GE Additive Arcam EBM launches D-material support for Pure Copper and Highly Alloyed Tool Steel

November 19, 2019

Collaborative approach furthers unlock the potential of electron beam melting

Frankfurt, Germany – GE Additive Arcam today announced general release of development material (D-material) support for pure copper and highly-alloyed tool steel during 2020.

Offering new materials builds on the many of the commonly known technology benefits of electron beam melting (EBM), such as high productivity and deep materials experience with crack prone alloys, but also some of the lesser known benefits including; the technology’s clean build environment, low oxidation and low reflectivity.

 

Collaborative Approach and Customer Demand

The addition of pure copper and tool steel is a direct response to increased customer interest.  Offered to all customers as a general release on both pure copper and tool steel, a D-material describes the maturity of process parameters for a specific material of family of materials. D-materials meet mechanical requirements for test bars on a limited build envelope to relevant industrial standards.

Obtaining the same properties for complex geometries requires additional development, resulting in an industrialized material (I-material) - with process parameters optimized for production on specific customer applications with mechanical and chemical properties.

The GE Additive AddWorks team is available to provide guidance and support on the right process parameters for their applications and with mechanical and chemical requirements for both materials. It is also anticipated that some customers will manage customization in-house themselves.  

“This general release of D-material support for pure copper and tool steel is an exciting development and opens up EBM to wider range of industries and applications. We have opted to take an open, collaborative approach and will review feedback from customer using the D-material, and gauge their long-term interest, before considering how we approach industrializing the materials,” said Karl Lindblom, general manager, Arcam EBM.

 

Benefits of Pure Copper and EBM

EBM is the only commercial available technology for additive manufacturing of crack prone alloys.  Higher levels of carbon in the steel mix increase the material’s propensity to crack during production with large temperature gradients. This makes high carbon level steels unsuitable for additive manufacturing process with cold ambient temperatures such as laser powder bed fusion (PBF).

The result is a higher performance component at reasonable cost.

Copper’s ability to absorb energy varies with the wavelength of the energy source. Pure copper absorbs 80% of the energy from an electron beam, compared to only 2% of the energy from a red laser beam.  This provides EBM with an advantage in terms of the ability to melt and ultimately productivity gains.

The vacuum environment in which EBM operates minimizes the oxygen pick-up in copper, allowing for high conductivity copper to be produced. Oxygen reduces the conductivity of copper, while also embrittling the component.

Other additive manufacuting techniques increase productivity in copper production through the addition of alloying elements. Adding alloying elements decreases copper’s ability to conduct.

Compared to other additive manufacturing techniques, only EBM can provide the combination of geometrical freedom, high productivity and high conductivity.  While other technology providers claim to have copper processes, these are inevitably alloyed to improve laser absorption and productivity and cannot reach the same purity, and thereby conductivity, as EBM.

The ability to produce unique, complex geometries in pure copper without compromising the high electrical, or thermal conductivity is ideally suited to a range of sectors, including the automotive industry, or customers looking at applications for electrical connectors, induction coils and heat exchangers.

 

Benefits of Tool Steel and EBM

EBM is the only commercial available technology for additive manufacturing of crack prone alloys.  Higher levels of carbon in the steel mix increase the material’s propensity to crack during production with large temperature gradients. This makes high carbon level steels unsuitable for additive manufacturing process with cold ambient temperatures such as laser powder bed fusion (PBF).

EBM technology can process high crack-prone alloys due to high build temperature and achieve the design complexity, which cannot achieved with conventional production processes. The EBM’s vacuum environment is perfect for material protection and mitigates the introduction of impurities.

The Arcam EBM Spectra H system is a perfect match for materials that require hot processes because of their crack prone nature while also having a large build volume capable of stacking many parts per build and High Power increasing productivity.

This results in a significant reduction of process steps going from powder to complex part, in both product development and the production process.