas turbine delivers consistent performance and accommodates a diverse range of fuels, making it great for a variety of combined cycle and CHP applications.
| 9F.04 | |
|---|---|
| Net output (MW) | |
| Net heat rate (kJ/kWh, LHV) | |
| Net efficiency (%, LHV) | |
| Net heat rate (Btu/kWh, LHV) |
9F series turbines are GE’s most advanced F-class technology for 50 Hz applications.
GE’s 7HA high efficiency air-cooled gas turbine is one of the industry leaders among advanced class gas turbine offerings and is available in three models—the 7HA.01 at 290 MW, the 7HA.02 at 384 MW, and the 7HA.03 at 430 MW.
The demands of today’s power generation industry are many: low cost of electricity, dispatch volatility, along with high efficiency, reliability, and asset availability. With approximately 950 installed units producing ~175GW of power in 11 countries, GE’s 7F.04 and 7F.05 gas turbines are proven performers in all these areas.
| 7F.04 | 7F.05 | |
|---|---|---|
| Net output (MW) | ||
| Net heat rate (kJ/kWh, LHV) | ||
| Net efficiency (%, LHV) | ||
| Net heat rate (Btu/kWh, LHV) |
7F series gas turbines can balance renewables by load-following at 40 MW/min ramp rates while maintaining emissions compliance.
With unprecedented operational flexibility, robust engineering and long operation intervals, the GT13E2 can be used in many different applications—all while meeting a very broad range of environment and operating conditions.
| GT13E2-190 | GT13E2-210 | |
|---|---|---|
| Net output (MW) | ||
| Net heat rate (kJ/kWh, LHV) | ||
| Net efficiency (%, LHV) | ||
| Net heat rate (Btu/kWh, LHV) |
GT13e2 gas turbines can run on up to 30% hydrogen fuel.
Formerly known as the Frame 9E, GE Gas Power’s 9E gas turbine can help decrease costs and increase revenue for your plant. From the desert to the tropics to the arctic, the rugged 9E.03 heavy-duty gas turbine provides essential power and performs in a vast number of duty cycles and applications. The 9E.04 gas turbine provides increased power and performance while maintaining the simplicity and operational strengths of the 9E.03.
| 9E.03 | 9E.04 | |
|---|---|---|
| Net output (MW) | ||
| Net heat rate (kJ/kWh, LHV) | ||
| Net efficiency (%, LHV) | ||
| Net heat rate (Btu/kWh, LHV) |
9E series gas turbines can run on 52 types of fuel.
A single, economical solution for the dispatch needs of nearly every industry condition.
| LMS100 PA+ | LMS100 PB+ | |
|---|---|---|
| Net output (MW) | ||
| Net heat rate (kJ/kWh, LHV) | ||
| Net efficiency (%, LHV) | ||
| Net heat rate (Btu/kWh, LHV) |
LMS100 gas turbines can start up in 8 minutes
The 7E.03 gas turbine is recognized as an industry leader for 60 Hz industrial power applications. Its robust architecture and operational flexibility make it well-suited for a variety of peaking, cyclic, and baseload operations. With state-of-the-art fuel handling equipment, multi-fuel combustion system options, and advanced gas path features, the 7E gas turbine can accommodate a full range of fuel alternatives while helping to deliver better efficiency and lower emissions than other technologies in its class.
| 7E.03 | |
|---|---|
| Net output (MW) | |
| Net heat rate (kJ/kWh, LHV) | |
| Net efficiency (%, LHV) | |
| Net heat rate (Btu/kWh, LHV) |
7E series gas turbines can deliver 100% load in 10 minutes.
GE’s 6F gas turbines offer the superior performance, reliability, and flexibility typically associated with larger power plants. The 6F models, including the 6F.01 and the 6F.03 gas turbines, pack a lot of power into a small package, offering durability and flexibility for harsh, remote, or floating power environments. Whether it be for 50 or 60 Hz, the 6F gas turbines maintain best-in-class efficiency and exhaust energy for combined cycle and CHP performance. The 6F.01 and 6F.03 offer segment-leading approximately 32,000-hour combustion and hot gas path inspection intervals.
| 6F.03 | 6F.01 | |
|---|---|---|
| Net output (MW) | ||
| Net heat rate (kJ/kWh, LHV) | ||
| Net efficiency (%, LHV) | ||
| Net heat rate (Btu/kWh, LHV) |
6F gas turbines offer fuel flexibility and hydrogen capability while maintaining the reliability you’ve come to depend on
A leader in the +40 MW space, the LM6000 has over 40 million operating hours and more than 1,300 units shipped.
| LM6000 PG | LM6000 PF | LM6000 PF+ | LM6000 PC | |
|---|---|---|---|---|
| Net output (MW) | ||||
| Net heat rate (kJ/kWh, LHV) | ||||
| Net efficiency (%, LHV) | ||||
| Net heat rate (Btu/kWh, LHV) |
LM6000 gas turbines can start up in 5 minutes
Its ability to operate in island mode, coupled with multiple decades of proven rugged performance, make the 6B.03 an excellent solution for remote installations and extreme operating conditions. The rugged, reliable 6B.03 heavy-duty gas turbine is a popular choice for refineries, natural gas liquefaction power, CHP applications, and industrial power.
| 6B.03 | |
|---|---|
| Net output (MW) | |
| Net heat rate (kJ/kWh, LHV) | |
| Net efficiency (%, LHV) | |
| Net heat rate (Btu/kWh, LHV) |
6B gas turbines can operate on a wide range of non-standard gas or liquid fuels, including over 90% hydrogen
The LM2500 family of aeroderivative gas turbines boasts several times the operating experience of its competitors combined, and its flexibility and reliability are unsurpassed.
| LM2500XPRESS +G4 DLE | LM2500XPRESS +G5 DLE | LM2500 +G4 | LM2500 +G4 DLE | |
|---|---|---|---|---|
| Net output (MW) | ||||
| Net heat rate (kJ/kWh, LHV) | ||||
| Net efficiency (%, LHV) | ||||
| Net heat rate (Btu/kWh, LHV) |
LM2500 gas turbines feature >99.8% availability
Introducing one of the world’s most modular, reliable, and experienced mobile gas turbines.
| TM2500 | |
|---|---|
| Net output (MW) | |
| Net heat rate (kJ/kWh, LHV) | |
| Net efficiency (%, LHV) | |
| Net heat rate (Btu/kWh, LHV) |
TM2500 gas turbines can be installed and commissioned in 11 days
Our portfolio of gas turbine upgrades helps you meet today’s challenges—and tomorrow’s. Select your turbine and your upgrade goals and discover how to increase your plant’s potential.
Select your turbine
All models
Your need (select all applicable)
Want to learn more about how we can tailor a power solution that’s right for you? Contact us to get started.
The energy landscape is transforming rapidly. How can we continue to deliver power that is reliable, affordable, and more sustainable? Join our webinar to explore the current and future challenges of our energy infrastructure and learn about the latest energy supply and delivery technologies.
When it comes to climate action, it all starts with power. It starts with us building a safer, cleaner, and more secure future for everyone.
Watch GE Power CEO Scott Strazik at Reuters Energy Transition event to hear how to “dramatically move the needle every single day with the technology we have”.
*Trademark of General Electric Company
