Overview of CygNet Data Collector

The Historian CygNet Data Collector gathers data samples from a CygNet Server and stores the corresponding data entries into the Historian Server. This collector supports collecting of Analog, Digital and String type of data from CygNet Server. This collector supports a distributed model, where the CygNet Server, the Collector, and Historian are installed on different machines. Typically, however, the collector is installed on the same computer as the CygNet Server and sends data to a remote Historian server.

The CygNet collector uses unsolicited collection, whereby changes to the CygNet tags are detected, and are forwarded to the Historian server. The collector is intended to duplicate raw samples from the CygNet into the Historian data archive.

At the time of collector browse, CygNet-Collector connects with CygNet using CxScript64.dll API component and queries the CygNet FAC (Facility Service) and PNT (Point Service) services associated with the CVS (Current Value Service).

The CygNet Point Value is mapped to the GE Historian server as a Collector tag for data collection. CygNet Collector stores VHS (Value History Service) points UDCs(Uniform Data Codes) as Tag source address.

Once all CygNet Points associated with the selected CVS/VHS have been mapped to Historian tags, the collector begins querying from VHS service to pull data from CygNet to Historian.
Note: The CygNet ODBC Driver (Client tools) is required for the CygNet Collector service to start, however, the CygNet ODBC Driver does not ship with Historian. If the CygNet ODBC Driver for CygNet is not installed, the CygNet Collector will not connect to the CygNet server. If you install the CygNet Collector on a machine that does not contain your CygNet Server, be sure to install the CygNet ODBC Driver for CygNet on the machine with the CygNet Collector.

Refer to the following topics for more information: